PlainWorker
Employers › PA

Manufacturing · Eighty Four, PA

Atlas Metal Conversion

According to OSHA enforcement records (2010–2026), Atlas Metal Conversion ranks #57,744 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 4 violations across 2 inspections.

Lower half by penalty75% serious
$4,600
OSHA penalties
4
Violations cited
2
OSHA inspections
#57,744
of 99,447 penalized employers

Atlas Metal Conversion in Eighty Four, PA has been the subject of 2 OSHA workplace inspections and 4 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $4,600. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Atlas Metal Conversion 2 times over 2 years, roughly annually. These inspections resulted in 4 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #57,744 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, SL Sawmill a Division of Acme Pallet INC in Leroy, MI is another manufacturing employer with 2 OSHA inspections on record and $4,600 in current penalties.

2.0
violations per inspection
75.0%
of violations were serious
#57,744
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 4 violations across 2 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Atlas Metal Conversion compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Atlas Metal Conversion runs well below peers (0.29x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$4,600 Top 42% most affordable more affordable than 58% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Atlas Metal Conversion.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.613.626.539.452.4OSHA inspectionsViolations citedSIMMONS ANIMAL NUTRI…, OSHA inspections: 2 · Violations cited: 26UNIT CORPORATION, OSHA inspections: 2 · Violations cited: 50FRONTLINE GAMING, INC., OSHA inspections: 2 · Violations cited: 20SYNCROFLO, INC., OSHA inspections: 2 · Violations cited: 29AMERICAN ENGINEERED …, OSHA inspections: 2 · Violations cited: 33CALUMET MONTANA REFI…, OSHA inspections: 2 · Violations cited: 8POINT BLANK ENTERPRI…, OSHA inspections: 2 · Violations cited: 9KEYSTONE FOODS, OSHA inspections: 2 · Violations cited: 13LIGHTING TECHNOLOGIE…, OSHA inspections: 2 · Violations cited: 12INDUSTRIAL STEAM BOI…, OSHA inspections: 2 · Violations cited: 13REPUBLIC ENGINEERED …, OSHA inspections: 2 · Violations cited: 6COIM USA INC, OSHA inspections: 2 · Violations cited: 23AMADAS COACH, OSHA inspections: 2 · Violations cited: 36ELGIN SWEEPER COMPANY, OSHA inspections: 2 · Violations cited: 6THURSTON MANUFACTURI…, OSHA inspections: 2 · Violations cited: 13CHARLES INDUSTRIES, …, OSHA inspections: 2 · Violations cited: 8CUSTOM EXTRUSION, INC., OSHA inspections: 2 · Violations cited: 24EAST COAST CABINETRY…, OSHA inspections: 2 · Violations cited: 14ATKORE INTERNATIONAL…, OSHA inspections: 2 · Violations cited: 3CONFI-DENTAL PRODUCT…, OSHA inspections: 2 · Violations cited: 20Atlas Metal Conversion, OSHA inspections: 2 · Violations cited: 4
Atlas Metal Conversion has 2 OSHA inspections on record and 4 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Atlas Metal Conversion in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Atlas Metal Conversion ranks #23,840 at $4,600 current penalty.

How Atlas Metal Conversion Compares

Atlas Metal Conversion's 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.29x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2023-12-20

Last Inspection

2025-12-19

Inspection Span

2 yrs

Violations / Inspection

2.0

Avg Penalty / Inspection

$2,300

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 2 years, averaging 2.0 violations per visit. That's $2,300 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

3

Serious

75.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

25.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$7,605

Current Penalty Amount

$4,600

Penalty Reduction

39.5%

What this shows Penalties were reduced by $3,005 from the initial assessment of $7,605. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Atlas Metal Conversion compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Atlas Metal Conversion Industry Avg
Inspections 2 2.6
Violations 4 8.0
Total Penalty $4,600 $15,763
Avg Penalty per Inspection $2,300 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Atlas Metal Conversion, both outside PA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($4,600 here).

G & T Wood Products, INC. $4,600 MD SL Sawmill a Division of Acme Pallet INC $4,600 MI Aulfab, LLC $4,600 OH Heritage Acquisition LLC DBA Heritage Guitars $4,600 MI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Simmons Animal Nutrition, INC. 2 insp. Bridgeville, DE Unit Corporation 2 insp. Oklahoma City, OK Frontline Gaming, INC. 2 insp. Boulder City, NV Syncroflo, INC. 2 insp. Norcross, GA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

G & T Wood Products, INC.
Odenton, MD
2 inspections $4,600
SL Sawmill a Division of Acme Pallet INC
Leroy, MI
2 inspections $4,600
Rex Heat Treat, INC.
Bedford, PA
2 inspections $4,600
Aulfab, LLC
Toledo, OH
2 inspections $4,600
Heritage Acquisition LLC DBA Heritage Guitars
Kalamazoo, MI
3 inspections $4,600

Compare Atlas Metal Conversion vs G & T Wood Products, INC. side-by-side →

What to do with this record

Use Atlas Metal Conversion's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Atlas Metal Conversion against G & T Wood Products, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Atlas Metal Conversion's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Atlas Metal Conversion safe to work at? ▼
Based on OSHA records, Atlas Metal Conversion's workplace safety record is mixed, with some compliance concerns. The employer has 4 violations across 2 inspections, including 3 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Atlas Metal Conversion have? ▼
Atlas Metal Conversion has 4 OSHA violations on record, including 3 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $4,600.
How many OSHA inspections has Atlas Metal Conversion had? ▼
Atlas Metal Conversion has had 2 OSHA inspections, with the first recorded on 2023-12-20 and the most recent on 2025-12-19. This averages 2.0 violations per inspection.
What is the total penalty amount for Atlas Metal Conversion? ▼
Atlas Metal Conversion has been assessed $4,600 in current OSHA penalties, reduced from an initial assessment of $7,605 (a 39.5% reduction).
Does Atlas Metal Conversion have any serious or willful violations? ▼
Yes. Atlas Metal Conversion has 3 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Atlas Metal Conversion operate in? ▼
Atlas Metal Conversion operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Atlas Metal Conversion rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Atlas Metal Conversion ranks #57,744 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Atlas Metal Conversion's safety record compare to industry average? ▼
Atlas Metal Conversion's total OSHA penalty of $4,600 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, SL Sawmill a Division of Acme Pallet INC in Leroy, MI is a similar manufacturing employer with $4,600 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.