PlainWorker
Employers › IL

Manufacturing · Lyons, IL

Atlas Tool & Die Works, INC.

According to OSHA enforcement records (2010–2026), Atlas Tool & Die Works, INC. has a relatively clean safety record: 1 violations across 2 inspections. See the full breakdown below.

Lower half by penalty100% serious
$1,250
OSHA penalties
1
Violations cited
2
OSHA inspections
#84,669
of 100,495 penalized employers

Atlas Tool & Die Works, INC. in Lyons, IL has been the subject of 2 OSHA workplace inspections and 1 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $1,250. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Atlas Tool & Die Works, INC. 2 times across a longer 10-year span, an infrequent cadence. These inspections resulted in 1 violation, averaging 0.5 per inspection, on the lighter side. Its total OSHA penalty ranks in the lower half of penalized employers nationally. Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, BLND Nation in American Fork, UT is another manufacturing employer with 2 OSHA inspections on record and $1,250 in current penalties.

0.5
violations per inspection
100.0%
of violations were serious
16%
of penalized employers rank lower

How Atlas Tool & Die Works, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Atlas Tool & Die Works, INC. runs well below peers (0.08x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$1,250 Top 16% most affordable more affordable than 84% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Above this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Atlas Tool & Die Works, INC.

The federal enforcement record for Atlas Tool & Die Works, INC. in Lyons, IL includes 2 OSHA inspections and 1 violation, translating to 0.50 violations per inspection. Of those violations, 1 (100.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $1,785 in initial penalties against this employer, later adjusted to a current total of $1,250 - a 30.0% reduction. Average penalty per inspection works out to $625. Against the Manufacturing industry average of $15,410 per employer, this record runs well below peers (0.08x the sector average).

Inspection activity spans from 2013-06-20 to 2023-11-15, a window of roughly 10 years.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2013-06-20

Last Inspection

2023-11-15

Inspection Span

10 yrs

Violations / Inspection

0.5

Avg Penalty / Inspection

$625

Industry Avg / Inspection

$6,092

What this shows 2 inspections over 10 years, averaging 0.5 violations per visit. That's $625 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

1

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$1,785

Current Penalty Amount

$1,250

Penalty Reduction

30.0%

What this shows Penalties were reduced by $535 from the initial assessment of $1,785. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Atlas Tool & Die Works, INC. compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Atlas Tool & Die Works, INC. Industry Avg
Inspections 2 2.5
Violations 1 7.8
Total Penalty $1,250 $15,410
Avg Penalty per Inspection $625 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Best Tugs, LLC
Spanish Fork, UT
2 inspections $1,250
Aurora Specialties Textiles Group
Travelers Rest, SC
2 inspections $1,250
Special Lite INC
Decatur, MI
3 inspections $1,250
BLND Nation
American Fork, UT
2 inspections $1,250
Northern Orthotics and Prosthetic Services CORP
Duluth, MN
2 inspections $1,250

Compare Atlas Tool & Die Works, INC. vs Best Tugs, LLC side-by-side →

Frequently Asked Questions

Is Atlas Tool & Die Works, INC. safe to work at? ▼
Based on OSHA records, Atlas Tool & Die Works, INC.'s workplace safety record is relatively clean, with fewer violations than typical. The employer has 1 violations across 2 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Atlas Tool & Die Works, INC. have? ▼
Atlas Tool & Die Works, INC. has 1 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $1,250.
How many OSHA inspections has Atlas Tool & Die Works, INC. had? ▼
Atlas Tool & Die Works, INC. has had 2 OSHA inspections, with the first recorded on 2013-06-20 and the most recent on 2023-11-15. This averages 0.5 violations per inspection.
What is the total penalty amount for Atlas Tool & Die Works, INC.? ▼
Atlas Tool & Die Works, INC. has been assessed $1,250 in current OSHA penalties, reduced from an initial assessment of $1,785 (a 30.0% reduction).
Does Atlas Tool & Die Works, INC. have any serious or willful violations? ▼
Yes. Atlas Tool & Die Works, INC. has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Atlas Tool & Die Works, INC. operate in? ▼
Atlas Tool & Die Works, INC. operates in the Manufacturing sector (NAICS code 332710). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Atlas Tool & Die Works, INC.'s safety record compare to industry average? ▼
Atlas Tool & Die Works, INC.'s total OSHA penalty of $1,250 is below the Manufacturing industry average of $15,410 per employer. The employer has 2 inspections compared to the industry average of 2.5 per employer. For a direct comparison, BLND Nation in American Fork, UT is a similar manufacturing employer with $1,250 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in IL

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Atlas Tool & Die Works, INC.'s record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.