PlainWorker
Employers › FL

Manufacturing · Orlando, FL

Advanced Millwork, INC.

According to OSHA enforcement records (2010–2026), Advanced Millwork, INC. ranks #54,741 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 7 violations across 3 inspections.

Lower half by penalty71% serious
$5,052
OSHA penalties
7
Violations cited
3
OSHA inspections
#54,741
of 99,447 penalized employers

Advanced Millwork, INC. in Orlando, FL has been the subject of 3 OSHA workplace inspections and 7 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $5,052. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Advanced Millwork, INC. 3 times over 1 year - more than twice a year on average. These inspections resulted in 7 violations, averaging 2.3 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #54,741 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 5 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Corvac Composites, LLC in Kentwood, MI is another manufacturing employer with 2 OSHA inspections on record and $5,050 in current penalties.

2.3
violations per inspection
71.4%
of violations were serious
#54,741
of 99,447 penalized employers

Compliance score

D 56/100
  • D OSHA safety compliance: 7 violations across 3 OSHA inspections (2.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Advanced Millwork, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Advanced Millwork, INC. runs moderately below peers (0.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$5,052 Top 45% most affordable more affordable than 55% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Advanced Millwork, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.03.710.81825.132.3OSHA inspectionsViolations citedVIBRACOUSTIC USA, IN…, OSHA inspections: 3 · Violations cited: 14Asap Pallets Inc., OSHA inspections: 3 · Violations cited: 15DAMON INDUSTRIES, OSHA inspections: 3 · Violations cited: 22SHANNON PACKAGING CO., OSHA inspections: 3 · Violations cited: 13FOCUS DIRECT, LLC, OSHA inspections: 3 · Violations cited: 29SALM PARTNERS LLC, OSHA inspections: 3 · Violations cited: 15PAMARCO GLOBAL GRAPH…, OSHA inspections: 3 · Violations cited: 21STYLEX SEATING, INC, OSHA inspections: 3 · Violations cited: 18AGE INDUSTRIES, LTD., OSHA inspections: 3 · Violations cited: 5SIELAFF CORPORATION, OSHA inspections: 3 · Violations cited: 7KELLEY MANUFACTURING…, OSHA inspections: 3 · Violations cited: 10JOHN DEERE COMPONENT…, OSHA inspections: 3 · Violations cited: 9GAMLET, INCORPORATED, OSHA inspections: 3 · Violations cited: 31ALUCHEM, INC., OSHA inspections: 3 · Violations cited: 14EMERALD CAROLINA CHE…, OSHA inspections: 3 · Violations cited: 21VOYLES OVERHEAD DOOR…, OSHA inspections: 3 · Violations cited: 19TAUBENSEE STEEL & WI…, OSHA inspections: 3 · Violations cited: 24COASTAL WOOD PRODUCT…, OSHA inspections: 3 · Violations cited: 18CARRY-ON TRAILER COR…, OSHA inspections: 3 · Violations cited: 16DOMTAR PAPER COMPANY…, OSHA inspections: 3 · Violations cited: 15Advanced Millwork, I…, OSHA inspections: 3 · Violations cited: 7
Advanced Millwork, INC. has 3 OSHA inspections on record and 7 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Advanced Millwork, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Advanced Millwork, INC. is the #22,905 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($5,052).

How Advanced Millwork, INC. Compares

Advanced Millwork, INC.'s 2.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.3x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2015-02-11

Last Inspection

2016-01-20

Inspection Span

1 yr

Violations / Inspection

2.3

Avg Penalty / Inspection

$1,684

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 1 year, averaging 2.3 violations per visit. That's $1,684 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

5

Serious

71.4% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

28.6% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$8,420

Current Penalty Amount

$5,052

Penalty Reduction

40.0%

What this shows Penalties were reduced by $3,368 from the initial assessment of $8,420. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Advanced Millwork, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Advanced Millwork, INC. Industry Avg
Inspections 3 2.6
Violations 7 8.0
Total Penalty $5,052 $15,763
Avg Penalty per Inspection $1,684 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Advanced Millwork, INC., both outside FL so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($5,052 here).

Custom Form INC $5,050 MI Kawasaki Tennessee INC $5,050 TN Corvac Composites, LLC $5,050 MI Cross Technologies Group $5,050 MI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Vibracoustic USA, INC. / Vibracoustic North America, L.P., Limited Partnership 3 insp. Manchester, NH Asap Pallets Inc. 3 insp. Franklin Park, IL Damon Industries 3 insp. Sparks, NV Shannon Packaging CO. 3 insp. Chino, CA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

J&D Sprinklers Co., Inc.
Clayton, NC
0 inspections $0
Louisiana Bayou Seafood
Eunice, LA
0 inspections $0
Custom Form INC
Hazel Park, MI
2 inspections $5,050
Kawasaki Tennessee INC
Morristown, TN
6 inspections $5,050
Corvac Composites, LLC
Kentwood, MI
2 inspections $5,050

Compare Advanced Millwork, INC. vs J&D Sprinklers Co., Inc. side-by-side →

What to do with this record

Use Advanced Millwork, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Advanced Millwork, INC. against J&D Sprinklers Co., Inc., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Advanced Millwork, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Advanced Millwork, INC. safe to work at? ▼
Based on OSHA records, Advanced Millwork, INC.'s workplace safety record is mixed, with some compliance concerns. The employer has 7 violations across 3 inspections, including 5 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Advanced Millwork, INC. have? ▼
Advanced Millwork, INC. has 7 OSHA violations on record, including 5 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $5,052.
How many OSHA inspections has Advanced Millwork, INC. had? ▼
Advanced Millwork, INC. has had 3 OSHA inspections, with the first recorded on 2015-02-11 and the most recent on 2016-01-20. This averages 2.3 violations per inspection.
What is the total penalty amount for Advanced Millwork, INC.? ▼
Advanced Millwork, INC. has been assessed $5,052 in current OSHA penalties, reduced from an initial assessment of $8,420 (a 40.0% reduction).
Does Advanced Millwork, INC. have any serious or willful violations? ▼
Yes. Advanced Millwork, INC. has 5 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Advanced Millwork, INC. operate in? ▼
Advanced Millwork, INC. operates in the Manufacturing sector (NAICS code 321918). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Advanced Millwork, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Advanced Millwork, INC. ranks #54,741 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Advanced Millwork, INC.'s safety record compare to industry average? ▼
Advanced Millwork, INC.'s total OSHA penalty of $5,052 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Corvac Composites, LLC in Kentwood, MI is a similar manufacturing employer with $5,050 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.