PlainWorker
Employers › OR

Manufacturing · Bend, OR

Baldwin Custom Welding & Designs LLC

According to OSHA enforcement records (2010–2026), Baldwin Custom Welding & Designs LLC ranks #96,983 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 4 violations across 2 inspections.

Lower half by penalty50% serious
$225
OSHA penalties
4
Violations cited
2
OSHA inspections
#96,983
of 99,447 penalized employers

Baldwin Custom Welding & Designs LLC in Bend, OR has been the subject of 2 OSHA workplace inspections and 4 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $225. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Baldwin Custom Welding & Designs LLC 2 times over 1 year - more than twice a year on average. These inspections resulted in 4 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #96,983 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Rochester Welding Company INC in Oxford, MI is another manufacturing employer with 2 OSHA inspections on record and $225 in current penalties.

2.0
violations per inspection
50.0%
of violations were serious
#96,983
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 4 violations across 2 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Baldwin Custom Welding & Designs LLC runs well below peers (0.01x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$225 Top 2% most affordable more affordable than 98% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Baldwin Custom Welding & Designs LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0027.555.082.5110.0OSHA inspectionsViolations citedACCURATE ENERGETIC S…, OSHA inspections: 2 · Violations cited: 105PRINCE ERACHEM LLC, OSHA inspections: 2 · Violations cited: 56KTI INC DBA RIALTO C…, OSHA inspections: 2 · Violations cited: 14PALLET LOGISTICS OF …, OSHA inspections: 2 · Violations cited: 15TRANSPORTATION & TRA…, OSHA inspections: 2 · Violations cited: 58OLD BRIDGE CHEMICALS…, OSHA inspections: 2 · Violations cited: 9THE LAKEWOOD BRICK A…, OSHA inspections: 2 · Violations cited: 23INTERNATIONAL PAPER, OSHA inspections: 2 · Violations cited: 17THYBAR CORPORATION, OSHA inspections: 2 · Violations cited: 9SCHAD BOILER SETTING…, OSHA inspections: 2 · Violations cited: 7NIAGARA FABRICATION,…, OSHA inspections: 2 · Violations cited: 19LEX PRODUCTS CORP., OSHA inspections: 2 · Violations cited: 21THE L.S. STARRETT CO…, OSHA inspections: 2 · Violations cited: 10FUSION FURNITURE INC., OSHA inspections: 2 · Violations cited: 5HI TEMP NORTHLAKE LLC, OSHA inspections: 2 · Violations cited: 15KELLY WEBER, OSHA inspections: 2 · Violations cited: 13RICHMOND BAKING OF G…, OSHA inspections: 2 · Violations cited: 7WESTROCK CP, LLC, OSHA inspections: 2 · Violations cited: 4IMPERIAL RESTORATION…, OSHA inspections: 2 · Violations cited: 27SCIOTO SIGN CO., INC., OSHA inspections: 2 · Violations cited: 15Baldwin Custom Weldi…, OSHA inspections: 2 · Violations cited: 4
Baldwin Custom Welding & Designs LLC has 2 OSHA inspections on record and 4 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Baldwin Custom Welding & Designs LLC in the Manufacturing enforcement ledger

In Manufacturing, Baldwin Custom Welding & Designs LLC sits at penalty rank #34,755 of 35,243 penalized establishments ($225 assessed).

How Baldwin Custom Welding & Designs LLC Compares

Baldwin Custom Welding & Designs LLC's 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.01x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2012-06-14

Last Inspection

2012-06-14

Inspection Span

1 yr

Violations / Inspection

2.0

Avg Penalty / Inspection

$113

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 2.0 violations per visit. That's $113 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

50.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

50.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$225

Current Penalty Amount

$225

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Baldwin Custom Welding & Designs LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Baldwin Custom Welding & Designs LLC Industry Avg
Inspections 2 2.6
Violations 4 8.0
Total Penalty $225 $15,763
Avg Penalty per Inspection $113 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Baldwin Custom Welding & Designs LLC, both outside OR so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($225 here).

Pickwick Company $225 IA Acra Grinding CO $225 MI Plastex Supply CO INC $225 SC Rochester Welding Company INC $225 MI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Accurate Energetic Systems, LLC 2 insp. MC Ewen, TN Prince Erachem LLC 2 insp. New Johnsonville, TN Kti INC DBA Rialto Concrete Products 2 insp. Rialto, CA Pallet Logistics of America, LLC 2 insp. Dallas, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Pickwick Company
Cedar Rapids, IA
2 inspections $225
Acra Grinding CO
Sterling Heights, MI
2 inspections $225
Plastex Supply CO INC
Greer, SC
3 inspections $225
Rochester Welding Company INC
Oxford, MI
2 inspections $225
Century Mold Company INC
Shelbyville, TN
2 inspections $225

Compare Baldwin Custom Welding & Designs LLC vs Pickwick Company side-by-side →

What to do with this record

Use Baldwin Custom Welding & Designs LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Baldwin Custom Welding & Designs LLC against Pickwick Company, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Baldwin Custom Welding & Designs LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Baldwin Custom Welding & Designs LLC safe to work at? ▼
Based on OSHA records, Baldwin Custom Welding & Designs LLC's workplace safety record is mixed, with some compliance concerns. The employer has 4 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Baldwin Custom Welding & Designs LLC have? ▼
Baldwin Custom Welding & Designs LLC has 4 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $225.
How many OSHA inspections has Baldwin Custom Welding & Designs LLC had? ▼
Baldwin Custom Welding & Designs LLC has had 2 OSHA inspections, with the first recorded on 2012-06-14 and the most recent on 2012-06-14. This averages 2.0 violations per inspection.
What is the total penalty amount for Baldwin Custom Welding & Designs LLC? ▼
Baldwin Custom Welding & Designs LLC has been assessed $225 in current OSHA penalties.
Does Baldwin Custom Welding & Designs LLC have any serious or willful violations? ▼
Yes. Baldwin Custom Welding & Designs LLC has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Baldwin Custom Welding & Designs LLC operate in? ▼
Baldwin Custom Welding & Designs LLC operates in the Manufacturing sector (NAICS code 332312). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Baldwin Custom Welding & Designs LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Baldwin Custom Welding & Designs LLC ranks #96,983 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Baldwin Custom Welding & Designs LLC's safety record compare to industry average? ▼
Baldwin Custom Welding & Designs LLC's total OSHA penalty of $225 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Rochester Welding Company INC in Oxford, MI is a similar manufacturing employer with $225 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.