Manufacturing · Roscoe, TX

Allen Machine & Equipment

According to OSHA enforcement records (2010–2026), Allen Machine & Equipment ranks #50,303 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 4 violations across 2 inspections.

Lower half by penalty75% serious
$6,000
OSHA penalties
4
Violations cited
2
OSHA inspections
#50,303
of 99,447 penalized employers

Allen Machine & Equipment in Roscoe, TX has been the subject of 2 OSHA workplace inspections and 4 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $6,000. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Allen Machine & Equipment 2 times over 1 year - more than twice a year on average. These inspections resulted in 4 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #50,303 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Atomatic Manufacturing CO. in East Pittsburgh, PA is another manufacturing employer with 2 OSHA inspections on record and $6,000 in current penalties.

2.0
violations per inspection
75.0%
of violations were serious
#50,303
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 4 violations across 2 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Allen Machine & Equipment compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Allen Machine & Equipment runs moderately below peers (0.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$6,000 Top 49% most affordable more affordable than 51% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Allen Machine & Equipment.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.01.59.81826.334.5OSHA inspectionsViolations citedKRISPY KREME DOUGHNU…, OSHA inspections: 2 · Violations cited: 16HORN PACKAGING CORPO…, OSHA inspections: 2 · Violations cited: 21METAL CULVERTS, INC., OSHA inspections: 2 · Violations cited: 9HAILO WIND SYSTEMS, …, OSHA inspections: 2 · Violations cited: 15BAKER MANUFACTURING …, OSHA inspections: 2 · Violations cited: 14NEFAB PACKAGING WEST…, OSHA inspections: 2 · Violations cited: 4CLEVELAND TRACK MATE…, OSHA inspections: 2 · Violations cited: 8PACKAGING CORPORATIO…, OSHA inspections: 2 · Violations cited: 5FLORIKAN ESA, LLC, OSHA inspections: 2 · Violations cited: 27RANDALL FOODS, INC., OSHA inspections: 2 · Violations cited: 9US COSMETICS CORPORA…, OSHA inspections: 2 · Violations cited: 33CHEP SERVICES, LLC, OSHA inspections: 2 · Violations cited: 4JOE N. MILES & SONS,…, OSHA inspections: 2 · Violations cited: 26CULPEPER FARMERS' CO…, OSHA inspections: 2 · Violations cited: 8ENSIGHT SOLUTIONS LLC, OSHA inspections: 2 · Violations cited: 12INTERPRESS TECHNOLOG…, OSHA inspections: 2 · Violations cited: 4BARDANE MFG. CO., OSHA inspections: 2 · Violations cited: 15LEONI WIRE, INC., OSHA inspections: 2 · Violations cited: 6FLOW TURN, INC., OSHA inspections: 2 · Violations cited: 3BLAIR CEDAR & NOVELT…, OSHA inspections: 2 · Violations cited: 10Allen Machine & Equi…, OSHA inspections: 2 · Violations cited: 4
Allen Machine & Equipment has 2 OSHA inspections on record and 4 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Allen Machine & Equipment in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Allen Machine & Equipment ranks #21,311 at $6,000 current penalty.

How Allen Machine & Equipment Compares

Allen Machine & Equipment's 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2021-03-15

Last Inspection

2022-05-12

Inspection Span

1 yr

Violations / Inspection

2.0

Avg Penalty / Inspection

$3,000

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 2.0 violations per visit. That's $3,000 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

3

Serious

75.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

25.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$8,606

Current Penalty Amount

$6,000

Penalty Reduction

30.3%

What this shows Penalties were reduced by $2,606 from the initial assessment of $8,606. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Allen Machine & Equipment compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Allen Machine & Equipment Industry Avg
Inspections 2 2.6
Violations 4 8.0
Total Penalty $6,000 $15,763
Avg Penalty per Inspection $3,000 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Allen Machine & Equipment, both outside TX so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($6,000 here).

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Allen Machine & Equipment vs PNY Technologies, INC. side-by-side →

What to do with this record

Use Allen Machine & Equipment's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Allen Machine & Equipment against PNY Technologies, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Allen Machine & Equipment's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Allen Machine & Equipment safe to work at?
Based on OSHA records, Allen Machine & Equipment's workplace safety record is mixed, with some compliance concerns. The employer has 4 violations across 2 inspections, including 3 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Allen Machine & Equipment have?
Allen Machine & Equipment has 4 OSHA violations on record, including 3 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $6,000.
How many OSHA inspections has Allen Machine & Equipment had?
Allen Machine & Equipment has had 2 OSHA inspections, with the first recorded on 2021-03-15 and the most recent on 2022-05-12. This averages 2.0 violations per inspection.
What is the total penalty amount for Allen Machine & Equipment?
Allen Machine & Equipment has been assessed $6,000 in current OSHA penalties, reduced from an initial assessment of $8,606 (a 30.3% reduction).
Does Allen Machine & Equipment have any serious or willful violations?
Yes. Allen Machine & Equipment has 3 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Allen Machine & Equipment operate in?
Allen Machine & Equipment operates in the Manufacturing sector (NAICS code 332710). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Allen Machine & Equipment rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Allen Machine & Equipment ranks #50,303 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Allen Machine & Equipment's safety record compare to industry average?
Allen Machine & Equipment's total OSHA penalty of $6,000 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Atomatic Manufacturing CO. in East Pittsburgh, PA is a similar manufacturing employer with $6,000 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.