PlainWorker
Employers › SC

Manufacturing · Georgetown, SC

Arcelormittal Georgetown INC

According to OSHA enforcement records (2010–2026), Arcelormittal Georgetown INC ranks #3,318 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 57 violations across 7 inspections.

Top 5% by penalty89% serious
$67,011
OSHA penalties
57
Violations cited
7
OSHA inspections
#3,318
of 99,447 penalized employers

Arcelormittal Georgetown INC in Georgetown, SC has been the subject of 7 OSHA workplace inspections and 57 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $67,011. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has kept close, sustained watch on Arcelormittal Georgetown INC: 7 inspections in 1 year, several times a year. These inspections resulted in 57 violations, averaging 8.1 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #3,318 of 99,447 penalized U.S. employers (the top 5% of penalized employers nationally). Of these, 51 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs well above peers (2.7x the sector average) on inspection frequency. For comparison, Dixie Industrial Finishing CO., INC. in Tucker, GA is another manufacturing employer with 4 OSHA inspections on record and $67,000 in current penalties.

8.1
violations per inspection
89.5%
of violations were serious
#3,318
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 57 violations across 7 OSHA inspections (8.1 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Arcelormittal Georgetown INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Arcelormittal Georgetown INC runs well above peers (4.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$67,011 Bottom 3% least affordable more affordable than 3% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Below this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,150 U.S. employers with a penalty (5%). This entry ($67,011) is well above this band, the chart's rightmost open-ended bucket. This employer: $67,011 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Arcelormittal Georgetown INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both7.07.077.07.00.315.230.044.959.7OSHA inspectionsViolations citedHIGHLAND BAKING COMP…, OSHA inspections: 7 · Violations cited: 9MARINE METAL, INC., OSHA inspections: 7 · Violations cited: 5SOURCECUT INDUSTRIES…, OSHA inspections: 7 · Violations cited: 19ERIE WOOD PRODUCTS, …, OSHA inspections: 7 · Violations cited: 35CERSOSIMO LUMBER COM…, OSHA inspections: 7 · Violations cited: 19REXNORD INDUSTRIES, …, OSHA inspections: 7 · Violations cited: 11OMEGA PLASTICS CORPO…, OSHA inspections: 7 · Violations cited: 26ERICO INTERNATIONAL …, OSHA inspections: 7 · Violations cited: 15SOMIC AMERICA, INC., OSHA inspections: 7 · Violations cited: 5VALMONT INDUSTRIES, …, OSHA inspections: 7 · Violations cited: 15MMI ENGINEERED SOLUT…, OSHA inspections: 7 · Violations cited: 364EVER ALUMINUM PRODU…, OSHA inspections: 7 · Violations cited: 30CEDAR'S MEDITERRANEA…, OSHA inspections: 7 · Violations cited: 11BUNN-O-MATIC CORPORA…, OSHA inspections: 7 · Violations cited: 13KKMI, OSHA inspections: 7 · Violations cited: 8ARCELORMITTAL, OSHA inspections: 7 · Violations cited: 3EXTRUDEX ALUMINUM INC., OSHA inspections: 7 · Violations cited: 20NEW ANGUS, LLC, OSHA inspections: 7 · Violations cited: 25G & W ELECTRIC COMPANY, OSHA inspections: 7 · Violations cited: 5HOWARD INDUSTRIES, OSHA inspections: 7 · Violations cited: 4Arcelormittal George…, OSHA inspections: 7 · Violations cited: 57
Arcelormittal Georgetown INC has 7 OSHA inspections on record and 57 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Arcelormittal Georgetown INC in the Manufacturing enforcement ledger

Manufacturing sector: Arcelormittal Georgetown INC is the #1,710 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($67,011).

How Arcelormittal Georgetown INC Compares

Arcelormittal Georgetown INC's 8.14 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (4.3x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

7

First Inspection

2012-03-13

Last Inspection

2013-08-06

Inspection Span

1 yr

Violations / Inspection

8.1

Avg Penalty / Inspection

$9,573

Industry Avg / Inspection

$6,093

What this shows 7 inspections over 1 year, averaging 8.1 violations per visit. That's $9,573 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

51

Serious

89.5% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

6

Other-Than-Serious

10.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$67,475

Current Penalty Amount

$67,011

Penalty Reduction

0.7%

What this shows Penalties were reduced by $464 from the initial assessment of $67,475. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Arcelormittal Georgetown INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Arcelormittal Georgetown INC Industry Avg
Inspections 7 2.6
Violations 57 8.0
Total Penalty $67,011 $15,763
Avg Penalty per Inspection $9,573 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Arcelormittal Georgetown INC, both outside SC so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($67,011 here).

Universal Stamping INC $67,000 MI Dixie Industrial Finishing CO., INC. $67,000 GA Three Rivers Energy, LLC $67,000 OH McNeil Group, INC. $67,000 OH

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (7 inspections here).

Highland Baking Company, INC. 7 insp. Northbrook, IL Marine Metal, INC. 7 insp. Brownsville, TX Sourcecut Industries, INC. 7 insp. Osseo, WI Erie Wood Products, LLC 7 insp. Erie, PA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Universal Stamping INC
Benton Harbor, MI
8 inspections $67,000
Dixie Industrial Finishing CO., INC.
Tucker, GA
4 inspections $67,000
Three Rivers Energy, LLC
Coshocton, OH
3 inspections $67,000
McNeil Group, INC.
Columbus, OH
2 inspections $67,000
Eldoraldo Stone, LLC
Holmesville, OH
2 inspections $66,998

Compare Arcelormittal Georgetown INC vs Universal Stamping INC side-by-side →

What to do with this record

Use Arcelormittal Georgetown INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Arcelormittal Georgetown INC against Universal Stamping INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Arcelormittal Georgetown INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Arcelormittal Georgetown INC safe to work at? ▼
Based on OSHA records, Arcelormittal Georgetown INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 57 violations across 7 inspections, including 51 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Arcelormittal Georgetown INC have? ▼
Arcelormittal Georgetown INC has 57 OSHA violations on record, including 51 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $67,011.
How many OSHA inspections has Arcelormittal Georgetown INC had? ▼
Arcelormittal Georgetown INC has had 7 OSHA inspections, with the first recorded on 2012-03-13 and the most recent on 2013-08-06. This averages 8.1 violations per inspection.
What is the total penalty amount for Arcelormittal Georgetown INC? ▼
Arcelormittal Georgetown INC has been assessed $67,011 in current OSHA penalties, reduced from an initial assessment of $67,475 (a 0.7% reduction).
Does Arcelormittal Georgetown INC have any serious or willful violations? ▼
Yes. Arcelormittal Georgetown INC has 51 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Arcelormittal Georgetown INC operate in? ▼
Arcelormittal Georgetown INC operates in the Manufacturing sector (NAICS code 331111). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Arcelormittal Georgetown INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Arcelormittal Georgetown INC ranks #3,318 (the top 5% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Arcelormittal Georgetown INC's safety record compare to industry average? ▼
Arcelormittal Georgetown INC's total OSHA penalty of $67,011 is above the Manufacturing industry average of $15,763 per employer (4.3x the average). The employer has 7 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Dixie Industrial Finishing CO., INC. in Tucker, GA is a similar manufacturing employer with $67,000 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 7 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.