PlainWorker
Employers › GA

Manufacturing · Newnan, GA

Advanced Machine Shop, INC

According to OSHA enforcement records (2010–2026), Advanced Machine Shop, INC ranks #66,296 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 4 violations across 2 inspections.

Lower half by penalty75% serious
$3,259
OSHA penalties
4
Violations cited
2
OSHA inspections
#66,296
of 99,447 penalized employers

Advanced Machine Shop, INC in Newnan, GA has been the subject of 2 OSHA workplace inspections and 4 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $3,259. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Advanced Machine Shop, INC 2 times over 4 years, roughly once every couple of years. These inspections resulted in 4 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #66,296 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Sweetrain (HQ) in Los Angeles, CA is another manufacturing employer with 0 OSHA inspections on record and $0 in current penalties.

2.0
violations per inspection
75.0%
of violations were serious
#66,296
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 4 violations across 2 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Advanced Machine Shop, INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Advanced Machine Shop, INC runs well below peers (0.21x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$3,259 Top 33% most affordable more affordable than 67% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Advanced Machine Shop, INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0012.625.237.850.4OSHA inspectionsViolations cited3M COMPANY, OSHA inspections: 2 · Violations cited: 1OCEAN SASH & DOOR, I…, OSHA inspections: 2 · Violations cited: 39D & D SERVICES INC, OSHA inspections: 2 · Violations cited: 42N & S SUPPLY, OSHA inspections: 2 · Violations cited: 17QUALITY STONE VENEER…, OSHA inspections: 2 · Violations cited: 48HANKINS LUMBER COMPA…, OSHA inspections: 2 · Violations cited: 12IPG, INC., OSHA inspections: 2 · Violations cited: 8CELLU TISSUE CORPORA…, OSHA inspections: 2 · Violations cited: 23TEXTOOL COMPANY, LLC, OSHA inspections: 2 · Violations cited: 36EPIX TUBE CO., INC., OSHA inspections: 2 · Violations cited: 8PACUR, LLC, OSHA inspections: 2 · Violations cited: 10DRIL-QUIP, INC., OSHA inspections: 2 · Violations cited: 10CMC POLYMERS LLC, OSHA inspections: 2 · Violations cited: 17VALLEY FINE FOODS LLC, OSHA inspections: 2 · Violations cited: 3ACCURATE FAB, OSHA inspections: 2 · Violations cited: 18ICICLE SEAFOODS, INC., OSHA inspections: 2 · Violations cited: 6FRESH & READY FOODS …, OSHA inspections: 2 · Violations cited: 15RESIDENTIAL DESIGN S…, OSHA inspections: 2 · Violations cited: 10JBS FIVE RIVERS CATT…, OSHA inspections: 2 · Violations cited: 7QUALITY TRAILERS ENT…, OSHA inspections: 2 · Violations cited: 22Advanced Machine Sho…, OSHA inspections: 2 · Violations cited: 4
Advanced Machine Shop, INC has 2 OSHA inspections on record and 4 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Advanced Machine Shop, INC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Advanced Machine Shop, INC ranks #26,680 at $3,259 current penalty.

How Advanced Machine Shop, INC Compares

Advanced Machine Shop, INC's 2.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.21x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2014-07-09

Last Inspection

2018-08-29

Inspection Span

4 yrs

Violations / Inspection

2.0

Avg Penalty / Inspection

$1,630

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 4 years, averaging 2.0 violations per visit. That's $1,630 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

3

Serious

75.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

25.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$5,431

Current Penalty Amount

$3,259

Penalty Reduction

40.0%

What this shows Penalties were reduced by $2,172 from the initial assessment of $5,431. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Advanced Machine Shop, INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Advanced Machine Shop, INC Industry Avg
Inspections 2 2.6
Violations 4 8.0
Total Penalty $3,259 $15,763
Avg Penalty per Inspection $1,630 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Advanced Machine Shop, INC, both outside GA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($3,259 here).

Diversified Millwork, INC $3,260 NJ New Pride Corporation DBA NPC $3,260 CA Ziething Cabinets INC $3,260 CA Sicpa Securink Corporation $3,255 VA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

3m Company 2 insp. Menomonie, WI Ocean Sash & Door, INC. 2 insp. San Francisco, CA D & D Services INC 2 insp. Vernon, CA N & S Supply 2 insp. Milton, NY

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Diversified Millwork, INC
Hammonton, NJ
2 inspections $3,260
New Pride Corporation DBA NPC
Oakland, CA
2 inspections $3,260
Ziething Cabinets INC
Costa Mesa, CA
2 inspections $3,260
Mingo Wood Products
Lenore, WV
0 inspections $0
Sweetrain (HQ)
Los Angeles, CA
0 inspections $0

Compare Advanced Machine Shop, INC vs Diversified Millwork, INC side-by-side →

What to do with this record

Use Advanced Machine Shop, INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Advanced Machine Shop, INC against Diversified Millwork, INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Advanced Machine Shop, INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Advanced Machine Shop, INC safe to work at? ▼
Based on OSHA records, Advanced Machine Shop, INC's workplace safety record is mixed, with some compliance concerns. The employer has 4 violations across 2 inspections, including 3 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Advanced Machine Shop, INC have? ▼
Advanced Machine Shop, INC has 4 OSHA violations on record, including 3 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $3,259.
How many OSHA inspections has Advanced Machine Shop, INC had? ▼
Advanced Machine Shop, INC has had 2 OSHA inspections, with the first recorded on 2014-07-09 and the most recent on 2018-08-29. This averages 2.0 violations per inspection.
What is the total penalty amount for Advanced Machine Shop, INC? ▼
Advanced Machine Shop, INC has been assessed $3,259 in current OSHA penalties, reduced from an initial assessment of $5,431 (a 40.0% reduction).
Does Advanced Machine Shop, INC have any serious or willful violations? ▼
Yes. Advanced Machine Shop, INC has 3 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Advanced Machine Shop, INC operate in? ▼
Advanced Machine Shop, INC operates in the Manufacturing sector (NAICS code 333517). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Advanced Machine Shop, INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Advanced Machine Shop, INC ranks #66,296 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Advanced Machine Shop, INC's safety record compare to industry average? ▼
Advanced Machine Shop, INC's total OSHA penalty of $3,259 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Sweetrain (HQ) in Los Angeles, CA is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.