PlainWorker
Employers › MI

Manufacturing · Battle Creek, MI

Advantage Sintered Metals INC

According to OSHA enforcement records (2010–2026), Advantage Sintered Metals INC ranks #21,492 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 21 violations across 6 inspections.

Top 25% by penalty57% serious
$16,700
OSHA penalties
21
Violations cited
6
OSHA inspections
#21,492
of 99,447 penalized employers

Advantage Sintered Metals INC in Battle Creek, MI has been the subject of 6 OSHA workplace inspections and 21 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $16,700. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Advantage Sintered Metals INC 6 times over 12 years, roughly once every couple of years. These inspections resulted in 21 violations, averaging 3.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #21,492 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 12 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs well above peers (2.3x the sector average) on inspection frequency. For comparison, Hickman Lumber Company in Emlenton, PA is another manufacturing employer with 3 OSHA inspections on record and $16,700 in current penalties.

3.5
violations per inspection
57.1%
of violations were serious
#21,492
of 99,447 penalized employers

Compliance score

F 39/100
  • F OSHA safety compliance: 21 violations across 6 OSHA inspections (3.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Advantage Sintered Metals INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Advantage Sintered Metals INC sits roughly in line with peers (1.1x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$16,700 Bottom 22% least affordable more affordable than 22% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Advantage Sintered Metals INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both6.06.066.06.0013.927.841.755.6OSHA inspectionsViolations citedBARON HR, OSHA inspections: 6 · Violations cited: 19BOTTLING GROUP, LLC, OSHA inspections: 6 · Violations cited: 17GENERAL MILLS, OSHA inspections: 6 · Violations cited: 7CDS MANUFACTURING, I…, OSHA inspections: 6 · Violations cited: 17BISMARCK STEEL LLC, OSHA inspections: 6 · Violations cited: 6PRETIUM PACKAGING LLC, OSHA inspections: 6 · Violations cited: 9PALLET BROKER LLC, OSHA inspections: 6 · Violations cited: 18BAJA DESIGN, INC., OSHA inspections: 6 · Violations cited: 45HOBBS BONDED FIBERS …, OSHA inspections: 6 · Violations cited: 53ANOMATIC CORPORATION, OSHA inspections: 6 · Violations cited: 8AEROJET ROCKETDYNE, …, OSHA inspections: 6 · Violations cited: 11WEBCO CHEMICAL CORPO…, OSHA inspections: 6 · Violations cited: 12LARK UNITED MANUFACT…, OSHA inspections: 6 · Violations cited: 28CHS ACQUISITION CORP., OSHA inspections: 6 · Violations cited: 10BAKERSFIELD RENEWABL…, OSHA inspections: 6 · Violations cited: 12SMITHFIELD PACKAGED …, OSHA inspections: 6 · Violations cited: 0BROWNING'S METAL FIN…, OSHA inspections: 6 · Violations cited: 27VALK MANUFACTURING C…, OSHA inspections: 6 · Violations cited: 11PACKAGING CORPORATIO…, OSHA inspections: 6 · Violations cited: 18CROWN PLASTICS, OSHA inspections: 6 · Violations cited: 15Advantage Sintered M…, OSHA inspections: 6 · Violations cited: 21
Advantage Sintered Metals INC has 6 OSHA inspections on record and 21 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Advantage Sintered Metals INC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Advantage Sintered Metals INC ranks #10,242 at $16,700 current penalty.

How Advantage Sintered Metals INC Compares

Advantage Sintered Metals INC's 3.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.1x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

6

First Inspection

2012-10-17

Last Inspection

2024-07-24

Inspection Span

12 yrs

Violations / Inspection

3.5

Avg Penalty / Inspection

$2,783

Industry Avg / Inspection

$6,093

What this shows 6 inspections over 12 years, averaging 3.5 violations per visit. That's $2,783 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

12

Serious

57.1% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

9

Other-Than-Serious

42.9% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$33,400

Current Penalty Amount

$16,700

Penalty Reduction

50.0%

What this shows Penalties were reduced by $16,700 from the initial assessment of $33,400. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Advantage Sintered Metals INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Advantage Sintered Metals INC Industry Avg
Inspections 6 2.6
Violations 21 8.0
Total Penalty $16,700 $15,763
Avg Penalty per Inspection $2,783 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Advantage Sintered Metals INC, both outside MI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($16,700 here).

Hickman Lumber Company $16,700 PA Freeman Signs, INC. $16,700 CO Imperial Manufacturing Group USA INC. $16,701 IL Rio Stone Group, LLC $16,705 AL

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (6 inspections here).

Baron HR 6 insp. Los Angeles, CA Bottling Group, LLC 6 insp. Tampa, FL General Mills 6 insp. Wellston, OH CDS Manufacturing, INC. 6 insp. Gretna, FL

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Hickman Lumber Company
Emlenton, PA
3 inspections $16,700
Freeman Signs, INC.
Denver, CO
2 inspections $16,700
Hudson Drugs
Cresskill, NJ
0 inspections $0
Imperial Manufacturing Group USA INC.
Alton, IL
5 inspections $16,701
Rio Stone Group, LLC
Alabaster, AL
2 inspections $16,705

Compare Advantage Sintered Metals INC vs Hickman Lumber Company side-by-side →

What to do with this record

Use Advantage Sintered Metals INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Advantage Sintered Metals INC against Hickman Lumber Company, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Advantage Sintered Metals INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Advantage Sintered Metals INC safe to work at? ▼
Based on OSHA records, Advantage Sintered Metals INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 21 violations across 6 inspections, including 12 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Advantage Sintered Metals INC have? ▼
Advantage Sintered Metals INC has 21 OSHA violations on record, including 12 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $16,700.
How many OSHA inspections has Advantage Sintered Metals INC had? ▼
Advantage Sintered Metals INC has had 6 OSHA inspections, with the first recorded on 2012-10-17 and the most recent on 2024-07-24. This averages 3.5 violations per inspection.
What is the total penalty amount for Advantage Sintered Metals INC? ▼
Advantage Sintered Metals INC has been assessed $16,700 in current OSHA penalties, reduced from an initial assessment of $33,400 (a 50.0% reduction).
Does Advantage Sintered Metals INC have any serious or willful violations? ▼
Yes. Advantage Sintered Metals INC has 12 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Advantage Sintered Metals INC operate in? ▼
Advantage Sintered Metals INC operates in the Manufacturing sector (NAICS code 331221). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Advantage Sintered Metals INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Advantage Sintered Metals INC ranks #21,492 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Advantage Sintered Metals INC's safety record compare to industry average? ▼
Advantage Sintered Metals INC's total OSHA penalty of $16,700 is above the Manufacturing industry average of $15,763 per employer (1.1x the average). The employer has 6 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Hickman Lumber Company in Emlenton, PA is a similar manufacturing employer with $16,700 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 6 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.