PlainWorker
Employers › TX

Manufacturing · Fort Worth, TX

Cleburne Metal Works, LLC.

According to OSHA enforcement records (2010–2026), Cleburne Metal Works, LLC. ranks #52,951 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 7 violations across 3 inspections.

Lower half by penalty29% serious
$5,428
OSHA penalties
7
Violations cited
3
OSHA inspections
#52,951
of 99,447 penalized employers

Cleburne Metal Works, LLC. in Fort Worth, TX has been the subject of 3 OSHA workplace inspections and 7 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $5,428. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Cleburne Metal Works, LLC. 3 times over 1 year - more than twice a year on average. These inspections resulted in 7 violations, averaging 2.3 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #52,951 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Intelligencer Printing Company in Lancaster, PA is another manufacturing employer with 3 OSHA inspections on record and $5,430 in current penalties.

2.3
violations per inspection
28.6%
of violations were serious
#52,951
of 99,447 penalized employers

Compliance score

D 56/100
  • D OSHA safety compliance: 7 violations across 3 OSHA inspections (2.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Cleburne Metal Works, LLC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Cleburne Metal Works, LLC. runs moderately below peers (0.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$5,428 Top 47% most affordable more affordable than 53% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Cleburne Metal Works, LLC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.01.310.419.528.637.6OSHA inspectionsViolations citedPAN-O-GOLD BAKING CO., OSHA inspections: 3 · Violations cited: 14YENKIN-MAJESTIC PAINT CORPORATION, OSHA inspections: 3 · Violations cited: 27SCHREIBER FOODS, INC., OSHA inspections: 3 · Violations cited: 6FOOD INGREDIENTS TECHNOLOGY COMPANY, L.L.C., OSHA inspections: 3 · Violations cited: 7P & M STEEL COMPANY, OSHA inspections: 3 · Violations cited: 23PRATT (JET CORR), INC., OSHA inspections: 3 · Violations cited: 8TULIP RICHARDSON CORPORATION, OSHA inspections: 3 · Violations cited: 14HAVELOCK WOOL, LLC, OSHA inspections: 3 · Violations cited: 21ATLANTIC CASTING & ENGINEERING CORPORATION, OSHA inspections: 3 · Violations cited: 6VENTURA FOODS, LLC, OSHA inspections: 3 · Violations cited: 6GORDON PAPER COMPANY, INC., OSHA inspections: 3 · Violations cited: 29ORAN SAFETY GLASS INC, OSHA inspections: 3 · Violations cited: 36NIELSEN & BAINBRIDGE, LLC., OSHA inspections: 3 · Violations cited: 8ALTRA INDUSTRIAL MOTION, INC., OSHA inspections: 3 · Violations cited: 14CLEARFIELD METAL TECHNOLOGIES INC., OSHA inspections: 3 · Violations cited: 15BLOOMFIELD FOUNDRY, INC., OSHA inspections: 3 · Violations cited: 35POLYMER TECHNOLOGIES AND SERVICES, INC., OSHA inspections: 3 · Violations cited: 21DISPLAY PACK INC, OSHA inspections: 3 · Violations cited: 12R & R CONSTRUCTION, INC., OSHA inspections: 3 · Violations cited: 4SMI HOLDINGS DBA STAMPEDE MEAT, INC., OSHA inspections: 3 · Violations cited: 3Cleburne Metal Works, LLC., OSHA inspections: 3 · Violations cited: 7
Cleburne Metal Works, LLC. has 3 OSHA inspections on record and 7 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Cleburne Metal Works, LLC. in the Manufacturing enforcement ledger

In Manufacturing, Cleburne Metal Works, LLC. sits at penalty rank #22,278 of 35,243 penalized establishments ($5,428 assessed).

How Cleburne Metal Works, LLC. Compares

Cleburne Metal Works, LLC.'s 2.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.3x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2023-02-13

Last Inspection

2023-10-25

Inspection Span

1 yr

Violations / Inspection

2.3

Avg Penalty / Inspection

$1,809

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 1 year, averaging 2.3 violations per visit. That's $1,809 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

28.6% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

71.4% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$9,043

Current Penalty Amount

$5,428

Penalty Reduction

40.0%

What this shows Penalties were reduced by $3,615 from the initial assessment of $9,043. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Cleburne Metal Works, LLC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Cleburne Metal Works, LLC. Industry Avg
Inspections 3 2.6
Violations 7 8.0
Total Penalty $5,428 $15,763
Avg Penalty per Inspection $1,809 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Cleburne Metal Works, LLC., both outside TX so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($5,428 here).

Forest River INC $5,428 IN Intelligencer Printing Company $5,430 PA LTR Products, LLC $5,425 WI Ovidon Manufacturing LLC $5,425 MI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Pan-O-Gold Baking CO. 3 insp. Sun Prairie, WI Yenkin-Majestic Paint Corporation 3 insp. Columbus, OH Schreiber Foods, INC. 3 insp. Shippensburg, PA Food Ingredients Technology Company, L.L.C. 3 insp. Anniston, AL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Forest River INC
Goshen, IN
3 inspections $5,428
Intelligencer Printing Company
Lancaster, PA
3 inspections $5,430
LTR Products, LLC
Mosinee, WI
2 inspections $5,425
Ovidon Manufacturing LLC
Howell, MI
3 inspections $5,425
Tennessee Galvanizing INC
Jasper, TN
2 inspections $5,425

Compare Cleburne Metal Works, LLC. vs Forest River INC side-by-side →

What to do with this record

Use Cleburne Metal Works, LLC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Cleburne Metal Works, LLC. against Forest River INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Cleburne Metal Works, LLC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Cleburne Metal Works, LLC. safe to work at? ▼
Based on OSHA records, Cleburne Metal Works, LLC.'s workplace safety record is mixed, with some compliance concerns. The employer has 7 violations across 3 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Cleburne Metal Works, LLC. have? ▼
Cleburne Metal Works, LLC. has 7 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $5,428.
How many OSHA inspections has Cleburne Metal Works, LLC. had? ▼
Cleburne Metal Works, LLC. has had 3 OSHA inspections, with the first recorded on 2023-02-13 and the most recent on 2023-10-25. This averages 2.3 violations per inspection.
What is the total penalty amount for Cleburne Metal Works, LLC.? ▼
Cleburne Metal Works, LLC. has been assessed $5,428 in current OSHA penalties, reduced from an initial assessment of $9,043 (a 40.0% reduction).
Does Cleburne Metal Works, LLC. have any serious or willful violations? ▼
Yes. Cleburne Metal Works, LLC. has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Cleburne Metal Works, LLC. operate in? ▼
Cleburne Metal Works, LLC. operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Cleburne Metal Works, LLC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Cleburne Metal Works, LLC. ranks #52,951 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Cleburne Metal Works, LLC.'s safety record compare to industry average? ▼
Cleburne Metal Works, LLC.'s total OSHA penalty of $5,428 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Intelligencer Printing Company in Lancaster, PA is a similar manufacturing employer with $5,430 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.