PlainWorker
Employers › OH

Manufacturing · Shelby, OH

Arcelormittal Tubular Products Shelby LLC.

According to OSHA enforcement records (2010–2026), Arcelormittal Tubular Products Shelby LLC. ranks #14,753 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 7 violations across 2 inspections.

Top 25% by penalty86% serious
$23,175
OSHA penalties
7
Violations cited
2
OSHA inspections
#14,753
of 99,447 penalized employers

Arcelormittal Tubular Products Shelby LLC. in Shelby, OH has been the subject of 2 OSHA workplace inspections and 7 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $23,175. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Arcelormittal Tubular Products Shelby LLC. 2 times over 2 years, roughly annually. These inspections resulted in 7 violations, averaging 3.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #14,753 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 6 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Hiland Dairy Foods CO, LLC. in Dallas, TX is another manufacturing employer with 2 OSHA inspections on record and $23,170 in current penalties.

3.5
violations per inspection
85.7%
of violations were serious
#14,753
of 99,447 penalized employers

Compliance score

F 39/100
  • F OSHA safety compliance: 7 violations across 2 OSHA inspections (3.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Arcelormittal Tubular Products Shelby LLC. runs moderately above peers (1.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$23,175 Bottom 15% least affordable more affordable than 15% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Arcelormittal Tubular Products Shelby LLC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.87.614.521.428.3OSHA inspectionsViolations citedSIMTEK INC., OSHA inspections: 2 · Violations cited: 25ACTION ENGINEERING, …, OSHA inspections: 2 · Violations cited: 27AMPAC MOBILE HOLDING…, OSHA inspections: 2 · Violations cited: 2GALPERTI INC., OSHA inspections: 2 · Violations cited: 12MERCURY PAPER, INC., OSHA inspections: 2 · Violations cited: 14ATG SUPPLY INC., OSHA inspections: 2 · Violations cited: 3BORAL CONCRETE PRODU…, OSHA inspections: 2 · Violations cited: 9SABIC INNOVATIVE PLA…, OSHA inspections: 2 · Violations cited: 5PLASTIC TECHNOLOGIES…, OSHA inspections: 2 · Violations cited: 12SCHULT INDUSTRIES, OSHA inspections: 2 · Violations cited: 8PAK-LITE, INC., OSHA inspections: 2 · Violations cited: 7ALL AMERICAN SPACE S…, OSHA inspections: 2 · Violations cited: 13GAMMA AEROSPACE, OSHA inspections: 2 · Violations cited: 13AZTECA BAKERY LLC, OSHA inspections: 2 · Violations cited: 6AMERICAN PUZZLE COMP…, OSHA inspections: 2 · Violations cited: 5VAL TECH HOLDINGS, I…, OSHA inspections: 2 · Violations cited: 10WATSON MCDANIEL COMP…, OSHA inspections: 2 · Violations cited: 11J. L. CLARK, INC., OSHA inspections: 2 · Violations cited: 3TOUCHMARK, INCORPORA…, OSHA inspections: 2 · Violations cited: 14DIXIE IRON WORKS, LTD., OSHA inspections: 2 · Violations cited: 4Arcelormittal Tubula…, OSHA inspections: 2 · Violations cited: 7
Arcelormittal Tubular Products Shelby LLC. has 2 OSHA inspections on record and 7 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Arcelormittal Tubular Products Shelby LLC. in the Manufacturing enforcement ledger

Manufacturing sector: Arcelormittal Tubular Products Shelby LLC. is the #7,205 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($23,175).

How Arcelormittal Tubular Products Shelby LLC. Compares

Arcelormittal Tubular Products Shelby LLC.'s 3.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.5x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2015-02-18

Last Inspection

2017-06-12

Inspection Span

2 yrs

Violations / Inspection

3.5

Avg Penalty / Inspection

$11,588

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 2 years, averaging 3.5 violations per visit. That's $11,588 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

6

Serious

85.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

14.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$53,350

Current Penalty Amount

$23,175

Penalty Reduction

56.6%

What this shows Penalties were reduced by $30,175 from the initial assessment of $53,350. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Arcelormittal Tubular Products Shelby LLC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Arcelormittal Tubular Products Shelby LLC. Industry Avg
Inspections 2 2.6
Violations 7 8.0
Total Penalty $23,175 $15,763
Avg Penalty per Inspection $11,588 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Arcelormittal Tubular Products Shelby LLC., both outside OH so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($23,175 here).

Cobey INC. $23,175 NY Azz Enclosure Systems $23,175 KS Hiland Dairy Foods CO, LLC. $23,170 TX Amesbury Group DBA Bandlock CORP $23,170 CA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Simtek INC. 2 insp. Amityville, NY Action Engineering, INC. 2 insp. Tucker, GA Ampac Mobile Holdings LLC 2 insp. Mobile, AL Galperti INC. 2 insp. Houston, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Cobey INC.
Buffalo, NY
3 inspections $23,175
Azz Enclosure Systems
Pittsburg, KS
2 inspections $23,175
Consolidated Precision Products CORP.
Eastlake, OH
2 inspections $23,173
Idx Dayton, LLC
Dayton, OH
4 inspections $23,180
Hiland Dairy Foods CO, LLC.
Dallas, TX
2 inspections $23,170

Compare Arcelormittal Tubular Products Shelby LLC. vs Cobey INC. side-by-side →

What to do with this record

Use Arcelormittal Tubular Products Shelby LLC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Arcelormittal Tubular Products Shelby LLC. against Cobey INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Arcelormittal Tubular Products Shelby LLC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Arcelormittal Tubular Products Shelby LLC. safe to work at? ▼
Based on OSHA records, Arcelormittal Tubular Products Shelby LLC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 7 violations across 2 inspections, including 6 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Arcelormittal Tubular Products Shelby LLC. have? ▼
Arcelormittal Tubular Products Shelby LLC. has 7 OSHA violations on record, including 6 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $23,175.
How many OSHA inspections has Arcelormittal Tubular Products Shelby LLC. had? ▼
Arcelormittal Tubular Products Shelby LLC. has had 2 OSHA inspections, with the first recorded on 2015-02-18 and the most recent on 2017-06-12. This averages 3.5 violations per inspection.
What is the total penalty amount for Arcelormittal Tubular Products Shelby LLC.? ▼
Arcelormittal Tubular Products Shelby LLC. has been assessed $23,175 in current OSHA penalties, reduced from an initial assessment of $53,350 (a 56.6% reduction).
Does Arcelormittal Tubular Products Shelby LLC. have any serious or willful violations? ▼
Yes. Arcelormittal Tubular Products Shelby LLC. has 6 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Arcelormittal Tubular Products Shelby LLC. operate in? ▼
Arcelormittal Tubular Products Shelby LLC. operates in the Manufacturing sector (NAICS code 331210). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Arcelormittal Tubular Products Shelby LLC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Arcelormittal Tubular Products Shelby LLC. ranks #14,753 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Arcelormittal Tubular Products Shelby LLC.'s safety record compare to industry average? ▼
Arcelormittal Tubular Products Shelby LLC.'s total OSHA penalty of $23,175 is above the Manufacturing industry average of $15,763 per employer (1.5x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Hiland Dairy Foods CO, LLC. in Dallas, TX is a similar manufacturing employer with $23,170 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.