PlainWorker
Employers › MT

Manufacturing · Belgrade, MT

Arch Metals, INC.

According to OSHA enforcement records (2010–2026), Arch Metals, INC. has a mixed safety record: 6 violations across 2 inspections. See the full breakdown below.

Lower half by penalty100% serious
$3,882
OSHA penalties
6
Violations cited
2
OSHA inspections
#62,942
of 100,495 penalized employers

Arch Metals, INC. in Belgrade, MT has been the subject of 2 OSHA workplace inspections and 6 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $3,882. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Arch Metals, INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 6 violations, averaging 3.0 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the lower half of penalized employers nationally. Of these, 6 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Bagels By Bell in Oceanside, NY is another manufacturing employer with 0 OSHA inspections on record and $0 in current penalties.

3.0
violations per inspection
100.0%
of violations were serious
37%
of penalized employers rank lower

How Arch Metals, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Arch Metals, INC. runs well below peers (0.25x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$3,882 Top 37% most affordable more affordable than 63% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Above this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Arch Metals, INC.

The federal enforcement record for Arch Metals, INC. in Belgrade, MT includes 2 OSHA inspections and 6 violations, translating to 3.00 violations per inspection. Of those violations, 6 (100.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $7,761 in initial penalties against this employer, later adjusted to a current total of $3,882 - a 50.0% reduction. Average penalty per inspection works out to $1,941. Against the Manufacturing industry average of $15,410 per employer, this record runs well below peers (0.25x the sector average).

Inspection activity spans from 2018-03-05 to 2018-03-05, a window of roughly 1 year.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2018-03-05

Last Inspection

2018-03-05

Inspection Span

1 yr

Violations / Inspection

3.0

Avg Penalty / Inspection

$1,941

Industry Avg / Inspection

$6,092

What this shows 2 inspections over 1 year, averaging 3.0 violations per visit. That's $1,941 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

6

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$7,761

Current Penalty Amount

$3,882

Penalty Reduction

50.0%

What this shows Penalties were reduced by $3,879 from the initial assessment of $7,761. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Arch Metals, INC. compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Arch Metals, INC. Industry Avg
Inspections 2 2.5
Violations 6 7.8
Total Penalty $3,882 $15,410
Avg Penalty per Inspection $1,941 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Air Control, Inc.
Clinton, IA
0 inspections $0
Bagels By Bell
Oceanside, NY
0 inspections $0
Skydex Technologies, LLC
Centennial, CO
2 inspections $3,880
North American Acquisition Corporation
Elgin, IL
2 inspections $3,880
Rail One USA
Clinton, IA
2 inspections $3,880

Compare Arch Metals, INC. vs Air Control, Inc. side-by-side →

Frequently Asked Questions

Is Arch Metals, INC. safe to work at? ▼
Based on OSHA records, Arch Metals, INC.'s workplace safety record is mixed, with some compliance concerns. The employer has 6 violations across 2 inspections, including 6 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Arch Metals, INC. have? ▼
Arch Metals, INC. has 6 OSHA violations on record, including 6 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $3,882.
How many OSHA inspections has Arch Metals, INC. had? ▼
Arch Metals, INC. has had 2 OSHA inspections, with the first recorded on 2018-03-05 and the most recent on 2018-03-05. This averages 3.0 violations per inspection.
What is the total penalty amount for Arch Metals, INC.? ▼
Arch Metals, INC. has been assessed $3,882 in current OSHA penalties, reduced from an initial assessment of $7,761 (a 50.0% reduction).
Does Arch Metals, INC. have any serious or willful violations? ▼
Yes. Arch Metals, INC. has 6 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Arch Metals, INC. operate in? ▼
Arch Metals, INC. operates in the Manufacturing sector (NAICS code 332323). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Arch Metals, INC.'s safety record compare to industry average? ▼
Arch Metals, INC.'s total OSHA penalty of $3,882 is below the Manufacturing industry average of $15,410 per employer. The employer has 2 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Bagels By Bell in Oceanside, NY is a similar manufacturing employer with $0 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in MT

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Arch Metals, INC.'s record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.