Construction · Houston, TX

Camarata Masonry Systems, LTD.

According to OSHA enforcement records (2010–2026), Camarata Masonry Systems, LTD. has a relatively clean safety record: 1 violations across 4 inspections. See the full breakdown below.

100% serious
$0
OSHA penalties
1
Violations cited
4
OSHA inspections

Camarata Masonry Systems, LTD. in Houston, TX has been the subject of 4 OSHA workplace inspections and 1 citations since 2010, according to enforcement records from the U.S. Department of Labor. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Camarata Masonry Systems, LTD. 4 times over 3 years, roughly annually. These inspections resulted in just 1 violation, averaging 0.3 per inspection - fewer than typical. Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Construction industry average of 2 inspections per employer, this runs moderately above peers (2.0x the sector average) on inspection frequency. For comparison, C. Abbonizio Contractors in Chester, PA is another construction employer with 2 OSHA inspections on record and $0 in current penalties.

0.3
violations per inspection
100.0%
of violations were serious

Compliance score

B 86/100
  • B OSHA safety compliance: 1 violation across 4 OSHA inspections (0.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Construction employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Camarata Masonry Systems, LTD..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.004.58.913.417.9OSHA inspectionsViolations citedHAITIAN CONSTRUCTION GROUP (CNMI) CORPORATION, OSHA inspections: 4 · Violations cited: 12KEVIN HOPPE CONSTRUCTION, INC., OSHA inspections: 4 · Violations cited: 5CORE TECH INTERNATIONAL CORPORATION, OSHA inspections: 4 · Violations cited: 4POLO MASONRY, INC., OSHA inspections: 4 · Violations cited: 7T & T CONSTRUCTION ENTERPRISES, LLC, OSHA inspections: 4 · Violations cited: 6BROOKLINE BUILDERS LLC, OSHA inspections: 4 · Violations cited: 4SALENBIEN TRUCKING AND EXCAVATING, INC., OSHA inspections: 4 · Violations cited: 6RITSEMA ASSOCIATES, OSHA inspections: 4 · Violations cited: 3LMBI, INC., OSHA inspections: 4 · Violations cited: 5MOSITES CONSTRUCTION COMPANY, OSHA inspections: 4 · Violations cited: 3GLACIER ENVIRONMENTAL SERVICES, OSHA inspections: 4 · Violations cited: 1SIWEK CONSTRUCTION, OSHA inspections: 4 · Violations cited: 4DAMITIO CONSTRUCTION, INC., OSHA inspections: 4 · Violations cited: 1BARTON MALOW COMPANY, OSHA inspections: 4 · Violations cited: 0CHAMPLAIN VILL DPW, OSHA inspections: 4 · Violations cited: 17OPECHEE CONSTRUCTION CORPORATION, OSHA inspections: 4 · Violations cited: 0PIEDMONT PLASTER & DRYWALL, OSHA inspections: 4 · Violations cited: 0SEABURG CONSTRUCTION CORP, OSHA inspections: 4 · Violations cited: 0BRANCH AND ASSOCIATES, OSHA inspections: 4 · Violations cited: 0SKANSKA USA BUILDING INC, OSHA inspections: 4 · Violations cited: 3Camarata Masonry Systems, LTD., OSHA inspections: 4 · Violations cited: 1
Camarata Masonry Systems, LTD. has 4 OSHA inspections on record and 1 violation cited. The crosshair marks the median among these Construction peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

How Camarata Masonry Systems, LTD. Compares

Camarata Masonry Systems, LTD.'s 0.25 violations per inspection compares to the Construction sector average of 3.3 violations per employer.

No OSHA penalty has been assessed against Camarata Masonry Systems, LTD. to date. The Construction sector average runs $6,767 per employer.

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2015-07-29

Last Inspection

2018-08-16

Inspection Span

3 yrs

Violations / Inspection

0.3

Avg Penalty / Inspection

$0

Industry Avg / Inspection

$3,361

What this shows 4 inspections over 3 years, averaging 0.3 violations per visit. That's $0 per inspection vs. the Construction average of $3,361.

Enforcement detail

Violation Breakdown

1

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Industry Safety Context: Construction

How Camarata Masonry Systems, LTD. compares to the Construction sector, which has 61,260 employers tracked by PlainWorker.

Metric Camarata Masonry Systems, LTD. Industry Avg
Inspections 4 2.0
Violations 1 3.3
Total Penalty $0 $6,767
Avg Penalty per Inspection $0 $3,361

Nationwide Construction peers with similar penalties or inspection counts

Two OSHA-record peer sets for Camarata Masonry Systems, LTD., both outside TX so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Construction

Showing 5 of 61259 other employers tracked in this sector.

Compare Camarata Masonry Systems, LTD. vs Nielsen Builders INC side-by-side →

What to do with this record

Use Camarata Masonry Systems, LTD.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Camarata Masonry Systems, LTD. against Nielsen Builders INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Camarata Masonry Systems, LTD.'s inspection and penalty record is typical for Construction or an outlier against the sector's own average. View the Construction sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Camarata Masonry Systems, LTD. safe to work at? ▼
Based on OSHA records, Camarata Masonry Systems, LTD.'s workplace safety record is relatively clean, with fewer violations than typical. The employer has 1 violations across 4 inspections, including 1 serious violations. Compared to Construction industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Camarata Masonry Systems, LTD. have? ▼
Camarata Masonry Systems, LTD. has 1 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $0.
How many OSHA inspections has Camarata Masonry Systems, LTD. had? ▼
Camarata Masonry Systems, LTD. has had 4 OSHA inspections, with the first recorded on 2015-07-29 and the most recent on 2018-08-16. This averages 0.3 violations per inspection.
What is the total penalty amount for Camarata Masonry Systems, LTD.? ▼
Camarata Masonry Systems, LTD. has been assessed $0 in current OSHA penalties, reduced from an initial assessment of $1,600 (a 100.0% reduction).
Does Camarata Masonry Systems, LTD. have any serious or willful violations? ▼
Yes. Camarata Masonry Systems, LTD. has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Camarata Masonry Systems, LTD. operate in? ▼
Camarata Masonry Systems, LTD. operates in the Construction sector (NAICS code 238140). This industry has 61,260 employers tracked by PlainWorker, with 123,354 total OSHA inspections and $414.57M in cumulative penalties.
How does Camarata Masonry Systems, LTD.'s safety record compare to industry average? ▼
Camarata Masonry Systems, LTD.'s total OSHA penalty of $0 is below the Construction industry average of $6,767 per employer. The employer has 4 inspections compared to the industry average of 2.0 per employer. For a direct comparison, C. Abbonizio Contractors in Chester, PA is a similar construction employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.