PlainWorker
Employers › FL

Manufacturing · Miami, FL

Architectural Moulding & Millworks INC.

According to OSHA enforcement records (2010–2026), Architectural Moulding & Millworks INC. ranks #86,966 of 99,447 penalized U.S. employers by total current penalty, with a average safety record: 3 violations across 2 inspections.

Lower half by penalty33% serious
$978
OSHA penalties
3
Violations cited
2
OSHA inspections
#86,966
of 99,447 penalized employers

Architectural Moulding & Millworks INC. in Miami, FL has been the subject of 2 OSHA workplace inspections and 3 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $978. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Architectural Moulding & Millworks INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 3 violations, averaging 1.5 per inspection. According to OSHA enforcement records, its total current penalty ranks #86,966 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Kraft-Heinz Foods Company in San Diego, CA is another manufacturing employer with 2 OSHA inspections on record and $980 in current penalties.

1.5
violations per inspection
33.3%
of violations were serious
#86,966
of 99,447 penalized employers

Compliance score

C 68/100
  • C OSHA safety compliance: 3 violations across 2 OSHA inspections (1.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Architectural Moulding & Millworks INC. runs well below peers (0.06x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$978 Top 13% most affordable more affordable than 87% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Architectural Moulding & Millworks INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0016.833.550.367.0OSHA inspectionsViolations citedREPUBLIC ENGINEERED PRODUCTS INC., OSHA inspections: 2 · Violations cited: 25BERRY GLOBAL, INC., OSHA inspections: 2 · Violations cited: 7HEIDELBERG MATERIALS NORTHEAST LLC, OSHA inspections: 2 · Violations cited: 19R & E Pallets, Inc, OSHA inspections: 2 · Violations cited: 8SENECA FOODS CORPORATION, OSHA inspections: 2 · Violations cited: 5BENSON'S OLD HOME KITCHENS BAKERY, LLC, OSHA inspections: 2 · Violations cited: 7DIVERSIFIED SERVICES, INC., OSHA inspections: 2 · Violations cited: 14HAPPY ORCHARD, OSHA inspections: 2 · Violations cited: 8ARCONIC, OSHA inspections: 2 · Violations cited: 8M-POWER CHEMICALS L C, OSHA inspections: 2 · Violations cited: 20POLYVEL, INC., OSHA inspections: 2 · Violations cited: 12THE WESTON COMPANY, OSHA inspections: 2 · Violations cited: 64NIMSGERN STEEL CORP, OSHA inspections: 2 · Violations cited: 10BD MEATS INC., OSHA inspections: 2 · Violations cited: 10IHP OPERATIONS, LLC, OSHA inspections: 2 · Violations cited: 5DOVE DIE & STAMPING COMPANY, OSHA inspections: 2 · Violations cited: 4LEIGH FIBERS INC, OSHA inspections: 2 · Violations cited: 27COMMODORE CORPORATION, OSHA inspections: 2 · Violations cited: 19PROCESS EQUIPMENT, INC., OSHA inspections: 2 · Violations cited: 7NATURAL ENVIRONMENTAL PROTECTION COMPANY, OSHA inspections: 2 · Violations cited: 32Architectural Moulding & Millworks INC., OSHA inspections: 2 · Violations cited: 3
Architectural Moulding & Millworks INC. has 2 OSHA inspections on record and 3 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Architectural Moulding & Millworks INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Architectural Moulding & Millworks INC. ranks #32,494 at $978 current penalty.

How Architectural Moulding & Millworks INC. Compares

Architectural Moulding & Millworks INC.'s 1.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.06x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2017-03-09

Last Inspection

2017-03-21

Inspection Span

1 yr

Violations / Inspection

1.5

Avg Penalty / Inspection

$489

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 1.5 violations per visit. That's $489 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

1

Serious

33.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

66.7% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$1,630

Current Penalty Amount

$978

Penalty Reduction

40.0%

What this shows Penalties were reduced by $652 from the initial assessment of $1,630. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Architectural Moulding & Millworks INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Architectural Moulding & Millworks INC. Industry Avg
Inspections 2 2.6
Violations 3 8.0
Total Penalty $978 $15,763
Avg Penalty per Inspection $489 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Architectural Moulding & Millworks INC., both outside FL so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($978 here).

Rowe Electronics $976 IA Utac $980 CA Kraft-Heinz Foods Company $980 CA Concorde Battery Corporation $980 CA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Republic Engineered Products INC. 2 insp. Lorain, OH Berry Global, INC. 2 insp. Sterling, MA Heidelberg Materials Northeast LLC 2 insp. Nazareth, PA R & E Pallets, Inc 2 insp. Michigan City, IN

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Rowe Electronics
Norwalk, IA
2 inspections $976
Utac
Hayward, CA
2 inspections $980
Kraft-Heinz Foods Company
San Diego, CA
2 inspections $980
Concorde Battery Corporation
West Covina, CA
2 inspections $980
Quemetco, INC.
City of Industry, CA
3 inspections $980

Compare Architectural Moulding & Millworks INC. vs Rowe Electronics side-by-side →

What to do with this record

Use Architectural Moulding & Millworks INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Architectural Moulding & Millworks INC. against Rowe Electronics, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Architectural Moulding & Millworks INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Architectural Moulding & Millworks INC. safe to work at? ▼
Based on OSHA records, Architectural Moulding & Millworks INC.'s workplace safety record is average, with typical for this industry. The employer has 3 violations across 2 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Architectural Moulding & Millworks INC. have? ▼
Architectural Moulding & Millworks INC. has 3 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $978.
How many OSHA inspections has Architectural Moulding & Millworks INC. had? ▼
Architectural Moulding & Millworks INC. has had 2 OSHA inspections, with the first recorded on 2017-03-09 and the most recent on 2017-03-21. This averages 1.5 violations per inspection.
What is the total penalty amount for Architectural Moulding & Millworks INC.? ▼
Architectural Moulding & Millworks INC. has been assessed $978 in current OSHA penalties, reduced from an initial assessment of $1,630 (a 40.0% reduction).
Does Architectural Moulding & Millworks INC. have any serious or willful violations? ▼
Yes. Architectural Moulding & Millworks INC. has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Architectural Moulding & Millworks INC. operate in? ▼
Architectural Moulding & Millworks INC. operates in the Manufacturing sector (NAICS code 321918). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Architectural Moulding & Millworks INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Architectural Moulding & Millworks INC. ranks #86,966 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Architectural Moulding & Millworks INC.'s safety record compare to industry average? ▼
Architectural Moulding & Millworks INC.'s total OSHA penalty of $978 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Kraft-Heinz Foods Company in San Diego, CA is a similar manufacturing employer with $980 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.