Manufacturing · Dearborn, MI

Big 3 Precision INC

According to OSHA enforcement records (2010–2026), Big 3 Precision INC ranks #23,748 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 11 violations across 3 inspections.

Top 25% by penalty64% serious
$15,200
OSHA penalties
11
Violations cited
3
OSHA inspections
#23,748
of 99,447 penalized employers

Big 3 Precision INC in Dearborn, MI has been the subject of 3 OSHA workplace inspections and 11 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $15,200. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Big 3 Precision INC 3 times over 2 years, roughly annually. These inspections resulted in 11 violations, averaging 3.7 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #23,748 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 7 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Central Rock Corporation/Southwinds Express Construction, LLC/Scott Materials, INC. in Scott, LA is another manufacturing employer with 2 OSHA inspections on record and $15,200 in current penalties.

3.7
violations per inspection
63.6%
of violations were serious
#23,748
of 99,447 penalized employers

Compliance score

F 37/100
  • F OSHA safety compliance: 11 violations across 3 OSHA inspections (3.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Big 3 Precision INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Big 3 Precision INC sits roughly in line with peers (1.0x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$15,200 Bottom 24% least affordable more affordable than 24% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Big 3 Precision INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.01.310.720.029.438.7OSHA inspectionsViolations citedBIGTEX TRAILERS, OSHA inspections: 3 · Violations cited: 37DARLING INGREDIENTS …, OSHA inspections: 3 · Violations cited: 13C. E. SHEPHERD COMPA…, OSHA inspections: 3 · Violations cited: 16ALBAUGH LLC, OSHA inspections: 3 · Violations cited: 8EFFECTIVE PLAN, INC., OSHA inspections: 3 · Violations cited: 14GEIB REFINING CORPOR…, OSHA inspections: 3 · Violations cited: 37KELLY RYAN EQUIPMENT…, OSHA inspections: 3 · Violations cited: 21DOUGLAS DYNAMICS, INC., OSHA inspections: 3 · Violations cited: 14STAMPED FITTINGS, INC., OSHA inspections: 3 · Violations cited: 13STEVES AND SONS, INC., OSHA inspections: 3 · Violations cited: 6FOLIUM BIOSCIENCES, …, OSHA inspections: 3 · Violations cited: 12MOMENTUM MANUFACTURI…, OSHA inspections: 3 · Violations cited: 4AMEREQUIP CORPORATIO…, OSHA inspections: 3 · Violations cited: 8WOODLINE WORKS CORPO…, OSHA inspections: 3 · Violations cited: 17PACIFIC STATES INDUS…, OSHA inspections: 3 · Violations cited: 10INNER-TITE CORP., OSHA inspections: 3 · Violations cited: 6FABCO STEEL FABRICAT…, OSHA inspections: 3 · Violations cited: 9UNIVERSAL TEXTILE TE…, OSHA inspections: 3 · Violations cited: 5MEZA PALLETS INC, OSHA inspections: 3 · Violations cited: 26ROYAL CUP, INC., OSHA inspections: 3 · Violations cited: 3Big 3 Precision INC, OSHA inspections: 3 · Violations cited: 11
Big 3 Precision INC has 3 OSHA inspections on record and 11 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Big 3 Precision INC in the Manufacturing enforcement ledger

In Manufacturing, Big 3 Precision INC sits at penalty rank #11,243 of 35,243 penalized establishments ($15,200 assessed).

How Big 3 Precision INC Compares

Big 3 Precision INC's 3.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.0x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2018-06-15

Last Inspection

2020-09-02

Inspection Span

2 yrs

Violations / Inspection

3.7

Avg Penalty / Inspection

$5,067

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 2 years, averaging 3.7 violations per visit. That's $5,067 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

7

Serious

63.6% of total

0

Willful

0.0% of total

2

Repeat

18.2% of total

2

Other-Than-Serious

18.2% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$30,400

Current Penalty Amount

$15,200

Penalty Reduction

50.0%

What this shows Penalties were reduced by $15,200 from the initial assessment of $30,400. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Big 3 Precision INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Big 3 Precision INC Industry Avg
Inspections 3 2.6
Violations 11 8.0
Total Penalty $15,200 $15,763
Avg Penalty per Inspection $5,067 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Big 3 Precision INC, both outside MI so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Big 3 Precision INC vs C-Wood Lumber CO., INC. side-by-side →

What to do with this record

Use Big 3 Precision INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Big 3 Precision INC against C-Wood Lumber CO., INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Big 3 Precision INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Big 3 Precision INC safe to work at?
Based on OSHA records, Big 3 Precision INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 11 violations across 3 inspections, including 7 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Big 3 Precision INC have?
Big 3 Precision INC has 11 OSHA violations on record, including 7 serious, 0 willful, and 2 repeat violations. The total current penalty amount is $15,200.
How many OSHA inspections has Big 3 Precision INC had?
Big 3 Precision INC has had 3 OSHA inspections, with the first recorded on 2018-06-15 and the most recent on 2020-09-02. This averages 3.7 violations per inspection.
What is the total penalty amount for Big 3 Precision INC?
Big 3 Precision INC has been assessed $15,200 in current OSHA penalties, reduced from an initial assessment of $30,400 (a 50.0% reduction).
Does Big 3 Precision INC have any serious or willful violations?
Yes. Big 3 Precision INC has 7 serious violations, and 2 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Big 3 Precision INC operate in?
Big 3 Precision INC operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Big 3 Precision INC rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Big 3 Precision INC ranks #23,748 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Big 3 Precision INC's safety record compare to industry average?
Big 3 Precision INC's total OSHA penalty of $15,200 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Central Rock Corporation/Southwinds Express Construction, LLC/Scott Materials, INC. in Scott, LA is a similar manufacturing employer with $15,200 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.