PlainWorker
Employers › CT

Manufacturing · Simsbury, CT

Bmi Cad Services, INC.

According to OSHA enforcement records (2010–2026), Bmi Cad Services, INC. ranks #23,170 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 20 violations across 2 inspections.

Top 25% by penalty60% serious
$15,580
OSHA penalties
20
Violations cited
2
OSHA inspections
#23,170
of 99,447 penalized employers

Bmi Cad Services, INC. in Simsbury, CT has been the subject of 2 OSHA workplace inspections and 20 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $15,580. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Bmi Cad Services, INC. 2 times over 4 years, roughly once every couple of years. These inspections turned up 20 violations, averaging 10.0 per inspection - an extremely dense concentration of citations. According to OSHA enforcement records, its total current penalty ranks #23,170 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 12 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, G & G Machine Technology in Sidney, OH is another manufacturing employer with 0 OSHA inspections on record and $0 in current penalties.

10.0
violations per inspection
60.0%
of violations were serious
#23,170
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 20 violations across 2 OSHA inspections (10.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Bmi Cad Services, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Bmi Cad Services, INC. sits roughly in line with peers (1.0x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$15,580 Bottom 23% least affordable more affordable than 23% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Bmi Cad Services, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.01.97.713.519.325.1OSHA inspectionsViolations citedBRIESS INDUSTRIES, I…, OSHA inspections: 2 · Violations cited: 23VALENTI'S BAKERY LLC, OSHA inspections: 2 · Violations cited: 12CHAMPION HOME BUILDE…, OSHA inspections: 2 · Violations cited: 14SOLARIS PAPER, INC., OSHA inspections: 2 · Violations cited: 6CAST-CRETE USA, LLC, OSHA inspections: 2 · Violations cited: 3SV LABS CORPORATION, OSHA inspections: 2 · Violations cited: 7PINNACLE FOODS GROUP…, OSHA inspections: 2 · Violations cited: 8WILBERT PLASTIC SERV…, OSHA inspections: 2 · Violations cited: 5R. TORRE & COMPANY, …, OSHA inspections: 2 · Violations cited: 4KEECO, LLC, OSHA inspections: 2 · Violations cited: 4RPS COMPOSITES ALABA…, OSHA inspections: 2 · Violations cited: 13ALL STEEL CONSTRUCTI…, OSHA inspections: 2 · Violations cited: 17INTERNATIONAL FIBER …, OSHA inspections: 2 · Violations cited: 3ROTO SOLUTIONS, OSHA inspections: 2 · Violations cited: 24SPECTRO COATING CORP., OSHA inspections: 2 · Violations cited: 10EYE-FI HOLDINGS LLC, OSHA inspections: 2 · Violations cited: 8BENNETT BUILDING SYS…, OSHA inspections: 2 · Violations cited: 9YASKAWA AMERICA, INC., OSHA inspections: 2 · Violations cited: 6GOODHART SONS, INCOR…, OSHA inspections: 2 · Violations cited: 7INTERNATIONAL PAPER CO, OSHA inspections: 2 · Violations cited: 5Bmi Cad Services, INC., OSHA inspections: 2 · Violations cited: 20
Bmi Cad Services, INC. has 2 OSHA inspections on record and 20 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Bmi Cad Services, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Bmi Cad Services, INC. is the #10,998 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($15,580).

How Bmi Cad Services, INC. Compares

Bmi Cad Services, INC.'s 10.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.0x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2011-05-02

Last Inspection

2015-07-08

Inspection Span

4 yrs

Violations / Inspection

10.0

Avg Penalty / Inspection

$7,790

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 4 years, averaging 10.0 violations per visit. That's $7,790 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

12

Serious

60.0% of total

0

Willful

0.0% of total

4

Repeat

20.0% of total

4

Other-Than-Serious

20.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$25,000

Current Penalty Amount

$15,580

Penalty Reduction

37.7%

What this shows Penalties were reduced by $9,420 from the initial assessment of $25,000. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Bmi Cad Services, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Bmi Cad Services, INC. Industry Avg
Inspections 2 2.6
Violations 20 8.0
Total Penalty $15,580 $15,763
Avg Penalty per Inspection $7,790 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Bmi Cad Services, INC., both outside CT so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($15,580 here).

Precision Wire Forms INC $15,580 MI Champion Home Builders, INC. $15,580 FL Dorzar Corporation $15,576 NJ Storflex Fixtures Corporation $15,575 NY

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Briess Industries, INC. 2 insp. Manitowoc, WI Valenti's Bakery LLC 2 insp. Paterson, NJ Champion Home Builders, INC. 2 insp. Athens, TX Solaris Paper, INC. 2 insp. Moreno Valley, CA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Precision Wire Forms INC
Three Rivers, MI
6 inspections $15,580
Champion Home Builders, INC.
Lake City, FL
6 inspections $15,580
G & G Machine Technology
Sidney, OH
0 inspections $0
Dorzar Corporation
Newark, NJ
2 inspections $15,576
BNS Fashion, Inc.
Los Angeles, CA
0 inspections $0

Compare Bmi Cad Services, INC. vs Precision Wire Forms INC side-by-side →

What to do with this record

Use Bmi Cad Services, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Bmi Cad Services, INC. against Precision Wire Forms INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Bmi Cad Services, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Bmi Cad Services, INC. safe to work at? ▼
Based on OSHA records, Bmi Cad Services, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 20 violations across 2 inspections, including 12 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Bmi Cad Services, INC. have? ▼
Bmi Cad Services, INC. has 20 OSHA violations on record, including 12 serious, 0 willful, and 4 repeat violations. The total current penalty amount is $15,580.
How many OSHA inspections has Bmi Cad Services, INC. had? ▼
Bmi Cad Services, INC. has had 2 OSHA inspections, with the first recorded on 2011-05-02 and the most recent on 2015-07-08. This averages 10.0 violations per inspection.
What is the total penalty amount for Bmi Cad Services, INC.? ▼
Bmi Cad Services, INC. has been assessed $15,580 in current OSHA penalties, reduced from an initial assessment of $25,000 (a 37.7% reduction).
Does Bmi Cad Services, INC. have any serious or willful violations? ▼
Yes. Bmi Cad Services, INC. has 12 serious violations, and 4 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Bmi Cad Services, INC. operate in? ▼
Bmi Cad Services, INC. operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Bmi Cad Services, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Bmi Cad Services, INC. ranks #23,170 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Bmi Cad Services, INC.'s safety record compare to industry average? ▼
Bmi Cad Services, INC.'s total OSHA penalty of $15,580 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, G & G Machine Technology in Sidney, OH is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.