PlainWorker
Employers › OH

Manufacturing · Cleveland, OH

Ameco USA Metal Fabricating Solutions LLC.

According to OSHA enforcement records (2010–2026), Ameco USA Metal Fabricating Solutions LLC. ranks #40,207 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 16 violations across 2 inspections.

Upper half by penalty56% serious
$8,400
OSHA penalties
16
Violations cited
2
OSHA inspections
#40,207
of 99,447 penalized employers

Ameco USA Metal Fabricating Solutions LLC. in Cleveland, OH has been the subject of 2 OSHA workplace inspections and 16 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $8,400. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Ameco USA Metal Fabricating Solutions LLC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 16 violations, averaging 8.0 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #40,207 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 9 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Solidification Products International, INC in North Haven, CT is another manufacturing employer with 2 OSHA inspections on record and $8,400 in current penalties.

8.0
violations per inspection
56.3%
of violations were serious
#40,207
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 16 violations across 2 OSHA inspections (8.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Ameco USA Metal Fabricating Solutions LLC. runs moderately below peers (0.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$8,400 Bottom 40% least affordable more affordable than 40% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Ameco USA Metal Fabricating Solutions LLC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.01.310.419.528.637.6OSHA inspectionsViolations citedINTEGRATED TURF SOLU…, OSHA inspections: 2 · Violations cited: 7KOSER IRON WORKS, INC., OSHA inspections: 2 · Violations cited: 36YANK MARINE, INC., OSHA inspections: 2 · Violations cited: 25SOUTHERN GROUTS AND …, OSHA inspections: 2 · Violations cited: 19MARUICHI AMERICAN CORP, OSHA inspections: 2 · Violations cited: 9NUPRESS OF MIAMI, INC., OSHA inspections: 2 · Violations cited: 22ITW POLYMER SEALANTS…, OSHA inspections: 2 · Violations cited: 17BPI LABS, LLC, OSHA inspections: 2 · Violations cited: 4AVPS OF VIRGINIA LLC, OSHA inspections: 2 · Violations cited: 6MCCOWN VENEER, INC., OSHA inspections: 2 · Violations cited: 7MEGA INDUSTRIES, LLC, OSHA inspections: 2 · Violations cited: 23DYNAMIC RESEARCH TEC…, OSHA inspections: 2 · Violations cited: 8ROVANCO PIPING SYSTE…, OSHA inspections: 2 · Violations cited: 16GILSTER - MARY LEE C…, OSHA inspections: 2 · Violations cited: 6TORRANCE CASTINGS, I…, OSHA inspections: 2 · Violations cited: 13SUNOPTICS, INC., OSHA inspections: 2 · Violations cited: 7CCI CAPCO, LLC, OSHA inspections: 2 · Violations cited: 3ELECTRO-COATINGS OF …, OSHA inspections: 2 · Violations cited: 7MTD CONSUMER GROUP I…, OSHA inspections: 2 · Violations cited: 5KANSAS DAIRY INGREDI…, OSHA inspections: 2 · Violations cited: 3Ameco USA Metal Fabr…, OSHA inspections: 2 · Violations cited: 16
Ameco USA Metal Fabricating Solutions LLC. has 2 OSHA inspections on record and 16 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Ameco USA Metal Fabricating Solutions LLC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Ameco USA Metal Fabricating Solutions LLC. ranks #17,722 at $8,400 current penalty.

How Ameco USA Metal Fabricating Solutions LLC. Compares

Ameco USA Metal Fabricating Solutions LLC.'s 8.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.5x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2011-06-28

Last Inspection

2011-06-28

Inspection Span

1 yr

Violations / Inspection

8.0

Avg Penalty / Inspection

$4,200

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 8.0 violations per visit. That's $4,200 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

9

Serious

56.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

7

Other-Than-Serious

43.8% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$20,400

Current Penalty Amount

$8,400

Penalty Reduction

58.8%

What this shows Penalties were reduced by $12,000 from the initial assessment of $20,400. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Ameco USA Metal Fabricating Solutions LLC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Ameco USA Metal Fabricating Solutions LLC. Industry Avg
Inspections 2 2.6
Violations 16 8.0
Total Penalty $8,400 $15,763
Avg Penalty per Inspection $4,200 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Ameco USA Metal Fabricating Solutions LLC., both outside OH so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($8,400 here).

Future Foam, INC. $8,400 FL Lilbe Contracting D/B/a NYC Woodworks $8,400 NY Park Aerospace Technologies CORP. $8,400 KS Ball Corporation $8,400 WI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Integrated Turf Solutions, LLC 2 insp. Chatsworth, GA Koser Iron Works, INC. 2 insp. Barron, WI Yank Marine, INC. 2 insp. Tuckahoe, NJ Southern Grouts and Mortars 2 insp. Waxahachie, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Lilbe Contracting D/B/a NYC Woodworks
Mount Vernon, NY
3 inspections $8,400
Kaltec Food Packaging INC.
Port Jervis, NY
2 inspections $8,400
Solidification Products International, INC
North Haven, CT
2 inspections $8,400
Rochling Leripa Papertech LLC
Kimberly, WI
2 inspections $8,400
Sedan Farm Supply, INC.
Sedan, KS
2 inspections $8,400

Compare Ameco USA Metal Fabricating Solutions LLC. vs Lilbe Contracting D/B/a NYC Woodworks side-by-side →

What to do with this record

Use Ameco USA Metal Fabricating Solutions LLC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Ameco USA Metal Fabricating Solutions LLC. against Lilbe Contracting D/B/a NYC Woodworks, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Ameco USA Metal Fabricating Solutions LLC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Ameco USA Metal Fabricating Solutions LLC. safe to work at? ▼
Based on OSHA records, Ameco USA Metal Fabricating Solutions LLC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 16 violations across 2 inspections, including 9 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Ameco USA Metal Fabricating Solutions LLC. have? ▼
Ameco USA Metal Fabricating Solutions LLC. has 16 OSHA violations on record, including 9 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $8,400.
How many OSHA inspections has Ameco USA Metal Fabricating Solutions LLC. had? ▼
Ameco USA Metal Fabricating Solutions LLC. has had 2 OSHA inspections, with the first recorded on 2011-06-28 and the most recent on 2011-06-28. This averages 8.0 violations per inspection.
What is the total penalty amount for Ameco USA Metal Fabricating Solutions LLC.? ▼
Ameco USA Metal Fabricating Solutions LLC. has been assessed $8,400 in current OSHA penalties, reduced from an initial assessment of $20,400 (a 58.8% reduction).
Does Ameco USA Metal Fabricating Solutions LLC. have any serious or willful violations? ▼
Yes. Ameco USA Metal Fabricating Solutions LLC. has 9 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Ameco USA Metal Fabricating Solutions LLC. operate in? ▼
Ameco USA Metal Fabricating Solutions LLC. operates in the Manufacturing sector (NAICS code 332312). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Ameco USA Metal Fabricating Solutions LLC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Ameco USA Metal Fabricating Solutions LLC. ranks #40,207 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Ameco USA Metal Fabricating Solutions LLC.'s safety record compare to industry average? ▼
Ameco USA Metal Fabricating Solutions LLC.'s total OSHA penalty of $8,400 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Solidification Products International, INC in North Haven, CT is a similar manufacturing employer with $8,400 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.