PlainWorker
Employers › FL

Manufacturing · Sanford, FL

Benada Aluminum Products, LLC

According to OSHA enforcement records (2010–2026), Benada Aluminum Products, LLC ranks #3,359 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 51 violations across 7 inspections.

Top 5% by penalty65% serious
$66,554
OSHA penalties
51
Violations cited
7
OSHA inspections
#3,359
of 99,447 penalized employers

Benada Aluminum Products, LLC in Sanford, FL has been the subject of 7 OSHA workplace inspections and 51 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $66,554. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Benada Aluminum Products, LLC 7 times over 7 years, roughly annually. These inspections resulted in 51 violations, averaging 7.3 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #3,359 of 99,447 penalized U.S. employers (the top 5% of penalized employers nationally). Of these, 33 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs well above peers (2.7x the sector average) on inspection frequency. For comparison, Twins Twins LLC in Labelle, FL is another manufacturing employer with 4 OSHA inspections on record and $66,550 in current penalties.

7.3
violations per inspection
64.7%
of violations were serious
#3,359
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 51 violations across 7 OSHA inspections (7.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Benada Aluminum Products, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Benada Aluminum Products, LLC runs well above peers (4.2x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$66,554 Bottom 3% least affordable more affordable than 3% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Below this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,150 U.S. employers with a penalty (5%). This entry ($66,554) is well above this band, the chart's rightmost open-ended bucket. This employer: $66,554 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Benada Aluminum Products, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both7.07.077.07.0018.637.255.874.5OSHA inspectionsViolations citedSTAR SNACKS CO., LLC, OSHA inspections: 7 · Violations cited: 17NORTEK POWDER COATIN…, OSHA inspections: 7 · Violations cited: 18TELFAIR FOREST PRODU…, OSHA inspections: 7 · Violations cited: 13CHEROKEE BRICK & TIL…, OSHA inspections: 7 · Violations cited: 9BIMBO BAKERIES, USA …, OSHA inspections: 7 · Violations cited: 2SEA WATCH INTERNATIO…, OSHA inspections: 7 · Violations cited: 17WEBSTER INDUSTRIES, …, OSHA inspections: 7 · Violations cited: 12COOK ENGINE INC., OSHA inspections: 7 · Violations cited: 23SENSUS USA INC., OSHA inspections: 7 · Violations cited: 6AMERICAN PHOENIX, INC., OSHA inspections: 7 · Violations cited: 29TECNOCAP, LLC, OSHA inspections: 7 · Violations cited: 24GESTAMP WIND TOWERS …, OSHA inspections: 7 · Violations cited: 17POLYCHEM SERVICES, I…, OSHA inspections: 7 · Violations cited: 50T. MARZETTI COMPANY, OSHA inspections: 7 · Violations cited: 20MBA BUILDING SUPPLIE…, OSHA inspections: 7 · Violations cited: 17CAMACO, LLC, OSHA inspections: 7 · Violations cited: 9SCICAST INTERNATIONA…, OSHA inspections: 7 · Violations cited: 13DONJON SHIPBUILDING …, OSHA inspections: 7 · Violations cited: 16MAHLE ENGINE COMPONE…, OSHA inspections: 7 · Violations cited: 47GREDE WISCONSIN SUBS…, OSHA inspections: 7 · Violations cited: 71Benada Aluminum Prod…, OSHA inspections: 7 · Violations cited: 51
Benada Aluminum Products, LLC has 7 OSHA inspections on record and 51 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Benada Aluminum Products, LLC in the Manufacturing enforcement ledger

Manufacturing sector: Benada Aluminum Products, LLC is the #1,733 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($66,554).

How Benada Aluminum Products, LLC Compares

Benada Aluminum Products, LLC's 7.29 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (4.2x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

7

First Inspection

2012-03-13

Last Inspection

2018-11-29

Inspection Span

7 yrs

Violations / Inspection

7.3

Avg Penalty / Inspection

$9,508

Industry Avg / Inspection

$6,093

What this shows 7 inspections over 7 years, averaging 7.3 violations per visit. That's $9,508 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

33

Serious

64.7% of total

0

Willful

0.0% of total

4

Repeat

7.8% of total

14

Other-Than-Serious

27.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$111,680

Current Penalty Amount

$66,554

Penalty Reduction

40.4%

What this shows Penalties were reduced by $45,126 from the initial assessment of $111,680. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Benada Aluminum Products, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Benada Aluminum Products, LLC Industry Avg
Inspections 7 2.6
Violations 51 8.0
Total Penalty $66,554 $15,763
Avg Penalty per Inspection $9,508 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Benada Aluminum Products, LLC, both outside FL so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($66,554 here).

Sterling Shipyard, LP $66,584 TX Moly Manufacturing INC $66,608 KS Coastal Precast Systems LLC $66,616 VA Loy-Lange Box Company $66,622 MO

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (7 inspections here).

Star Snacks CO., LLC 7 insp. Jersey City, NJ Nortek Powder Coating LLC 7 insp. Rome, NY Telfair Forest Products, LLC 7 insp. Lumber City, GA Cherokee Brick & Tile Company 7 insp. Macon, GA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

A.y. McDonald MFG. CO.
Dubuque, IA
8 inspections $66,240
Twins Twins LLC
Labelle, FL
4 inspections $66,550
Sterling Shipyard, LP
Port Neches, TX
4 inspections $66,584
Moly Manufacturing INC
Ellsworth, KS
3 inspections $66,608
Coastal Precast Systems LLC
Chesapeake, VA
6 inspections $66,616

Compare Benada Aluminum Products, LLC vs A.y. McDonald MFG. CO. side-by-side →

What to do with this record

Use Benada Aluminum Products, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Benada Aluminum Products, LLC against A.y. McDonald MFG. CO., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Benada Aluminum Products, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Benada Aluminum Products, LLC safe to work at? ▼
Based on OSHA records, Benada Aluminum Products, LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 51 violations across 7 inspections, including 33 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Benada Aluminum Products, LLC have? ▼
Benada Aluminum Products, LLC has 51 OSHA violations on record, including 33 serious, 0 willful, and 4 repeat violations. The total current penalty amount is $66,554.
How many OSHA inspections has Benada Aluminum Products, LLC had? ▼
Benada Aluminum Products, LLC has had 7 OSHA inspections, with the first recorded on 2012-03-13 and the most recent on 2018-11-29. This averages 7.3 violations per inspection.
What is the total penalty amount for Benada Aluminum Products, LLC? ▼
Benada Aluminum Products, LLC has been assessed $66,554 in current OSHA penalties, reduced from an initial assessment of $111,680 (a 40.4% reduction).
Does Benada Aluminum Products, LLC have any serious or willful violations? ▼
Yes. Benada Aluminum Products, LLC has 33 serious violations, and 4 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Benada Aluminum Products, LLC operate in? ▼
Benada Aluminum Products, LLC operates in the Manufacturing sector (NAICS code 331316). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Benada Aluminum Products, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Benada Aluminum Products, LLC ranks #3,359 (the top 5% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Benada Aluminum Products, LLC's safety record compare to industry average? ▼
Benada Aluminum Products, LLC's total OSHA penalty of $66,554 is above the Manufacturing industry average of $15,763 per employer (4.2x the average). The employer has 7 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Twins Twins LLC in Labelle, FL is a similar manufacturing employer with $66,550 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 7 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.