ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS

25201 E. HIGHWAY 78, INDEPENDENCE, MO 64056 · Manufacturing

ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS in INDEPENDENCE, MO has been the subject of 2 OSHA workplace inspections and 7 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $34,350. Industry sector: Manufacturing. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

2
OSHA Inspections
7
Violations Cited
$34,350
OSHA Penalties

Safety Assessment

ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS has been inspected 2 times by OSHA over 1 year. These inspections resulted in 7 violations, averaging 3.5 violations per inspection. Of these, 7 were classified as serious — indicating hazards that could cause death or serious harm. Compared to the Manufacturing industry average of 3 inspections per employer, ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS has been inspected fewer frequently.

What the Data Says About ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS

The federal enforcement record for ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS in INDEPENDENCE, MO includes 2 OSHA inspections and 7 violations, translating to 3.50 violations per inspection. Of those violations, 7 (100.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $35,750 in initial penalties against this employer, later adjusted to a current total of $34,350 — a 3.9% reduction. Average penalty per inspection works out to $17,175. Against the Manufacturing industry average of $13,853 per employer, this record runs above peers.

Inspection activity spans from 2011-03-02 to 2011-03-17, a window of roughly 1 year. This record draws directly from the U.S. Department of Labor's public enforcement data at data.dol.gov. Penalty amounts reflect final adjudicated figures after any settlement, informal conference, or formal contest. Workers, journalists, and researchers can use these figures to compare this employer's compliance posture against industry peers and to identify workplaces with elevated safety risks or repeat non-compliance.

OSHA Inspection History

Total Inspections
2
First Inspection
2011-03-02
Last Inspection
2011-03-17
Inspection Span
1 year
Violations per Inspection
3.5
Avg Penalty per Inspection
$17,175
Industry Avg per Inspection
$5,418

Violation Breakdown

7
Serious
100.0% of total
0
Willful
0.0% of total
0
Repeat
0.0% of total
0
Other-Than-Serious
0.0% of total

Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Penalty Analysis

Initial Penalty Assessed
$35,750
Current Penalty Amount
$34,350
Penalty Reduction
3.9%

Penalties were reduced by $1,400 from the initial assessment of $35,750. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS compares to the Manufacturing sector, which has 23,042 employers tracked by PlainWorker.

Metric ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS Industry Avg
Inspections 2 2.6
Violations 7 8.2
Total Penalty $34,350 $13,853
Avg Penalty per Inspection $17,175 $5,418

Related Data from Other Sources

Workplace Safety Guides

Nearby & Similar Employers in Manufacturing

Compare ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS vs DAEHAN SOLUTION NEVADA, LLC. side-by-side →

Frequently Asked Questions

Is ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS safe to work at?
Based on OSHA records, ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS's workplace safety record is concerning, with multiple serious compliance issues. The employer has 7 violations across 2 inspections, including 7 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS have?
ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS has 7 OSHA violations on record, including 7 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $34,350.
How many OSHA inspections has ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS had?
ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS has had 2 OSHA inspections, with the first recorded on 2011-03-02 and the most recent on 2011-03-17. This averages 3.5 violations per inspection.
What is the total penalty amount for ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS?
ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS has been assessed $34,350 in current OSHA penalties, reduced from an initial assessment of $35,750 (a 3.9% reduction).
Does ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS have any serious or willful violations?
Yes. ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS has 7 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS operate in?
ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS operates in the Manufacturing sector (NAICS code 332992). This industry has 23,042 employers tracked by PlainWorker, with 58,916 total OSHA inspections and $319.21M in cumulative penalties.
What are my rights if I work at ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS?
Under the Occupational Safety and Health Act, employees at ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS have the right to a safe workplace, the right to report hazards without retaliation, the right to request an OSHA inspection, and the right to access their own exposure and medical records. Workers can also refuse dangerous work if they believe they face imminent danger and their employer has failed to address the hazard.
How do I file an OSHA complaint against ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS?
You can file a complaint with OSHA online at osha.gov/workers/file-complaint, by calling 1-800-321-OSHA (6742), or by visiting your local OSHA area office. Complaints can be filed confidentially. OSHA is required to respond to all complaints and will prioritize those alleging imminent danger. You are protected from employer retaliation under Section 11(c) of the OSH Act.
How does ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS's safety record compare to industry average?
ALLIANT TECHSYSTEMS INC/DBA ATA AMMUNITION SYSTEMS's total OSHA penalty of $34,350 is above the Manufacturing industry average of $13,853 per employer (2.5x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer.

Explore PlainWorker

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with BLS →