PlainWorker
Employers › IN

Manufacturing · Attica, IN

C & D Technologies

According to OSHA enforcement records (2010–2026), C & D Technologies ranks #22,261 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 17 violations across 3 inspections.

Top 25% by penalty100% serious
$16,121
OSHA penalties
17
Violations cited
3
OSHA inspections
#22,261
of 99,447 penalized employers

C & D Technologies in Attica, IN has been the subject of 3 OSHA workplace inspections and 17 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $16,121. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected C & D Technologies 3 times over 3 years, roughly annually. These inspections resulted in 17 violations, averaging 5.7 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #22,261 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 17 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Utility Trailer Manufacturing Company in Glade Spring, VA is another manufacturing employer with 4 OSHA inspections on record and $16,120 in current penalties.

5.7
violations per inspection
100.0%
of violations were serious
#22,261
of 99,447 penalized employers

Compliance score

F 8/100
  • F OSHA safety compliance: 17 violations across 3 OSHA inspections (5.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How C & D Technologies compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows C & D Technologies sits roughly in line with peers (1.0x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$16,121 Bottom 22% least affordable more affordable than 22% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is C & D Technologies.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.02.112.322.532.742.9OSHA inspectionsViolations citedSTONE ETC INC, OSHA inspections: 3 · Violations cited: 18FLEXIBLE METAL, INC., OSHA inspections: 3 · Violations cited: 6COHERENT, INC., OSHA inspections: 3 · Violations cited: 16WILSON LUMBER CO., I…, OSHA inspections: 3 · Violations cited: 12SIPI METALS CORP., OSHA inspections: 3 · Violations cited: 14NORMAN W. PASCHALL C…, OSHA inspections: 3 · Violations cited: 17K.B.P. COIL COATERS,…, OSHA inspections: 3 · Violations cited: 7HALLAMORE CORP., OSHA inspections: 3 · Violations cited: 9IMAGINE SCREEN PRINT…, OSHA inspections: 3 · Violations cited: 17PALLET COMPANIES, INC., OSHA inspections: 3 · Violations cited: 4YORK BUILDING PRODUC…, OSHA inspections: 3 · Violations cited: 41TREEHOUSE PRIVATE BR…, OSHA inspections: 3 · Violations cited: 4SAWMILLER LLC, OSHA inspections: 3 · Violations cited: 6T&L AUTOMATICS, INC., OSHA inspections: 3 · Violations cited: 4BERGEURO CORPORATION, OSHA inspections: 3 · Violations cited: 6BAYOU BOARDS AND RIG…, OSHA inspections: 3 · Violations cited: 21PINNACLE FOODS GROUP…, OSHA inspections: 3 · Violations cited: 16TABER COMPANY INC, OSHA inspections: 3 · Violations cited: 9AMERICAN RICE, INC., OSHA inspections: 3 · Violations cited: 9P & THE MANUFACTURIN…, OSHA inspections: 3 · Violations cited: 16C & D Technologies, OSHA inspections: 3 · Violations cited: 17
C & D Technologies has 3 OSHA inspections on record and 17 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

C & D Technologies in the Manufacturing enforcement ledger

Manufacturing sector: C & D Technologies is the #10,599 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($16,121).

How C & D Technologies Compares

C & D Technologies's 5.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.0x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2010-04-05

Last Inspection

2013-02-15

Inspection Span

3 yrs

Violations / Inspection

5.7

Avg Penalty / Inspection

$5,374

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 3 years, averaging 5.7 violations per visit. That's $5,374 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

17

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$24,800

Current Penalty Amount

$16,121

Penalty Reduction

35.0%

What this shows Penalties were reduced by $8,679 from the initial assessment of $24,800. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How C & D Technologies compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric C & D Technologies Industry Avg
Inspections 3 2.6
Violations 17 8.0
Total Penalty $16,121 $15,763
Avg Penalty per Inspection $5,374 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for C & D Technologies, both outside IN so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($16,121 here).

Utility Trailer Manufacturing Company $16,120 VA Saputo Dairy Foods USA, LLC $16,120 CT Rusken Packaging, INC. $16,123 AL Pearl Technologies, INC. $16,118 NY

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Stone Etc INC 3 insp. Gardena, CA Flexible Metal, INC. 3 insp. Tucker, GA Coherent, INC. 3 insp. Bloomfield, CT Wilson Lumber CO., INC. 3 insp. Madison, AL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Utility Trailer Manufacturing Company
Glade Spring, VA
4 inspections $16,120
Saputo Dairy Foods USA, LLC
Newington, CT
3 inspections $16,120
Rusken Packaging, INC.
Cullman, AL
4 inspections $16,123
Pearl Technologies, INC.
Savannah, NY
8 inspections $16,118
JNB Machine Shop, INC
Houston, TX
2 inspections $16,124

Compare C & D Technologies vs Utility Trailer Manufacturing Company side-by-side →

What to do with this record

Use C & D Technologies's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare C & D Technologies against Utility Trailer Manufacturing Company, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether C & D Technologies's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is C & D Technologies safe to work at? ▼
Based on OSHA records, C & D Technologies's workplace safety record is concerning, with multiple serious compliance issues. The employer has 17 violations across 3 inspections, including 17 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does C & D Technologies have? ▼
C & D Technologies has 17 OSHA violations on record, including 17 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $16,121.
How many OSHA inspections has C & D Technologies had? ▼
C & D Technologies has had 3 OSHA inspections, with the first recorded on 2010-04-05 and the most recent on 2013-02-15. This averages 5.7 violations per inspection.
What is the total penalty amount for C & D Technologies? ▼
C & D Technologies has been assessed $16,121 in current OSHA penalties, reduced from an initial assessment of $24,800 (a 35.0% reduction).
Does C & D Technologies have any serious or willful violations? ▼
Yes. C & D Technologies has 17 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does C & D Technologies operate in? ▼
C & D Technologies operates in the Manufacturing sector (NAICS code 335911). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does C & D Technologies rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, C & D Technologies ranks #22,261 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does C & D Technologies's safety record compare to industry average? ▼
C & D Technologies's total OSHA penalty of $16,121 is above the Manufacturing industry average of $15,763 per employer (1.0x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Utility Trailer Manufacturing Company in Glade Spring, VA is a similar manufacturing employer with $16,120 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.