Construction · ST Paul, MN

Classic Protective Coatings INC

According to OSHA enforcement records (2010–2026), Classic Protective Coatings INC has a relatively clean safety record: 0 violations across 2 inspections. See the full breakdown below.

$0
OSHA penalties
0
Violations cited
2
OSHA inspections

Classic Protective Coatings INC in ST Paul, MN has been the subject of 2 OSHA workplace inspections and 0 citations since 2010, according to enforcement records from the U.S. Department of Labor. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Classic Protective Coatings INC 2 times over 1 year - more than twice a year on average. None of these inspections resulted in a citation. Against the Construction industry average of 2 inspections per employer, this sits roughly in line with peers (1.0x the sector average) on inspection frequency. For comparison, C. Abbonizio Contractors in Chester, PA is another construction employer with 2 OSHA inspections on record and $0 in current penalties.

0.0
violations per inspection
0.0%
of violations were serious

Compliance score

A 90/100
  • A OSHA safety compliance: 0 violations across 2 OSHA inspections (0.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Construction employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Classic Protective Coatings INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.002.95.88.711.6OSHA inspectionsViolations citedJFP CONSTRUCTION, LLC., OSHA inspections: 2 · Violations cited: 11THOUTT BROS. CONCRET…, OSHA inspections: 2 · Violations cited: 9PARAGON FRAMING INC, OSHA inspections: 2 · Violations cited: 4LONNIE RICE CONSTRUC…, OSHA inspections: 2 · Violations cited: 7AUCHLY ROOFING, INC., OSHA inspections: 2 · Violations cited: 5BOUWKAMP MASONRY, INC., OSHA inspections: 2 · Violations cited: 7LEMELIN CONTRACTING …, OSHA inspections: 2 · Violations cited: 7EMZ CONSTRUCTION, INC., OSHA inspections: 2 · Violations cited: 5ROGELIO MORENO, OSHA inspections: 2 · Violations cited: 2DAN MILLS CONSTRUCTI…, OSHA inspections: 2 · Violations cited: 2PEORIA SIDING AND WI…, OSHA inspections: 2 · Violations cited: 6DHE PLUMBING & MECHA…, OSHA inspections: 2 · Violations cited: 2FLORENTINO VELASCO, OSHA inspections: 2 · Violations cited: 5AGUILAR FRAMING, LLC, OSHA inspections: 2 · Violations cited: 8JJ STONE EXTERIORS I…, OSHA inspections: 2 · Violations cited: 5RELMCO, INC., OSHA inspections: 2 · Violations cited: 7JOSE ELMER ZORIANO M…, OSHA inspections: 2 · Violations cited: 5RAFF CUSTOM HOMES, I…, OSHA inspections: 2 · Violations cited: 6TIMELINE SERVICES LLC, OSHA inspections: 2 · Violations cited: 4ANTHONY PARIS, OSHA inspections: 2 · Violations cited: 7Classic Protective C…, OSHA inspections: 2 · Violations cited: 0
Classic Protective Coatings INC has 2 OSHA inspections on record and 0 violations cited. The crosshair marks the median among these Construction peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

How Classic Protective Coatings INC Compares

2 OSHA inspections on record for Classic Protective Coatings INC in ST Paul, MN, zero violations cited, a cleaner record than the Construction sector average of 3.3 violations per employer.

No OSHA penalty has been assessed against Classic Protective Coatings INC to date. The Construction sector average runs $6,767 per employer.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2013-09-13

Last Inspection

2013-09-13

Inspection Span

1 yr

Violations / Inspection

0.0

Avg Penalty / Inspection

$0

Industry Avg / Inspection

$3,361

What this shows 2 inspections over 1 year, averaging 0.0 violations per visit. That's $0 per inspection vs. the Construction average of $3,361.

Industry Safety Context: Construction

How Classic Protective Coatings INC compares to the Construction sector, which has 61,260 employers tracked by PlainWorker.

Metric Classic Protective Coatings INC Industry Avg
Inspections 2 2.0
Violations 0 3.3
Total Penalty $0 $6,767
Avg Penalty per Inspection $0 $3,361

Nationwide Construction peers with similar penalties or inspection counts

Two OSHA-record peer sets for Classic Protective Coatings INC, both outside MN so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Construction

Showing 5 of 61259 other employers tracked in this sector.

Compare Classic Protective Coatings INC vs Nielsen Builders INC side-by-side →

What to do with this record

Use Classic Protective Coatings INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Classic Protective Coatings INC against Nielsen Builders INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Classic Protective Coatings INC's inspection and penalty record is typical for Construction or an outlier against the sector's own average. View the Construction sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Classic Protective Coatings INC safe to work at?
Based on OSHA records, Classic Protective Coatings INC's workplace safety record is relatively clean, with fewer violations than typical. The employer has 0 violations across 2 inspections. Compared to Construction industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Classic Protective Coatings INC have?
Classic Protective Coatings INC has 0 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $0.
How many OSHA inspections has Classic Protective Coatings INC had?
Classic Protective Coatings INC has had 2 OSHA inspections, with the first recorded on 2013-09-13 and the most recent on 2013-09-13. This averages 0.0 violations per inspection.
What is the total penalty amount for Classic Protective Coatings INC?
Classic Protective Coatings INC has been assessed $0 in current OSHA penalties.
What industry does Classic Protective Coatings INC operate in?
Classic Protective Coatings INC operates in the Construction sector (NAICS code 237110). This industry has 61,260 employers tracked by PlainWorker, with 123,354 total OSHA inspections and $414.57M in cumulative penalties.
How does Classic Protective Coatings INC's safety record compare to industry average?
Classic Protective Coatings INC's total OSHA penalty of $0 is below the Construction industry average of $6,767 per employer. The employer has 2 inspections compared to the industry average of 2.0 per employer. For a direct comparison, C. Abbonizio Contractors in Chester, PA is a similar construction employer with $0 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.