PlainWorker
Employers › OR

Manufacturing · Bend, OR

Bend Machine INC

According to OSHA enforcement records (2010–2026), Bend Machine INC ranks #96,379 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 5 violations across 3 inspections.

Lower half by penalty40% serious
$265
OSHA penalties
5
Violations cited
3
OSHA inspections
#96,379
of 99,447 penalized employers

Bend Machine INC in Bend, OR has been the subject of 3 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $265. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Bend Machine INC 3 times over 2 years, roughly annually. These inspections resulted in 5 violations, averaging 1.7 per inspection. According to OSHA enforcement records, its total current penalty ranks #96,379 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Jays Custom Fabrication INC in Newberg, OR is another manufacturing employer with 2 OSHA inspections on record and $265 in current penalties.

1.7
violations per inspection
40.0%
of violations were serious
#96,379
of 99,447 penalized employers

Compliance score

C 66/100
  • C OSHA safety compliance: 5 violations across 3 OSHA inspections (1.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Bend Machine INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Bend Machine INC runs well below peers (0.02x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$265 Top 3% most affordable more affordable than 97% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Bend Machine INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.01.111.321.531.741.9OSHA inspectionsViolations citedAEROSPACE/DEFENSE CO…, OSHA inspections: 3 · Violations cited: 26ABC TECHNOLOGIES WMG…, OSHA inspections: 3 · Violations cited: 10WONDERFUL CITRUS PAC…, OSHA inspections: 3 · Violations cited: 7HERITAGE PLASTICS, I…, OSHA inspections: 3 · Violations cited: 6LIBERTY FORGE, INC., OSHA inspections: 3 · Violations cited: 13GORTON'S INC., OSHA inspections: 3 · Violations cited: 6TMG PERFORMANCE PROD…, OSHA inspections: 3 · Violations cited: 7F. D. S. MANUFACTURI…, OSHA inspections: 3 · Violations cited: 12CENTREX PLASTICS, LLC, OSHA inspections: 3 · Violations cited: 9BLACKBURN'S FABRICAT…, OSHA inspections: 3 · Violations cited: 13BOISE CASCADE COMPANY, OSHA inspections: 3 · Violations cited: 3RIVERSIDE FOODS, INC., OSHA inspections: 3 · Violations cited: 7CRYOPAK, INC., OSHA inspections: 3 · Violations cited: 4MARUICHI LEAVITT PIP…, OSHA inspections: 3 · Violations cited: 4HY-VEE FRESH COMMISS…, OSHA inspections: 3 · Violations cited: 6RANCH CREEK LTD, OSHA inspections: 3 · Violations cited: 31ISLAND STONE, INC., OSHA inspections: 3 · Violations cited: 31MID ATLANTIC METAL S…, OSHA inspections: 3 · Violations cited: 40WIL-RO, INC., OSHA inspections: 3 · Violations cited: 39PRINCE METAL STAMPIN…, OSHA inspections: 3 · Violations cited: 6Bend Machine INC, OSHA inspections: 3 · Violations cited: 5
Bend Machine INC has 3 OSHA inspections on record and 5 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Bend Machine INC in the Manufacturing enforcement ledger

In Manufacturing, Bend Machine INC sits at penalty rank #34,645 of 35,243 penalized establishments ($265 assessed).

How Bend Machine INC Compares

Bend Machine INC's 1.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.02x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2011-09-07

Last Inspection

2014-01-16

Inspection Span

2 yrs

Violations / Inspection

1.7

Avg Penalty / Inspection

$88

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 2 years, averaging 1.7 violations per visit. That's $88 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

40.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

60.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$265

Current Penalty Amount

$265

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Bend Machine INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Bend Machine INC Industry Avg
Inspections 3 2.6
Violations 5 8.0
Total Penalty $265 $15,763
Avg Penalty per Inspection $88 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Bend Machine INC, both outside OR so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($265 here).

Quality Monument Sales, INC. $266 GA Shield Pattern Works INC $263 MN Robin Machine INC $263 MN Central Iowa Machining CO. INC. $263 IA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Aerospace/Defense Coatings of Georgia 3 insp. Macon, GA Abc Technologies WMG USA, INC. 3 insp. Bellevue, OH Wonderful Citrus Packing LLC 3 insp. Mission, TX Heritage Plastics, INC. 3 insp. Picayune, MS

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Jays Custom Fabrication INC
Newberg, OR
2 inspections $265
CJW Pallets Incorporated
Central Point, OR
3 inspections $265
Obie Construction INC
Eugene, OR
3 inspections $265
CK & Company of Oregon INC
Salem, OR
2 inspections $265
Precision Drying Services INC
Molalla, OR
2 inspections $265

Compare Bend Machine INC vs Jays Custom Fabrication INC side-by-side →

What to do with this record

Use Bend Machine INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Bend Machine INC against Jays Custom Fabrication INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Bend Machine INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Bend Machine INC safe to work at? ▼
Based on OSHA records, Bend Machine INC's workplace safety record is mixed, with some compliance concerns. The employer has 5 violations across 3 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Bend Machine INC have? ▼
Bend Machine INC has 5 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $265.
How many OSHA inspections has Bend Machine INC had? ▼
Bend Machine INC has had 3 OSHA inspections, with the first recorded on 2011-09-07 and the most recent on 2014-01-16. This averages 1.7 violations per inspection.
What is the total penalty amount for Bend Machine INC? ▼
Bend Machine INC has been assessed $265 in current OSHA penalties.
Does Bend Machine INC have any serious or willful violations? ▼
Yes. Bend Machine INC has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Bend Machine INC operate in? ▼
Bend Machine INC operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Bend Machine INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Bend Machine INC ranks #96,379 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Bend Machine INC's safety record compare to industry average? ▼
Bend Machine INC's total OSHA penalty of $265 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Jays Custom Fabrication INC in Newberg, OR is a similar manufacturing employer with $265 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.