Manufacturing · Prairieville, LA

Capitol Concrete Products

According to OSHA enforcement records (2010–2026), Capitol Concrete Products ranks #19,595 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 26 violations across 4 inspections.

Top 25% by penalty62% serious
$18,113
OSHA penalties
26
Violations cited
4
OSHA inspections
#19,595
of 99,447 penalized employers

Capitol Concrete Products in Prairieville, LA has been the subject of 4 OSHA workplace inspections and 26 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $18,113. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Capitol Concrete Products 4 times over 5 years, roughly once every couple of years. These inspections resulted in 26 violations, averaging 6.5 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #19,595 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 16 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Johns Manville in Macon, GA is another manufacturing employer with 2 OSHA inspections on record and $18,117 in current penalties.

6.5
violations per inspection
61.5%
of violations were serious
#19,595
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 26 violations across 4 OSHA inspections (6.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Capitol Concrete Products compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Capitol Concrete Products sits roughly in line with peers (1.1x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$18,113 Bottom 20% least affordable more affordable than 20% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Capitol Concrete Products.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.02.914.52637.649.1OSHA inspectionsViolations citedDAEIL USA CORPORATION, OSHA inspections: 4 · Violations cited: 23ACCREDO PACKAGING, I…, OSHA inspections: 4 · Violations cited: 7AGROPUR INC., OSHA inspections: 4 · Violations cited: 12KLOCKNER PENTAPLAST …, OSHA inspections: 4 · Violations cited: 8CONAGRA BRANDS, INC., OSHA inspections: 4 · Violations cited: 10AQUA MARINE ENTERPRI…, OSHA inspections: 4 · Violations cited: 9CORN MAIDEN FOODS INC., OSHA inspections: 4 · Violations cited: 22D & H INDUSTRIES, INC., OSHA inspections: 4 · Violations cited: 18CP INDUSTRIES, OSHA inspections: 4 · Violations cited: 12MUELLER IMPACTS CO INC, OSHA inspections: 4 · Violations cited: 25SPECTRUM CONCRETE PR…, OSHA inspections: 4 · Violations cited: 13CEMLINE CORPORATION, OSHA inspections: 4 · Violations cited: 29CRESCENT METAL PRODU…, OSHA inspections: 4 · Violations cited: 10BEHNKE ENTERPRISES, …, OSHA inspections: 4 · Violations cited: 8REDALL INDUSTRIES INC, OSHA inspections: 4 · Violations cited: 15SPACESAVER CORPORATION, OSHA inspections: 4 · Violations cited: 7CHEMICAL PROCESS IND…, OSHA inspections: 4 · Violations cited: 47U.S. COTTON, LLC, OSHA inspections: 4 · Violations cited: 5BISON BAG CO., INC., OSHA inspections: 4 · Violations cited: 10PRODUCTION SAW & MAC…, OSHA inspections: 4 · Violations cited: 11Capitol Concrete Pro…, OSHA inspections: 4 · Violations cited: 26
Capitol Concrete Products has 4 OSHA inspections on record and 26 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Capitol Concrete Products in the Manufacturing enforcement ledger

In Manufacturing, Capitol Concrete Products sits at penalty rank #9,392 of 35,243 penalized establishments ($18,113 assessed).

How Capitol Concrete Products Compares

Capitol Concrete Products's 6.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.1x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2015-06-17

Last Inspection

2020-11-17

Inspection Span

5 yrs

Violations / Inspection

6.5

Avg Penalty / Inspection

$4,528

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 5 years, averaging 6.5 violations per visit. That's $4,528 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

16

Serious

61.5% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

10

Other-Than-Serious

38.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$42,203

Current Penalty Amount

$18,113

Penalty Reduction

57.1%

What this shows Penalties were reduced by $24,090 from the initial assessment of $42,203. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Capitol Concrete Products compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Capitol Concrete Products Industry Avg
Inspections 4 2.6
Violations 26 8.0
Total Penalty $18,113 $15,763
Avg Penalty per Inspection $4,528 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Capitol Concrete Products, both outside LA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($18,113 here).

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Capitol Concrete Products vs Plastipak Packaging INC side-by-side →

What to do with this record

Use Capitol Concrete Products's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Capitol Concrete Products against Plastipak Packaging INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Capitol Concrete Products's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Capitol Concrete Products safe to work at?
Based on OSHA records, Capitol Concrete Products's workplace safety record is concerning, with multiple serious compliance issues. The employer has 26 violations across 4 inspections, including 16 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Capitol Concrete Products have?
Capitol Concrete Products has 26 OSHA violations on record, including 16 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $18,113.
How many OSHA inspections has Capitol Concrete Products had?
Capitol Concrete Products has had 4 OSHA inspections, with the first recorded on 2015-06-17 and the most recent on 2020-11-17. This averages 6.5 violations per inspection.
What is the total penalty amount for Capitol Concrete Products?
Capitol Concrete Products has been assessed $18,113 in current OSHA penalties, reduced from an initial assessment of $42,203 (a 57.1% reduction).
Does Capitol Concrete Products have any serious or willful violations?
Yes. Capitol Concrete Products has 16 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Capitol Concrete Products operate in?
Capitol Concrete Products operates in the Manufacturing sector (NAICS code 327332). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Capitol Concrete Products rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Capitol Concrete Products ranks #19,595 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Capitol Concrete Products's safety record compare to industry average?
Capitol Concrete Products's total OSHA penalty of $18,113 is above the Manufacturing industry average of $15,763 per employer (1.1x the average). The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Johns Manville in Macon, GA is a similar manufacturing employer with $18,117 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.