PlainWorker
Employers › TN

Manufacturing · Nashville, TN

Ace Machine and Metal Fabrication Company INC

According to OSHA enforcement records (2010–2026), Ace Machine and Metal Fabrication Company INC ranks #27,725 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 45 violations across 3 inspections.

Upper half by penalty53% serious
$13,010
OSHA penalties
45
Violations cited
3
OSHA inspections
#27,725
of 99,447 penalized employers

Ace Machine and Metal Fabrication Company INC in Nashville, TN has been the subject of 3 OSHA workplace inspections and 45 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $13,010. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Ace Machine and Metal Fabrication Company INC 3 times over 3 years, roughly annually. These inspections turned up 45 violations, averaging 15.0 per inspection - an extremely dense concentration of citations. According to OSHA enforcement records, its total current penalty ranks #27,725 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 24 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Hearthside Food Solutions, LLC in Bolingbrook, IL is another manufacturing employer with 3 OSHA inspections on record and $13,005 in current penalties.

15.0
violations per inspection
53.3%
of violations were serious
#27,725
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 45 violations across 3 OSHA inspections (15.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Ace Machine and Metal Fabrication Company INC sits roughly in line with peers (0.8x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$13,010 Bottom 28% least affordable more affordable than 28% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Ace Machine and Metal Fabrication Company INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.0017.334.651.969.2OSHA inspectionsViolations citedHUSQVARNA CONSUMER O…, OSHA inspections: 3 · Violations cited: 66LOGOPLASTE, LLC, OSHA inspections: 3 · Violations cited: 10BCI ACRYLIC, INC., OSHA inspections: 3 · Violations cited: 9REYES AUTOMOTIVE GRO…, OSHA inspections: 3 · Violations cited: 20TRANE TECHNOLOGIES C…, OSHA inspections: 3 · Violations cited: 3CUTLER HAMMER ELECTR…, OSHA inspections: 3 · Violations cited: 25A&B PRECISION METALS…, OSHA inspections: 3 · Violations cited: 8STEVEN-ROBERT ORIGIN…, OSHA inspections: 3 · Violations cited: 7AHF PRODUCTS, OSHA inspections: 3 · Violations cited: 6BREAD PARTNERS, INC., OSHA inspections: 3 · Violations cited: 22ARCHER-DANIELS-MIDLA…, OSHA inspections: 3 · Violations cited: 10SOLAR PRODUCTS INC, OSHA inspections: 3 · Violations cited: 6M & E MFG. CO., INC., OSHA inspections: 3 · Violations cited: 15BELTSERVICE CORPORAT…, OSHA inspections: 3 · Violations cited: 5MIDNIGHT EXPRESS POW…, OSHA inspections: 3 · Violations cited: 9STONE CONCEPTS INC., OSHA inspections: 3 · Violations cited: 12CHILLICOTHE METAL CO…, OSHA inspections: 3 · Violations cited: 5JULIET MARIE PERRY, OSHA inspections: 3 · Violations cited: 6PROAMPAC HOLDINGS LLC, OSHA inspections: 3 · Violations cited: 5INTEGRICO COMPOSITES, OSHA inspections: 3 · Violations cited: 7Ace Machine and Meta…, OSHA inspections: 3 · Violations cited: 45
Ace Machine and Metal Fabrication Company INC has 3 OSHA inspections on record and 45 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Ace Machine and Metal Fabrication Company INC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Ace Machine and Metal Fabrication Company INC ranks #12,898 at $13,010 current penalty.

How Ace Machine and Metal Fabrication Company INC Compares

Ace Machine and Metal Fabrication Company INC's 15.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (0.8x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2010-07-09

Last Inspection

2013-06-26

Inspection Span

3 yrs

Violations / Inspection

15.0

Avg Penalty / Inspection

$4,337

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 3 years, averaging 15.0 violations per visit. That's $4,337 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

24

Serious

53.3% of total

0

Willful

0.0% of total

10

Repeat

22.2% of total

11

Other-Than-Serious

24.4% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$15,700

Current Penalty Amount

$13,010

Penalty Reduction

17.1%

What this shows Penalties were reduced by $2,690 from the initial assessment of $15,700. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Ace Machine and Metal Fabrication Company INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Ace Machine and Metal Fabrication Company INC Industry Avg
Inspections 3 2.6
Violations 45 8.0
Total Penalty $13,010 $15,763
Avg Penalty per Inspection $4,337 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Ace Machine and Metal Fabrication Company INC, both outside TN so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($13,010 here).

Jeld-Wen Door Systems $13,012 IA Conn-Selmer, INC. $13,013 IN Hearthside Food Solutions, LLC $13,005 IL Peco Foods, INC. $13,005 MS

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Husqvarna Consumer Outdoor Products N a INC 3 insp. Orangeburg, SC Logoplaste, LLC 3 insp. Kansas City, MO Bci Acrylic, INC. 3 insp. Libertyville, IL Reyes Automotive Group, LLC 3 insp. San Antonio, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Jeld-Wen Door Systems
Grinnell, IA
2 inspections $13,012
Conn-Selmer, INC.
Elkhart, IN
2 inspections $13,013
Hearthside Food Solutions, LLC
Bolingbrook, IL
3 inspections $13,005
Peco Foods, INC.
Philadelphia, MS
2 inspections $13,005
BGF Industries, INC.
Altavista, VA
5 inspections $13,004

Compare Ace Machine and Metal Fabrication Company INC vs Jeld-Wen Door Systems side-by-side →

What to do with this record

Use Ace Machine and Metal Fabrication Company INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Ace Machine and Metal Fabrication Company INC against Jeld-Wen Door Systems, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Ace Machine and Metal Fabrication Company INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Ace Machine and Metal Fabrication Company INC safe to work at? ▼
Based on OSHA records, Ace Machine and Metal Fabrication Company INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 45 violations across 3 inspections, including 24 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Ace Machine and Metal Fabrication Company INC have? ▼
Ace Machine and Metal Fabrication Company INC has 45 OSHA violations on record, including 24 serious, 0 willful, and 10 repeat violations. The total current penalty amount is $13,010.
How many OSHA inspections has Ace Machine and Metal Fabrication Company INC had? ▼
Ace Machine and Metal Fabrication Company INC has had 3 OSHA inspections, with the first recorded on 2010-07-09 and the most recent on 2013-06-26. This averages 15.0 violations per inspection.
What is the total penalty amount for Ace Machine and Metal Fabrication Company INC? ▼
Ace Machine and Metal Fabrication Company INC has been assessed $13,010 in current OSHA penalties, reduced from an initial assessment of $15,700 (a 17.1% reduction).
Does Ace Machine and Metal Fabrication Company INC have any serious or willful violations? ▼
Yes. Ace Machine and Metal Fabrication Company INC has 24 serious violations, and 10 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Ace Machine and Metal Fabrication Company INC operate in? ▼
Ace Machine and Metal Fabrication Company INC operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Ace Machine and Metal Fabrication Company INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Ace Machine and Metal Fabrication Company INC ranks #27,725 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Ace Machine and Metal Fabrication Company INC's safety record compare to industry average? ▼
Ace Machine and Metal Fabrication Company INC's total OSHA penalty of $13,010 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Hearthside Food Solutions, LLC in Bolingbrook, IL is a similar manufacturing employer with $13,005 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.