PlainWorker
Employers › OH

Manufacturing · Toledo, OH

Allied Mask & Tooling, INC.

According to OSHA enforcement records (2010–2026), Allied Mask & Tooling, INC. ranks #15,530 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 19 violations across 2 inspections.

Top 25% by penalty89% serious
$22,173
OSHA penalties
19
Violations cited
2
OSHA inspections
#15,530
of 99,447 penalized employers

Allied Mask & Tooling, INC. in Toledo, OH has been the subject of 2 OSHA workplace inspections and 19 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $22,173. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Allied Mask & Tooling, INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 19 violations, averaging 9.5 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #15,530 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 17 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Hanon Systems USA, LLC in Carey, OH is another manufacturing employer with 2 OSHA inspections on record and $22,176 in current penalties.

9.5
violations per inspection
89.5%
of violations were serious
#15,530
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 19 violations across 2 OSHA inspections (9.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Allied Mask & Tooling, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Allied Mask & Tooling, INC. runs moderately above peers (1.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$22,173 Bottom 16% least affordable more affordable than 16% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Allied Mask & Tooling, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.58.81725.333.5OSHA inspectionsViolations citedANHEUSER-BUSCH, INC., OSHA inspections: 2 · Violations cited: 8RED HEN BREAD LLC, OSHA inspections: 2 · Violations cited: 11AVEKA NUTRA PROCESSING, OSHA inspections: 2 · Violations cited: 9A&E CLEANING AND GRI…, OSHA inspections: 2 · Violations cited: 21CYTEC INDUSTRIES, INC., OSHA inspections: 2 · Violations cited: 32PEPSI BEVERAGES COM…, OSHA inspections: 2 · Violations cited: 8NUTRIEN AG SOLUTIONS, OSHA inspections: 2 · Violations cited: 3CONSTRUCTION SPECIAL…, OSHA inspections: 2 · Violations cited: 9TARAZI SPECIALTY FOO…, OSHA inspections: 2 · Violations cited: 5BRADY ENTERPRISES, I…, OSHA inspections: 2 · Violations cited: 6OLM FOOD SOLUTIONS (…, OSHA inspections: 2 · Violations cited: 4SUNSHINE MINTING NEV…, OSHA inspections: 2 · Violations cited: 2METROCK STEEL & WIRE…, OSHA inspections: 2 · Violations cited: 16PIKE FEEDS, INC, OSHA inspections: 2 · Violations cited: 15ROGER WOOD FOODS, OSHA inspections: 2 · Violations cited: 20MAPLE ISLAND, INC., OSHA inspections: 2 · Violations cited: 29AUTOLIV ASP, INC.-PRO, OSHA inspections: 2 · Violations cited: 5BYRNES & KIEFER COMP…, OSHA inspections: 2 · Violations cited: 4MASTERBLEND INTERNAT…, OSHA inspections: 2 · Violations cited: 11WESTERN INTERNATIONA…, OSHA inspections: 2 · Violations cited: 6Allied Mask & Toolin…, OSHA inspections: 2 · Violations cited: 19
Allied Mask & Tooling, INC. has 2 OSHA inspections on record and 19 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Allied Mask & Tooling, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Allied Mask & Tooling, INC. is the #7,569 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($22,173).

How Allied Mask & Tooling, INC. Compares

Allied Mask & Tooling, INC.'s 9.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2018-01-18

Last Inspection

2018-01-18

Inspection Span

1 yr

Violations / Inspection

9.5

Avg Penalty / Inspection

$11,087

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 9.5 violations per visit. That's $11,087 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

17

Serious

89.5% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

10.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$22,173

Current Penalty Amount

$22,173

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Allied Mask & Tooling, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Allied Mask & Tooling, INC. Industry Avg
Inspections 2 2.6
Violations 19 8.0
Total Penalty $22,173 $15,763
Avg Penalty per Inspection $11,087 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Allied Mask & Tooling, INC., both outside OH so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($22,173 here).

Missouri Metals $22,173 MO Sportsplay Equipment INC. $22,172 MO Bottling Group, LLC $22,172 TX Fab-Tek of Central Mississippi, INC. $22,176 MS

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Anheuser-Busch, INC. 2 insp. Houston, TX Red Hen Bread LLC 2 insp. Elmhurst, IL Aveka Nutra Processing 2 insp. Waukon, IA A&E Cleaning and Grinding, INC. 2 insp. Oak Creek, WI

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Missouri Metals
Saint Louis, MO
4 inspections $22,173
Sportsplay Equipment INC.
Park Hills, MO
3 inspections $22,172
Bottling Group, LLC
San Antonio, TX
2 inspections $22,172
Hanon Systems USA, LLC
Carey, OH
2 inspections $22,176
Fab-Tek of Central Mississippi, INC.
Hazlehurst, MS
2 inspections $22,176

Compare Allied Mask & Tooling, INC. vs Missouri Metals side-by-side →

What to do with this record

Use Allied Mask & Tooling, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Allied Mask & Tooling, INC. against Missouri Metals, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Allied Mask & Tooling, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Allied Mask & Tooling, INC. safe to work at? ▼
Based on OSHA records, Allied Mask & Tooling, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 19 violations across 2 inspections, including 17 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Allied Mask & Tooling, INC. have? ▼
Allied Mask & Tooling, INC. has 19 OSHA violations on record, including 17 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $22,173.
How many OSHA inspections has Allied Mask & Tooling, INC. had? ▼
Allied Mask & Tooling, INC. has had 2 OSHA inspections, with the first recorded on 2018-01-18 and the most recent on 2018-01-18. This averages 9.5 violations per inspection.
What is the total penalty amount for Allied Mask & Tooling, INC.? ▼
Allied Mask & Tooling, INC. has been assessed $22,173 in current OSHA penalties.
Does Allied Mask & Tooling, INC. have any serious or willful violations? ▼
Yes. Allied Mask & Tooling, INC. has 17 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Allied Mask & Tooling, INC. operate in? ▼
Allied Mask & Tooling, INC. operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Allied Mask & Tooling, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Allied Mask & Tooling, INC. ranks #15,530 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Allied Mask & Tooling, INC.'s safety record compare to industry average? ▼
Allied Mask & Tooling, INC.'s total OSHA penalty of $22,173 is above the Manufacturing industry average of $15,763 per employer (1.4x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Hanon Systems USA, LLC in Carey, OH is a similar manufacturing employer with $22,176 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.