Manufacturing · Verona, PA

Aloma Shim and Manufacturing

According to OSHA enforcement records (2010–2026), Aloma Shim and Manufacturing ranks #18,116 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 12 violations across 3 inspections.

Top 25% by penalty83% serious
$19,500
OSHA penalties
12
Violations cited
3
OSHA inspections
#18,116
of 99,447 penalized employers

Aloma Shim and Manufacturing in Verona, PA has been the subject of 3 OSHA workplace inspections and 12 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $19,500. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Aloma Shim and Manufacturing 3 times over 5 years, roughly once every couple of years. These inspections resulted in 12 violations, averaging 4.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #18,116 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 10 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Hudson Valley Creamery, LLC in Hudson, NY is another manufacturing employer with 3 OSHA inspections on record and $19,500 in current penalties.

4.0
violations per inspection
83.3%
of violations were serious
#18,116
of 99,447 penalized employers

Compliance score

F 32/100
  • F OSHA safety compliance: 12 violations across 3 OSHA inspections (4.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Aloma Shim and Manufacturing compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Aloma Shim and Manufacturing runs moderately above peers (1.2x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$19,500 Bottom 18% least affordable more affordable than 18% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Aloma Shim and Manufacturing.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.02.311.420.529.638.6OSHA inspectionsViolations citedSAF-HOLLAND, INC., OSHA inspections: 3 · Violations cited: 30ELKHART PRODUCTS COR…, OSHA inspections: 3 · Violations cited: 10GENERAL EXTRUSIONS, …, OSHA inspections: 3 · Violations cited: 4BAY CITIES TIN SHOP,…, OSHA inspections: 3 · Violations cited: 19WESTLAKE VINYLS COMP…, OSHA inspections: 3 · Violations cited: 16TUSK HARDWOOD, LLC, OSHA inspections: 3 · Violations cited: 14JSW STEEL USA, INC., OSHA inspections: 3 · Violations cited: 4BEE LINE COMPANY, OSHA inspections: 3 · Violations cited: 14METAL MANUFACTURING …, OSHA inspections: 3 · Violations cited: 11YELLOW CREEK CASTING…, OSHA inspections: 3 · Violations cited: 19SOLESBEE'S EQUIPMENT…, OSHA inspections: 3 · Violations cited: 14ZENAR CORPORATION, OSHA inspections: 3 · Violations cited: 5COSMOS MANUFACTURING…, OSHA inspections: 3 · Violations cited: 13EAGLE MANUFACTURING …, OSHA inspections: 3 · Violations cited: 18NORSTAN, INC., OSHA inspections: 3 · Violations cited: 9MGM INDUSTRIES INCOR…, OSHA inspections: 3 · Violations cited: 37WOOTEN MACHINE COMPA…, OSHA inspections: 3 · Violations cited: 4VOSS MANUFACTURING, …, OSHA inspections: 3 · Violations cited: 9CHESAPEAKE SHIPBUILD…, OSHA inspections: 3 · Violations cited: 5THE MANISCHEWITZ COM…, OSHA inspections: 3 · Violations cited: 4Aloma Shim and Manuf…, OSHA inspections: 3 · Violations cited: 12
Aloma Shim and Manufacturing has 3 OSHA inspections on record and 12 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Aloma Shim and Manufacturing in the Manufacturing enforcement ledger

In Manufacturing, Aloma Shim and Manufacturing sits at penalty rank #8,740 of 35,243 penalized establishments ($19,500 assessed).

How Aloma Shim and Manufacturing Compares

Aloma Shim and Manufacturing's 4.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.2x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2013-07-24

Last Inspection

2018-07-26

Inspection Span

5 yrs

Violations / Inspection

4.0

Avg Penalty / Inspection

$6,500

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 5 years, averaging 4.0 violations per visit. That's $6,500 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

10

Serious

83.3% of total

0

Willful

0.0% of total

1

Repeat

8.3% of total

1

Other-Than-Serious

8.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$26,507

Current Penalty Amount

$19,500

Penalty Reduction

26.4%

What this shows Penalties were reduced by $7,007 from the initial assessment of $26,507. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Aloma Shim and Manufacturing compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Aloma Shim and Manufacturing Industry Avg
Inspections 3 2.6
Violations 12 8.0
Total Penalty $19,500 $15,763
Avg Penalty per Inspection $6,500 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Aloma Shim and Manufacturing, both outside PA so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Aloma Shim and Manufacturing vs Corporate Graphics INTL East Coast Div. side-by-side →

What to do with this record

Use Aloma Shim and Manufacturing's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Aloma Shim and Manufacturing against Corporate Graphics INTL East Coast Div., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Aloma Shim and Manufacturing's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Aloma Shim and Manufacturing safe to work at?
Based on OSHA records, Aloma Shim and Manufacturing's workplace safety record is concerning, with multiple serious compliance issues. The employer has 12 violations across 3 inspections, including 10 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Aloma Shim and Manufacturing have?
Aloma Shim and Manufacturing has 12 OSHA violations on record, including 10 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $19,500.
How many OSHA inspections has Aloma Shim and Manufacturing had?
Aloma Shim and Manufacturing has had 3 OSHA inspections, with the first recorded on 2013-07-24 and the most recent on 2018-07-26. This averages 4.0 violations per inspection.
What is the total penalty amount for Aloma Shim and Manufacturing?
Aloma Shim and Manufacturing has been assessed $19,500 in current OSHA penalties, reduced from an initial assessment of $26,507 (a 26.4% reduction).
Does Aloma Shim and Manufacturing have any serious or willful violations?
Yes. Aloma Shim and Manufacturing has 10 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Aloma Shim and Manufacturing operate in?
Aloma Shim and Manufacturing operates in the Manufacturing sector (NAICS code 332618). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Aloma Shim and Manufacturing rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Aloma Shim and Manufacturing ranks #18,116 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Aloma Shim and Manufacturing's safety record compare to industry average?
Aloma Shim and Manufacturing's total OSHA penalty of $19,500 is above the Manufacturing industry average of $15,763 per employer (1.2x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Hudson Valley Creamery, LLC in Hudson, NY is a similar manufacturing employer with $19,500 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.