PlainWorker
Employers › GA

Manufacturing · Swainsboro, GA

Advanced Metal Components, INC.

According to OSHA enforcement records (2010–2026), Advanced Metal Components, INC. ranks #14,185 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 13 violations across 3 inspections.

Top 25% by penalty77% serious
$23,967
OSHA penalties
13
Violations cited
3
OSHA inspections
#14,185
of 99,447 penalized employers

Advanced Metal Components, INC. in Swainsboro, GA has been the subject of 3 OSHA workplace inspections and 13 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $23,967. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Advanced Metal Components, INC. 3 times across a longer 9-year span, an infrequent cadence. These inspections resulted in 13 violations, averaging 4.3 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #14,185 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 10 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Scicast International, INC. in Bechtelsville, PA is another manufacturing employer with 7 OSHA inspections on record and $23,966 in current penalties.

4.3
violations per inspection
76.9%
of violations were serious
#14,185
of 99,447 penalized employers

Compliance score

F 27/100
  • F OSHA safety compliance: 13 violations across 3 OSHA inspections (4.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Advanced Metal Components, INC. runs moderately above peers (1.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$23,967 Bottom 14% least affordable more affordable than 14% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Advanced Metal Components, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.00.39.719.028.437.7OSHA inspectionsViolations citedLM WIND POWER BLADES, OSHA inspections: 3 · Violations cited: 11MATERIALS TRANSPORTA…, OSHA inspections: 3 · Violations cited: 10NAN YA PLASTICS CORP…, OSHA inspections: 3 · Violations cited: 13AUSTIN FOAM PLASTICS…, OSHA inspections: 3 · Violations cited: 3CRAFT BREW ALLIANCE …, OSHA inspections: 3 · Violations cited: 21B & B AIRPARTS, INC., OSHA inspections: 3 · Violations cited: 9TYSON MEXICAN ORIGIN…, OSHA inspections: 3 · Violations cited: 36ALTAIR PARAMOUNT, LLC, OSHA inspections: 3 · Violations cited: 11DAIMLER TRUCKS NORTH…, OSHA inspections: 3 · Violations cited: 22FLORIDA BEEF INC, OSHA inspections: 3 · Violations cited: 2R & S MACHINING, OSHA inspections: 3 · Violations cited: 10ILLINOIS MACHINE & T…, OSHA inspections: 3 · Violations cited: 18PLATECO, INC., OSHA inspections: 3 · Violations cited: 6G & J PEPSI-COLA BOT…, OSHA inspections: 3 · Violations cited: 11WAYNE FARMS, LLC, OSHA inspections: 3 · Violations cited: 2BAILSCO BLADES & CAS…, OSHA inspections: 3 · Violations cited: 7THE CROSBY COMPANY, OSHA inspections: 3 · Violations cited: 10KRAFT HEINZ FOOD COM…, OSHA inspections: 3 · Violations cited: 8THREE S ENTERPRISES,…, OSHA inspections: 3 · Violations cited: 6GRUMA CORPORATION, OSHA inspections: 3 · Violations cited: 9Advanced Metal Compo…, OSHA inspections: 3 · Violations cited: 13
Advanced Metal Components, INC. has 3 OSHA inspections on record and 13 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Advanced Metal Components, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Advanced Metal Components, INC. is the #6,930 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($23,967).

How Advanced Metal Components, INC. Compares

Advanced Metal Components, INC.'s 4.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.5x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2010-12-29

Last Inspection

2019-10-31

Inspection Span

9 yrs

Violations / Inspection

4.3

Avg Penalty / Inspection

$7,989

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 9 years, averaging 4.3 violations per visit. That's $7,989 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

10

Serious

76.9% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

3

Other-Than-Serious

23.1% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$44,535

Current Penalty Amount

$23,967

Penalty Reduction

46.2%

What this shows Penalties were reduced by $20,568 from the initial assessment of $44,535. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Advanced Metal Components, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Advanced Metal Components, INC. Industry Avg
Inspections 3 2.6
Violations 13 8.0
Total Penalty $23,967 $15,763
Avg Penalty per Inspection $7,989 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Advanced Metal Components, INC., both outside GA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($23,967 here).

Unity Tube, INC. $23,968 OH Scicast International, INC. $23,966 PA Samson Equipment INC $23,965 NM Bolling Steel CO., INC. $23,960 VA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

LM Wind Power Blades 3 insp. Grand Forks, ND Materials Transportation Company 3 insp. Temple, TX Nan Ya Plastics Corporation USA 3 insp. Wharton, TX Austin Foam Plastics, INC. 3 insp. Pflugerville, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Unity Tube, INC.
East Palestine, OH
2 inspections $23,968
Scicast International, INC.
Bechtelsville, PA
7 inspections $23,966
Samson Equipment INC
Las Cruces, NM
2 inspections $23,965
Bolling Steel CO., INC.
Salem, VA
7 inspections $23,960
Spears Coastline Plastics, LLC
Pulaski, TN
2 inspections $23,960

Compare Advanced Metal Components, INC. vs Unity Tube, INC. side-by-side →

What to do with this record

Use Advanced Metal Components, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Advanced Metal Components, INC. against Unity Tube, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Advanced Metal Components, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Advanced Metal Components, INC. safe to work at? ▼
Based on OSHA records, Advanced Metal Components, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 13 violations across 3 inspections, including 10 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Advanced Metal Components, INC. have? ▼
Advanced Metal Components, INC. has 13 OSHA violations on record, including 10 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $23,967.
How many OSHA inspections has Advanced Metal Components, INC. had? ▼
Advanced Metal Components, INC. has had 3 OSHA inspections, with the first recorded on 2010-12-29 and the most recent on 2019-10-31. This averages 4.3 violations per inspection.
What is the total penalty amount for Advanced Metal Components, INC.? ▼
Advanced Metal Components, INC. has been assessed $23,967 in current OSHA penalties, reduced from an initial assessment of $44,535 (a 46.2% reduction).
Does Advanced Metal Components, INC. have any serious or willful violations? ▼
Yes. Advanced Metal Components, INC. has 10 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Advanced Metal Components, INC. operate in? ▼
Advanced Metal Components, INC. operates in the Manufacturing sector (NAICS code 332322). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Advanced Metal Components, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Advanced Metal Components, INC. ranks #14,185 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Advanced Metal Components, INC.'s safety record compare to industry average? ▼
Advanced Metal Components, INC.'s total OSHA penalty of $23,967 is above the Manufacturing industry average of $15,763 per employer (1.5x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Scicast International, INC. in Bechtelsville, PA is a similar manufacturing employer with $23,966 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.