Manufacturing · Omaha, NE

Airlite Plastics Company

According to OSHA enforcement records (2010–2026), Airlite Plastics Company has a mixed safety record: 12 violations across 10 inspections. See the full breakdown below.

Top 25% by penalty58% serious
$29,800
OSHA penalties
12
Violations cited
10
OSHA inspections
#10,641
of 100,495 penalized employers

Airlite Plastics Company in Omaha, NE has been the subject of 10 OSHA workplace inspections and 12 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $29,800. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Airlite Plastics Company 10 times over 12 years, roughly once every couple of years. These inspections resulted in 12 violations, averaging 1.2 per inspection. Its total OSHA penalty ranks in the top quarter of penalized employers nationally. Of these, 7 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs well above peers (4.0x the sector average) on inspection frequency. For comparison, Cummings Resources, LLC in Dothan, AL is another manufacturing employer with 3 OSHA inspections on record and $29,800 in current penalties.

1.2
violations per inspection
58.3%
of violations were serious
89%
of penalized employers rank lower

How Airlite Plastics Company compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Airlite Plastics Company runs moderately above peers (1.9x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$29,800 Bottom 11% least affordable more affordable than 11% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). This entry sits in this band. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Airlite Plastics Company

The federal enforcement record for Airlite Plastics Company in Omaha, NE includes 10 OSHA inspections and 12 violations, translating to 1.20 violations per inspection. Of those violations, 7 (58.3%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $76,776 in initial penalties against this employer, later adjusted to a current total of $29,800 - a 61.2% reduction. Average penalty per inspection works out to $2,980. Against the Manufacturing industry average of $15,410 per employer, this record runs moderately above peers (1.9x the sector average).

Inspection activity spans from 2012-04-11 to 2024-07-31, a window of roughly 12 years.

Enforcement detail

OSHA Inspection History

Total Inspections

10

First Inspection

2012-04-11

Last Inspection

2024-07-31

Inspection Span

12 yrs

Violations / Inspection

1.2

Avg Penalty / Inspection

$2,980

Industry Avg / Inspection

$6,092

What this shows 10 inspections over 12 years, averaging 1.2 violations per visit. That's $2,980 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

7

Serious

58.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

41.7% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$76,776

Current Penalty Amount

$29,800

Penalty Reduction

61.2%

What this shows Penalties were reduced by $46,976 from the initial assessment of $76,776. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Airlite Plastics Company compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Airlite Plastics Company Industry Avg
Inspections 10 2.5
Violations 12 7.8
Total Penalty $29,800 $15,410
Avg Penalty per Inspection $2,980 $6,092

Nearby & Similar Employers in Manufacturing

Compare Airlite Plastics Company vs Acorn Manufacturing CO., INC. side-by-side →

Frequently Asked Questions

Is Airlite Plastics Company safe to work at?
Based on OSHA records, Airlite Plastics Company's workplace safety record is mixed, with some compliance concerns. The employer has 12 violations across 10 inspections, including 7 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Airlite Plastics Company have?
Airlite Plastics Company has 12 OSHA violations on record, including 7 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $29,800.
How many OSHA inspections has Airlite Plastics Company had?
Airlite Plastics Company has had 10 OSHA inspections, with the first recorded on 2012-04-11 and the most recent on 2024-07-31. This averages 1.2 violations per inspection.
What is the total penalty amount for Airlite Plastics Company?
Airlite Plastics Company has been assessed $29,800 in current OSHA penalties, reduced from an initial assessment of $76,776 (a 61.2% reduction).
Does Airlite Plastics Company have any serious or willful violations?
Yes. Airlite Plastics Company has 7 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Airlite Plastics Company operate in?
Airlite Plastics Company operates in the Manufacturing sector (NAICS code 326199). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Airlite Plastics Company's safety record compare to industry average?
Airlite Plastics Company's total OSHA penalty of $29,800 is above the Manufacturing industry average of $15,410 per employer (1.9x the average). The employer has 10 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Cummings Resources, LLC in Dothan, AL is a similar manufacturing employer with $29,800 in current penalties.

Explore PlainWorker

What to check next

Airlite Plastics Company's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 10 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.