PlainWorker
Employers › CA

Manufacturing · Compton, CA

Alloy Processing

According to OSHA enforcement records (2010–2026), Alloy Processing has a concerning safety record: 14 violations across 3 inspections. See the full breakdown below.

Upper half by penalty0% serious
$10,385
OSHA penalties
14
Violations cited
3
OSHA inspections
#34,148
of 100,495 penalized employers

Alloy Processing in Compton, CA has been the subject of 3 OSHA workplace inspections and 14 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $10,385. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Alloy Processing 3 times across a longer 7-year span, an infrequent cadence. These inspections resulted in 14 violations, averaging 4.7 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the upper half of penalized employers nationally. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Milan Lumber Company, LLC in Milan, NH is another manufacturing employer with 2 OSHA inspections on record and $10,385 in current penalties.

4.7
violations per inspection
0.0%
of violations were serious
66%
of penalized employers rank lower

How Alloy Processing compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Alloy Processing runs moderately below peers (0.7x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$10,385 Bottom 34% least affordable more affordable than 34% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Alloy Processing

The federal enforcement record for Alloy Processing in Compton, CA includes 3 OSHA inspections and 14 violations, translating to 4.67 violations per inspection. Of those violations, 0 (0.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat.

OSHA assessed $10,385 in initial penalties against this employer, later adjusted to a current total of $10,385 - no reduction from the original assessment. Average penalty per inspection works out to $3,462. Against the Manufacturing industry average of $15,410 per employer, this record runs moderately below peers (0.7x the sector average).

Inspection activity spans from 2014-04-10 to 2021-09-20, a window of roughly 7 years.

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2014-04-10

Last Inspection

2021-09-20

Inspection Span

7 yrs

Violations / Inspection

4.7

Avg Penalty / Inspection

$3,462

Industry Avg / Inspection

$6,092

What this shows 3 inspections over 7 years, averaging 4.7 violations per visit. That's $3,462 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

0

Serious

0.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

14

Other-Than-Serious

100.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$10,385

Current Penalty Amount

$10,385

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Alloy Processing compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Alloy Processing Industry Avg
Inspections 3 2.5
Violations 14 7.8
Total Penalty $10,385 $15,410
Avg Penalty per Inspection $3,462 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Contech Engineered Solutions, LLC
Montgomery, AL
4 inspections $10,385
Milan Lumber Company, LLC
Milan, NH
2 inspections $10,385
Package One, INC
Madera, CA
2 inspections $10,385
United Precast Industries LLC
Mount Vernon, OH
2 inspections $10,383
J. T. Cullen CO., INC.
Fulton, IL
3 inspections $10,387

Compare Alloy Processing vs Contech Engineered Solutions, LLC side-by-side →

Frequently Asked Questions

Is Alloy Processing safe to work at? ▼
Based on OSHA records, Alloy Processing's workplace safety record is concerning, with multiple serious compliance issues. The employer has 14 violations across 3 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Alloy Processing have? ▼
Alloy Processing has 14 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $10,385.
How many OSHA inspections has Alloy Processing had? ▼
Alloy Processing has had 3 OSHA inspections, with the first recorded on 2014-04-10 and the most recent on 2021-09-20. This averages 4.7 violations per inspection.
What is the total penalty amount for Alloy Processing? ▼
Alloy Processing has been assessed $10,385 in current OSHA penalties.
What industry does Alloy Processing operate in? ▼
Alloy Processing operates in the Manufacturing sector (NAICS code 332812). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Alloy Processing's safety record compare to industry average? ▼
Alloy Processing's total OSHA penalty of $10,385 is below the Manufacturing industry average of $15,410 per employer. The employer has 3 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Milan Lumber Company, LLC in Milan, NH is a similar manufacturing employer with $10,385 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in CA

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Alloy Processing's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.