PlainWorker
Employers › AL

Manufacturing · Creola, AL

Axis Welding & Machine Works, INC.

According to OSHA enforcement records (2010–2026), Axis Welding & Machine Works, INC. ranks #13,585 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 21 violations across 4 inspections.

Top 25% by penalty57% serious
$24,760
OSHA penalties
21
Violations cited
4
OSHA inspections
#13,585
of 99,447 penalized employers

Axis Welding & Machine Works, INC. in Creola, AL has been the subject of 4 OSHA workplace inspections and 21 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $24,760. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Axis Welding & Machine Works, INC. 4 times across a longer 9-year span, an infrequent cadence. These inspections resulted in 21 violations, averaging 5.3 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #13,585 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 12 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, JBT Corporation in Ogden, UT is another manufacturing employer with 5 OSHA inspections on record and $24,750 in current penalties.

5.3
violations per inspection
57.1%
of violations were serious
#13,585
of 99,447 penalized employers

Compliance score

F 14/100
  • F OSHA safety compliance: 21 violations across 4 OSHA inspections (5.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Axis Welding & Machine Works, INC. runs moderately above peers (1.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$24,760 Bottom 14% least affordable more affordable than 14% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Axis Welding & Machine Works, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.01.620.138.556.975.3OSHA inspectionsViolations citedHANOVER FOODS CORPOR…, OSHA inspections: 4 · Violations cited: 72STARKIST SAMOA CO., OSHA inspections: 4 · Violations cited: 8DYNA-MIX, INC., OSHA inspections: 4 · Violations cited: 9SENECA FOODS CORPORA…, OSHA inspections: 4 · Violations cited: 19INTERNATIONAL PAPER …, OSHA inspections: 4 · Violations cited: 9ALLCOAT TECHNOLOGY, …, OSHA inspections: 4 · Violations cited: 21NARDONE BROTHERS BAK…, OSHA inspections: 4 · Violations cited: 18THE BROASTER COMPANY, OSHA inspections: 4 · Violations cited: 20RAINBOW INC, OSHA inspections: 4 · Violations cited: 40PERSTORP POLYOLS, INC., OSHA inspections: 4 · Violations cited: 7M&M METALS, OSHA inspections: 4 · Violations cited: 11A & L METAL PROCESSING, OSHA inspections: 4 · Violations cited: 22GREAT LAKES CHEESE O…, OSHA inspections: 4 · Violations cited: 7W W WOOD, INC., OSHA inspections: 4 · Violations cited: 5AMERICAN TOOL COMPANY, OSHA inspections: 4 · Violations cited: 17BUCKEYE BODY AND EQU…, OSHA inspections: 4 · Violations cited: 13SIGMA TUBE COMPANY, OSHA inspections: 4 · Violations cited: 7HIGH LINER FOODS USA…, OSHA inspections: 4 · Violations cited: 11RADICI PLASTICS USA …, OSHA inspections: 4 · Violations cited: 8UNIPARTS OLSEN INC., OSHA inspections: 4 · Violations cited: 20Axis Welding & Machi…, OSHA inspections: 4 · Violations cited: 21
Axis Welding & Machine Works, INC. has 4 OSHA inspections on record and 21 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Axis Welding & Machine Works, INC. in the Manufacturing enforcement ledger

In Manufacturing, Axis Welding & Machine Works, INC. sits at penalty rank #6,645 of 35,243 penalized establishments ($24,760 assessed).

How Axis Welding & Machine Works, INC. Compares

Axis Welding & Machine Works, INC.'s 5.25 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.6x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2013-11-22

Last Inspection

2022-12-05

Inspection Span

9 yrs

Violations / Inspection

5.3

Avg Penalty / Inspection

$6,190

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 9 years, averaging 5.3 violations per visit. That's $6,190 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

12

Serious

57.1% of total

0

Willful

0.0% of total

1

Repeat

4.8% of total

8

Other-Than-Serious

38.1% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$35,434

Current Penalty Amount

$24,760

Penalty Reduction

30.1%

What this shows Penalties were reduced by $10,674 from the initial assessment of $35,434. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Axis Welding & Machine Works, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Axis Welding & Machine Works, INC. Industry Avg
Inspections 4 2.6
Violations 21 8.0
Total Penalty $24,760 $15,763
Avg Penalty per Inspection $6,190 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Axis Welding & Machine Works, INC., both outside AL so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($24,760 here).

Cei Equipment Company INC. $24,768 IA JBT Corporation $24,750 UT Centerline Engineering $24,750 MI Cox Machine, INC. $24,750 KS

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

Hanover Foods Corporation 4 insp. Centre Hall, PA Starkist Samoa CO. 4 insp. Pago Pago, AS Dyna-Mix, INC. 4 insp. Tyler, TX Seneca Foods Corporation 4 insp. Gillett, WI

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Ocean Manufacturing
Boynton Beach, FL
0 inspections $0
Cei Equipment Company INC.
Cedar Rapids, IA
2 inspections $24,768
JBT Corporation
Ogden, UT
5 inspections $24,750
Centerline Engineering
Comstock Park, MI
2 inspections $24,750
Cox Machine, INC.
Harper, KS
2 inspections $24,750

Compare Axis Welding & Machine Works, INC. vs Ocean Manufacturing side-by-side →

What to do with this record

Use Axis Welding & Machine Works, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Axis Welding & Machine Works, INC. against Ocean Manufacturing, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Axis Welding & Machine Works, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Axis Welding & Machine Works, INC. safe to work at? ▼
Based on OSHA records, Axis Welding & Machine Works, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 21 violations across 4 inspections, including 12 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Axis Welding & Machine Works, INC. have? ▼
Axis Welding & Machine Works, INC. has 21 OSHA violations on record, including 12 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $24,760.
How many OSHA inspections has Axis Welding & Machine Works, INC. had? ▼
Axis Welding & Machine Works, INC. has had 4 OSHA inspections, with the first recorded on 2013-11-22 and the most recent on 2022-12-05. This averages 5.3 violations per inspection.
What is the total penalty amount for Axis Welding & Machine Works, INC.? ▼
Axis Welding & Machine Works, INC. has been assessed $24,760 in current OSHA penalties, reduced from an initial assessment of $35,434 (a 30.1% reduction).
Does Axis Welding & Machine Works, INC. have any serious or willful violations? ▼
Yes. Axis Welding & Machine Works, INC. has 12 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Axis Welding & Machine Works, INC. operate in? ▼
Axis Welding & Machine Works, INC. operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Axis Welding & Machine Works, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Axis Welding & Machine Works, INC. ranks #13,585 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Axis Welding & Machine Works, INC.'s safety record compare to industry average? ▼
Axis Welding & Machine Works, INC.'s total OSHA penalty of $24,760 is above the Manufacturing industry average of $15,763 per employer (1.6x the average). The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, JBT Corporation in Ogden, UT is a similar manufacturing employer with $24,750 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.