PlainWorker
Employers › TX

Manufacturing · Lewisville, TX

Campbell Grinding & Machine, INC.

According to OSHA enforcement records (2010–2026), Campbell Grinding & Machine, INC. ranks #86,851 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 1 violations across 2 inspections.

Lower half by penalty100% serious
$998
OSHA penalties
1
Violations cited
2
OSHA inspections
#86,851
of 99,447 penalized employers

Campbell Grinding & Machine, INC. in Lewisville, TX has been the subject of 2 OSHA workplace inspections and 1 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $998. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Campbell Grinding & Machine, INC. 2 times across a longer 6-year span, an infrequent cadence. These inspections resulted in 1 violation, averaging 0.5 per inspection, on the lighter side. According to OSHA enforcement records, its total current penalty ranks #86,851 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, River Street Metal Finishing, INC. in Braintree, MA is another manufacturing employer with 2 OSHA inspections on record and $1,000 in current penalties.

0.5
violations per inspection
100.0%
of violations were serious
#86,851
of 99,447 penalized employers

Compliance score

B 83/100
  • B OSHA safety compliance: 1 violation across 2 OSHA inspections (0.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Campbell Grinding & Machine, INC. runs well below peers (0.06x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$998 Top 13% most affordable more affordable than 87% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Campbell Grinding & Machine, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.008.416.825.233.5OSHA inspectionsViolations citedRED HEN BREAD LLC, OSHA inspections: 2 · Violations cited: 11GT TECHNOLOGIES, OSHA inspections: 2 · Violations cited: 6CLEVELAND STEEL CONT…, OSHA inspections: 2 · Violations cited: 8AVEKA NUTRA PROCESSING, OSHA inspections: 2 · Violations cited: 9A&E CLEANING AND GRI…, OSHA inspections: 2 · Violations cited: 21CYTEC INDUSTRIES, INC., OSHA inspections: 2 · Violations cited: 32PEPSI BEVERAGES COM…, OSHA inspections: 2 · Violations cited: 8NUTRIEN AG SOLUTIONS, OSHA inspections: 2 · Violations cited: 3TARAZI SPECIALTY FOO…, OSHA inspections: 2 · Violations cited: 5BRADY ENTERPRISES, I…, OSHA inspections: 2 · Violations cited: 6OLM FOOD SOLUTIONS (…, OSHA inspections: 2 · Violations cited: 4SUNSHINE MINTING NEV…, OSHA inspections: 2 · Violations cited: 2METROCK STEEL & WIRE…, OSHA inspections: 2 · Violations cited: 16PIKE FEEDS, INC, OSHA inspections: 2 · Violations cited: 15ROGER WOOD FOODS, OSHA inspections: 2 · Violations cited: 20MAPLE ISLAND, INC., OSHA inspections: 2 · Violations cited: 29AUTOLIV ASP, INC.-PRO, OSHA inspections: 2 · Violations cited: 5BYRNES & KIEFER COMP…, OSHA inspections: 2 · Violations cited: 4MASTERBLEND INTERNAT…, OSHA inspections: 2 · Violations cited: 11FASTFORMING.COM, LLC, OSHA inspections: 2 · Violations cited: 18Campbell Grinding & …, OSHA inspections: 2 · Violations cited: 1
Campbell Grinding & Machine, INC. has 2 OSHA inspections on record and 1 violation cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Campbell Grinding & Machine, INC. in the Manufacturing enforcement ledger

In Manufacturing, Campbell Grinding & Machine, INC. sits at penalty rank #32,445 of 35,243 penalized establishments ($998 assessed).

How Campbell Grinding & Machine, INC. Compares

Campbell Grinding & Machine, INC.'s 0.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.06x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2012-02-07

Last Inspection

2018-02-22

Inspection Span

6 yrs

Violations / Inspection

0.5

Avg Penalty / Inspection

$499

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 6 years, averaging 0.5 violations per visit. That's $499 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

1

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$1,663

Current Penalty Amount

$998

Penalty Reduction

40.0%

What this shows Penalties were reduced by $665 from the initial assessment of $1,663. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Campbell Grinding & Machine, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Campbell Grinding & Machine, INC. Industry Avg
Inspections 2 2.6
Violations 1 8.0
Total Penalty $998 $15,763
Avg Penalty per Inspection $499 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Campbell Grinding & Machine, INC., both outside TX so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($998 here).

Dowty's Machine Works, INC. $998 LA Duluth Sheet Metal & Roofing Company $998 MN Gartner Refrigeration and Manufacturing, INC $999 MA Monroe Oak INC $1,000 OR

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Red Hen Bread LLC 2 insp. Elmhurst, IL GT Technologies 2 insp. Toledo, OH Cleveland Steel Container Corporation 2 insp. Streetsboro, OH Aveka Nutra Processing 2 insp. Waukon, IA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Dowty's Machine Works, INC.
Baton Rouge, LA
4 inspections $998
Duluth Sheet Metal & Roofing Company
Duluth, MN
3 inspections $998
Gartner Refrigeration and Manufacturing, INC
West Springfield, MA
2 inspections $999
River Street Metal Finishing, INC.
Braintree, MA
2 inspections $1,000
Caterpillar, INC.
Decatur, IL
6 inspections $1,000

Compare Campbell Grinding & Machine, INC. vs Dowty's Machine Works, INC. side-by-side →

What to do with this record

Use Campbell Grinding & Machine, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Campbell Grinding & Machine, INC. against Dowty's Machine Works, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Campbell Grinding & Machine, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Campbell Grinding & Machine, INC. safe to work at? ▼
Based on OSHA records, Campbell Grinding & Machine, INC.'s workplace safety record is relatively clean, with fewer violations than typical. The employer has 1 violations across 2 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Campbell Grinding & Machine, INC. have? ▼
Campbell Grinding & Machine, INC. has 1 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $998.
How many OSHA inspections has Campbell Grinding & Machine, INC. had? ▼
Campbell Grinding & Machine, INC. has had 2 OSHA inspections, with the first recorded on 2012-02-07 and the most recent on 2018-02-22. This averages 0.5 violations per inspection.
What is the total penalty amount for Campbell Grinding & Machine, INC.? ▼
Campbell Grinding & Machine, INC. has been assessed $998 in current OSHA penalties, reduced from an initial assessment of $1,663 (a 40.0% reduction).
Does Campbell Grinding & Machine, INC. have any serious or willful violations? ▼
Yes. Campbell Grinding & Machine, INC. has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Campbell Grinding & Machine, INC. operate in? ▼
Campbell Grinding & Machine, INC. operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Campbell Grinding & Machine, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Campbell Grinding & Machine, INC. ranks #86,851 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Campbell Grinding & Machine, INC.'s safety record compare to industry average? ▼
Campbell Grinding & Machine, INC.'s total OSHA penalty of $998 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, River Street Metal Finishing, INC. in Braintree, MA is a similar manufacturing employer with $1,000 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.