PlainWorker
Employers › MI

Manufacturing · Portage, MI

Bunting Bearings LLC

According to OSHA enforcement records (2010–2026), Bunting Bearings LLC has a mixed safety record: 19 violations across 7 inspections. See the full breakdown below.

Upper half by penalty37% serious
$7,350
OSHA penalties
19
Violations cited
7
OSHA inspections
#44,457
of 100,495 penalized employers

Bunting Bearings LLC in Portage, MI has been the subject of 7 OSHA workplace inspections and 19 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $7,350. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Bunting Bearings LLC 7 times over 13 years, roughly once every couple of years. These inspections resulted in 19 violations, averaging 2.7 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the upper half of penalized employers nationally. Of these, 7 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs well above peers (2.8x the sector average) on inspection frequency. For comparison, Nu-Cast INC in Londonderry, NH is another manufacturing employer with 2 OSHA inspections on record and $7,350 in current penalties.

2.7
violations per inspection
36.8%
of violations were serious
56%
of penalized employers rank lower

How Bunting Bearings LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Bunting Bearings LLC runs moderately below peers (0.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$7,350 Bottom 44% least affordable more affordable than 44% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). This entry sits in this band. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Bunting Bearings LLC

The federal enforcement record for Bunting Bearings LLC in Portage, MI includes 7 OSHA inspections and 19 violations, translating to 2.71 violations per inspection. Of those violations, 7 (36.8%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $14,850 in initial penalties against this employer, later adjusted to a current total of $7,350 - a 50.5% reduction. Average penalty per inspection works out to $1,050. Against the Manufacturing industry average of $15,410 per employer, this record runs moderately below peers (0.5x the sector average).

Inspection activity spans from 2011-02-10 to 2023-11-15, a window of roughly 13 years.

Enforcement detail

OSHA Inspection History

Total Inspections

7

First Inspection

2011-02-10

Last Inspection

2023-11-15

Inspection Span

13 yrs

Violations / Inspection

2.7

Avg Penalty / Inspection

$1,050

Industry Avg / Inspection

$6,092

What this shows 7 inspections over 13 years, averaging 2.7 violations per visit. That's $1,050 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

7

Serious

36.8% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

12

Other-Than-Serious

63.2% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$14,850

Current Penalty Amount

$7,350

Penalty Reduction

50.5%

What this shows Penalties were reduced by $7,500 from the initial assessment of $14,850. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Bunting Bearings LLC compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Bunting Bearings LLC Industry Avg
Inspections 7 2.5
Violations 19 7.8
Total Penalty $7,350 $15,410
Avg Penalty per Inspection $1,050 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Jay Strongwater, LLC
Union Springs, NY
2 inspections $7,350
Industrial Steel Fabricators INC.
Hazelwood, MO
2 inspections $7,350
Hausner Hard Chrome of Kentucky INC
Owensboro, KY
2 inspections $7,350
Nu-Cast INC
Londonderry, NH
2 inspections $7,350
Video Services Group, INC
Saint Louis, MO
2 inspections $7,350

Compare Bunting Bearings LLC vs Jay Strongwater, LLC side-by-side →

Frequently Asked Questions

Is Bunting Bearings LLC safe to work at? ▼
Based on OSHA records, Bunting Bearings LLC's workplace safety record is mixed, with some compliance concerns. The employer has 19 violations across 7 inspections, including 7 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Bunting Bearings LLC have? ▼
Bunting Bearings LLC has 19 OSHA violations on record, including 7 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $7,350.
How many OSHA inspections has Bunting Bearings LLC had? ▼
Bunting Bearings LLC has had 7 OSHA inspections, with the first recorded on 2011-02-10 and the most recent on 2023-11-15. This averages 2.7 violations per inspection.
What is the total penalty amount for Bunting Bearings LLC? ▼
Bunting Bearings LLC has been assessed $7,350 in current OSHA penalties, reduced from an initial assessment of $14,850 (a 50.5% reduction).
Does Bunting Bearings LLC have any serious or willful violations? ▼
Yes. Bunting Bearings LLC has 7 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Bunting Bearings LLC operate in? ▼
Bunting Bearings LLC operates in the Manufacturing sector (NAICS code 332117). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Bunting Bearings LLC's safety record compare to industry average? ▼
Bunting Bearings LLC's total OSHA penalty of $7,350 is below the Manufacturing industry average of $15,410 per employer. The employer has 7 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Nu-Cast INC in Londonderry, NH is a similar manufacturing employer with $7,350 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in MI

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Bunting Bearings LLC's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 7 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.