PlainWorker
Employers › AL

Manufacturing · Woodville, AL

Alabama Engineering & Precision Manufacturing LLC

According to OSHA enforcement records (2010–2026), Alabama Engineering & Precision Manufacturing LLC ranks #43,530 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 5 violations across 4 inspections.

Upper half by penalty60% serious
$7,500
OSHA penalties
5
Violations cited
4
OSHA inspections
#43,530
of 99,447 penalized employers

Alabama Engineering & Precision Manufacturing LLC in Woodville, AL has been the subject of 4 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $7,500. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Alabama Engineering & Precision Manufacturing LLC 4 times over 3 years, roughly annually. These inspections resulted in 5 violations, averaging 1.3 per inspection. According to OSHA enforcement records, its total current penalty ranks #43,530 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Turner Tool and Die, INC. in Lake Winola, PA is another manufacturing employer with 2 OSHA inspections on record and $7,500 in current penalties.

1.3
violations per inspection
60.0%
of violations were serious
#43,530
of 99,447 penalized employers

Compliance score

C 72/100
  • C OSHA safety compliance: 5 violations across 4 OSHA inspections (1.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Alabama Engineering & Precision Manufacturing LLC runs moderately below peers (0.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$7,500 Bottom 44% least affordable more affordable than 44% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Alabama Engineering & Precision Manufacturing LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.00.39.919.529.138.8OSHA inspectionsViolations citedLAKEVIEW FARMS, LLC, OSHA inspections: 4 · Violations cited: 15MISSISSIPPI POLYMERS…, OSHA inspections: 4 · Violations cited: 19MIDWEST FASTENERS, I…, OSHA inspections: 4 · Violations cited: 15SUNFOODS, LLC, OSHA inspections: 4 · Violations cited: 8GEFCO INC., OSHA inspections: 4 · Violations cited: 5GENESIS HOSPITALITY …, OSHA inspections: 4 · Violations cited: 37RONTEX AMERICA INC., OSHA inspections: 4 · Violations cited: 14PTM CORP, OSHA inspections: 4 · Violations cited: 27OKLAHOMA FORGE, INC., OSHA inspections: 4 · Violations cited: 2MONROE TRUCK EQUIPME…, OSHA inspections: 4 · Violations cited: 4CAPITOL CONCRETE PRO…, OSHA inspections: 4 · Violations cited: 26PRATT INDUSTRIES INC, OSHA inspections: 4 · Violations cited: 12BRISTOL ALUMINUM COM…, OSHA inspections: 4 · Violations cited: 9URETEK LLC, OSHA inspections: 4 · Violations cited: 9CLM PALLET RECYCLING, OSHA inspections: 4 · Violations cited: 3SJC HOLDINGS, INC., OSHA inspections: 4 · Violations cited: 9NORTHLAND FILTER INT…, OSHA inspections: 4 · Violations cited: 13APOLLO AEROSOL INDUS…, OSHA inspections: 4 · Violations cited: 5TYSON POULTRY, INC., OSHA inspections: 4 · Violations cited: 2ABSOPURE WATER, OSHA inspections: 4 · Violations cited: 4Alabama Engineering …, OSHA inspections: 4 · Violations cited: 5
Alabama Engineering & Precision Manufacturing LLC has 4 OSHA inspections on record and 5 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Alabama Engineering & Precision Manufacturing LLC in the Manufacturing enforcement ledger

Manufacturing sector: Alabama Engineering & Precision Manufacturing LLC is the #18,906 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($7,500).

How Alabama Engineering & Precision Manufacturing LLC Compares

Alabama Engineering & Precision Manufacturing LLC's 1.25 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.5x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2019-08-05

Last Inspection

2022-04-13

Inspection Span

3 yrs

Violations / Inspection

1.3

Avg Penalty / Inspection

$1,875

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 3 years, averaging 1.3 violations per visit. That's $1,875 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

3

Serious

60.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

40.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$14,396

Current Penalty Amount

$7,500

Penalty Reduction

47.9%

What this shows Penalties were reduced by $6,896 from the initial assessment of $14,396. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Alabama Engineering & Precision Manufacturing LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Alabama Engineering & Precision Manufacturing LLC Industry Avg
Inspections 4 2.6
Violations 5 8.0
Total Penalty $7,500 $15,763
Avg Penalty per Inspection $1,875 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Alabama Engineering & Precision Manufacturing LLC, both outside AL so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($7,500 here).

McRae Imaging CORP $7,500 MI Production Components Corporation $7,500 PA Captiva Group, LLC $7,500 TX Eftec North America LLC $7,500 MI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

Lakeview Farms, LLC 4 insp. Delphos, OH Mississippi Polymers, INC. 4 insp. Corinth, MS Midwest Fasteners, INC. 4 insp. Miamisburg, OH Sunfoods, LLC 4 insp. Woodland, CA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

McRae Imaging CORP
Rochester Hills, MI
2 inspections $7,500
Ribbon Webbing Corporation
Chicago, IL
2 inspections $7,500
Turner Tool and Die, INC.
Lake Winola, PA
2 inspections $7,500
A.F.W. Foundry, INC.
Lannon, WI
2 inspections $7,500
Dougherty Enterprises, INC.
Woodstock, IL
2 inspections $7,500

Compare Alabama Engineering & Precision Manufacturing LLC vs McRae Imaging CORP side-by-side →

What to do with this record

Use Alabama Engineering & Precision Manufacturing LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Alabama Engineering & Precision Manufacturing LLC against McRae Imaging CORP, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Alabama Engineering & Precision Manufacturing LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Alabama Engineering & Precision Manufacturing LLC safe to work at? ▼
Based on OSHA records, Alabama Engineering & Precision Manufacturing LLC's workplace safety record is mixed, with some compliance concerns. The employer has 5 violations across 4 inspections, including 3 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Alabama Engineering & Precision Manufacturing LLC have? ▼
Alabama Engineering & Precision Manufacturing LLC has 5 OSHA violations on record, including 3 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $7,500.
How many OSHA inspections has Alabama Engineering & Precision Manufacturing LLC had? ▼
Alabama Engineering & Precision Manufacturing LLC has had 4 OSHA inspections, with the first recorded on 2019-08-05 and the most recent on 2022-04-13. This averages 1.3 violations per inspection.
What is the total penalty amount for Alabama Engineering & Precision Manufacturing LLC? ▼
Alabama Engineering & Precision Manufacturing LLC has been assessed $7,500 in current OSHA penalties, reduced from an initial assessment of $14,396 (a 47.9% reduction).
Does Alabama Engineering & Precision Manufacturing LLC have any serious or willful violations? ▼
Yes. Alabama Engineering & Precision Manufacturing LLC has 3 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Alabama Engineering & Precision Manufacturing LLC operate in? ▼
Alabama Engineering & Precision Manufacturing LLC operates in the Manufacturing sector (NAICS code 332721). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Alabama Engineering & Precision Manufacturing LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Alabama Engineering & Precision Manufacturing LLC ranks #43,530 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Alabama Engineering & Precision Manufacturing LLC's safety record compare to industry average? ▼
Alabama Engineering & Precision Manufacturing LLC's total OSHA penalty of $7,500 is below the Manufacturing industry average of $15,763 per employer. The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Turner Tool and Die, INC. in Lake Winola, PA is a similar manufacturing employer with $7,500 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.