PlainWorker
Employers › CA

Manufacturing · Oxnard, CA

Aluminum Precision Products INC.

According to OSHA enforcement records (2010–2026), Aluminum Precision Products INC. ranks #15,965 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 8 violations across 2 inspections.

Top 25% by penalty38% serious
$21,680
OSHA penalties
8
Violations cited
2
OSHA inspections
#15,965
of 99,447 penalized employers

Aluminum Precision Products INC. in Oxnard, CA has been the subject of 2 OSHA workplace inspections and 8 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $21,680. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Aluminum Precision Products INC. 2 times over 2 years, roughly annually. These inspections resulted in 8 violations, averaging 4.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #15,965 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Steel and Alloy Utility Products INC. in MC Donald, OH is another manufacturing employer with 2 OSHA inspections on record and $21,684 in current penalties.

4.0
violations per inspection
37.5%
of violations were serious
#15,965
of 99,447 penalized employers

Compliance score

F 32/100
  • F OSHA safety compliance: 8 violations across 2 OSHA inspections (4.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Aluminum Precision Products INC. runs moderately above peers (1.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$21,680 Bottom 16% least affordable more affordable than 16% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Aluminum Precision Products INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.912.52435.647.1OSHA inspectionsViolations citedMORRAL COMPANIES, LLC, OSHA inspections: 2 · Violations cited: 21CONTINENTAL MFG. COM…, OSHA inspections: 2 · Violations cited: 41NEW BRUNSWICK SCIENT…, OSHA inspections: 2 · Violations cited: 35US PIPE AND FOUNDRY …, OSHA inspections: 2 · Violations cited: 45GLOBAL ABRASIVE PROD…, OSHA inspections: 2 · Violations cited: 24WILBERT FUNERAL SERV…, OSHA inspections: 2 · Violations cited: 16FIRST BRANDS GROUP, …, OSHA inspections: 2 · Violations cited: 13BELTEX CORPORATION, OSHA inspections: 2 · Violations cited: 12PARKDALE AMERICA, LLC., OSHA inspections: 2 · Violations cited: 18CREATIVE POLYMERS, LLC, OSHA inspections: 2 · Violations cited: 15RAYMOND BUILDING SUP…, OSHA inspections: 2 · Violations cited: 9SUMMIT MILK PRODUCTS…, OSHA inspections: 2 · Violations cited: 6ACCURUS AEROSPACE WI…, OSHA inspections: 2 · Violations cited: 7H. NAGEL & SON CO., OSHA inspections: 2 · Violations cited: 22LIBERTO MANUFACTURIN…, OSHA inspections: 2 · Violations cited: 8HILAND DAIRY FOODS C…, OSHA inspections: 2 · Violations cited: 3TRI TOWN PRECISION P…, OSHA inspections: 2 · Violations cited: 8CRYSTAL PRINT, INC., OSHA inspections: 2 · Violations cited: 14PRIME DESIGN, INC., OSHA inspections: 2 · Violations cited: 15COUNTRYSIDE BARNS, I…, OSHA inspections: 2 · Violations cited: 24Aluminum Precision P…, OSHA inspections: 2 · Violations cited: 8
Aluminum Precision Products INC. has 2 OSHA inspections on record and 8 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Aluminum Precision Products INC. in the Manufacturing enforcement ledger

Manufacturing sector: Aluminum Precision Products INC. is the #7,769 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($21,680).

How Aluminum Precision Products INC. Compares

Aluminum Precision Products INC.'s 4.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2017-03-29

Last Inspection

2019-08-14

Inspection Span

2 yrs

Violations / Inspection

4.0

Avg Penalty / Inspection

$10,840

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 2 years, averaging 4.0 violations per visit. That's $10,840 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

3

Serious

37.5% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

62.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$52,330

Current Penalty Amount

$21,680

Penalty Reduction

58.6%

What this shows Penalties were reduced by $30,650 from the initial assessment of $52,330. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Aluminum Precision Products INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Aluminum Precision Products INC. Industry Avg
Inspections 2 2.6
Violations 8 8.0
Total Penalty $21,680 $15,763
Avg Penalty per Inspection $10,840 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Aluminum Precision Products INC., both outside CA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($21,680 here).

Inner-Tite CORP. $21,677 MA Steel and Alloy Utility Products INC. $21,684 OH Eatem Corporation $21,675 NJ Harper Trucks INC. $21,675 KS

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Morral Companies, LLC 2 insp. Morral, OH Continental MFG. Company, INC. 2 insp. Houston, TX New Brunswick Scientific CO., INC. 2 insp. Edison, NJ US Pipe and Foundry Company 2 insp. Bessemer, AL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Imerys Fused Minerals
Greeneville, TN
0 inspections $0
Inner-Tite CORP.
Holden, MA
3 inspections $21,677
Steel and Alloy Utility Products INC.
MC Donald, OH
2 inspections $21,684
Laird MFG., LLC
Merced, CA
3 inspections $21,675
Eatem Corporation
Vineland, NJ
2 inspections $21,675

Compare Aluminum Precision Products INC. vs Imerys Fused Minerals side-by-side →

What to do with this record

Use Aluminum Precision Products INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Aluminum Precision Products INC. against Imerys Fused Minerals, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Aluminum Precision Products INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Aluminum Precision Products INC. safe to work at? ▼
Based on OSHA records, Aluminum Precision Products INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 8 violations across 2 inspections, including 3 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Aluminum Precision Products INC. have? ▼
Aluminum Precision Products INC. has 8 OSHA violations on record, including 3 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $21,680.
How many OSHA inspections has Aluminum Precision Products INC. had? ▼
Aluminum Precision Products INC. has had 2 OSHA inspections, with the first recorded on 2017-03-29 and the most recent on 2019-08-14. This averages 4.0 violations per inspection.
What is the total penalty amount for Aluminum Precision Products INC.? ▼
Aluminum Precision Products INC. has been assessed $21,680 in current OSHA penalties, reduced from an initial assessment of $52,330 (a 58.6% reduction).
Does Aluminum Precision Products INC. have any serious or willful violations? ▼
Yes. Aluminum Precision Products INC. has 3 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Aluminum Precision Products INC. operate in? ▼
Aluminum Precision Products INC. operates in the Manufacturing sector (NAICS code 332313). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Aluminum Precision Products INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Aluminum Precision Products INC. ranks #15,965 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Aluminum Precision Products INC.'s safety record compare to industry average? ▼
Aluminum Precision Products INC.'s total OSHA penalty of $21,680 is above the Manufacturing industry average of $15,763 per employer (1.4x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Steel and Alloy Utility Products INC. in MC Donald, OH is a similar manufacturing employer with $21,684 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.