PlainWorker
Employers › KS

Manufacturing · Spring Hill, KS

Advantage Component Systems, INC.

According to OSHA enforcement records (2010–2026), Advantage Component Systems, INC. ranks #63,742 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 4 violations across 2 inspections.

Lower half by penalty100% serious
$3,625
OSHA penalties
4
Violations cited
2
OSHA inspections
#63,742
of 99,447 penalized employers

Advantage Component Systems, INC. in Spring Hill, KS has been the subject of 2 OSHA workplace inspections and 4 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $3,625. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Advantage Component Systems, INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 4 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #63,742 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 4 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Cornerstone Composites, INC. in Milwaukee, WI is another manufacturing employer with 2 OSHA inspections on record and $3,625 in current penalties.

2.0
violations per inspection
100.0%
of violations were serious
#63,742
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 4 violations across 2 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Advantage Component Systems, INC. runs well below peers (0.23x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$3,625 Top 36% most affordable more affordable than 64% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Advantage Component Systems, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.02.311.420.529.638.6OSHA inspectionsViolations citedFIRST MARINE, LLC, A…, OSHA inspections: 2 · Violations cited: 35SOUTH MARINE SYSTEMS…, OSHA inspections: 2 · Violations cited: 20WOODGRAIN MILLWORK, …, OSHA inspections: 2 · Violations cited: 9GREAT DANE - WAYNE P…, OSHA inspections: 2 · Violations cited: 18TWINCRAFT INC., OSHA inspections: 2 · Violations cited: 13ANDOVER HEALTHCARE, …, OSHA inspections: 2 · Violations cited: 14DELEK REFINING, LTD, OSHA inspections: 2 · Violations cited: 8CHERRY CRUSHED CONCR…, OSHA inspections: 2 · Violations cited: 10PIONEER TOOL & DIE CO., OSHA inspections: 2 · Violations cited: 13EVERLASTING SURFACES…, OSHA inspections: 2 · Violations cited: 18BAUER, INC., OSHA inspections: 2 · Violations cited: 24CASSANO MARBLE INC., OSHA inspections: 2 · Violations cited: 15OWENS-BROCKWAY GLASS…, OSHA inspections: 2 · Violations cited: 7TRACHTE SOUTHEAST LLC, OSHA inspections: 2 · Violations cited: 28FCA LLC, OSHA inspections: 2 · Violations cited: 8POLYCHEM OMS SYSTEMS…, OSHA inspections: 2 · Violations cited: 37SMURFIT STONE RECYCL…, OSHA inspections: 2 · Violations cited: 22PROTEIN FOR PETS OPC…, OSHA inspections: 2 · Violations cited: 18BECKER WORKS, LTD., OSHA inspections: 2 · Violations cited: 26HOME PRIDE INC., OSHA inspections: 2 · Violations cited: 17Advantage Component …, OSHA inspections: 2 · Violations cited: 4
Advantage Component Systems, INC. has 2 OSHA inspections on record and 4 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Advantage Component Systems, INC. in the Manufacturing enforcement ledger

In Manufacturing, Advantage Component Systems, INC. sits at penalty rank #25,873 of 35,243 penalized establishments ($3,625 assessed).

How Advantage Component Systems, INC. Compares

Advantage Component Systems, INC.'s 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.23x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2012-03-07

Last Inspection

2012-04-19

Inspection Span

1 yr

Violations / Inspection

2.0

Avg Penalty / Inspection

$1,813

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 2.0 violations per visit. That's $1,813 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

4

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$5,176

Current Penalty Amount

$3,625

Penalty Reduction

30.0%

What this shows Penalties were reduced by $1,551 from the initial assessment of $5,176. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Advantage Component Systems, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Advantage Component Systems, INC. Industry Avg
Inspections 2 2.6
Violations 4 8.0
Total Penalty $3,625 $15,763
Avg Penalty per Inspection $1,813 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Advantage Component Systems, INC., both outside KS so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($3,625 here).

Hogan Studios INC. $3,625 CA Jensen Bridge & Supply Company $3,625 MI Cornerstone Composites, INC. $3,625 WI Clayton Properties Group II, INC. $3,625 UT

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

First Marine, LLC, a Division of Western Rivers Boat Management, INC., Assumed Name for WRBM, LLC 2 insp. Calvert City, KY South Marine Systems, LLC 2 insp. Ashtabula, OH Woodgrain Millwork, INC. 2 insp. Montevallo, AL Great Dane - Wayne Plant 2 insp. Wayne, NE

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Hogan Studios INC.
Chico, CA
2 inspections $3,625
Jensen Bridge & Supply Company
Sandusky, MI
2 inspections $3,625
Cornerstone Composites, INC.
Milwaukee, WI
2 inspections $3,625
Clayton Properties Group II, INC.
Tooele, UT
2 inspections $3,625
Midwest Brass Forging CO.
Franklin Park, IL
2 inspections $3,625

Compare Advantage Component Systems, INC. vs Hogan Studios INC. side-by-side →

What to do with this record

Use Advantage Component Systems, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Advantage Component Systems, INC. against Hogan Studios INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Advantage Component Systems, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Advantage Component Systems, INC. safe to work at? ▼
Based on OSHA records, Advantage Component Systems, INC.'s workplace safety record is mixed, with some compliance concerns. The employer has 4 violations across 2 inspections, including 4 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Advantage Component Systems, INC. have? ▼
Advantage Component Systems, INC. has 4 OSHA violations on record, including 4 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $3,625.
How many OSHA inspections has Advantage Component Systems, INC. had? ▼
Advantage Component Systems, INC. has had 2 OSHA inspections, with the first recorded on 2012-03-07 and the most recent on 2012-04-19. This averages 2.0 violations per inspection.
What is the total penalty amount for Advantage Component Systems, INC.? ▼
Advantage Component Systems, INC. has been assessed $3,625 in current OSHA penalties, reduced from an initial assessment of $5,176 (a 30.0% reduction).
Does Advantage Component Systems, INC. have any serious or willful violations? ▼
Yes. Advantage Component Systems, INC. has 4 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Advantage Component Systems, INC. operate in? ▼
Advantage Component Systems, INC. operates in the Manufacturing sector (NAICS code 321912). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Advantage Component Systems, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Advantage Component Systems, INC. ranks #63,742 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Advantage Component Systems, INC.'s safety record compare to industry average? ▼
Advantage Component Systems, INC.'s total OSHA penalty of $3,625 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Cornerstone Composites, INC. in Milwaukee, WI is a similar manufacturing employer with $3,625 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.