PlainWorker
Employers › CT

Manufacturing · New Britain, CT

Accurate Brazing of CT, LLC

According to OSHA enforcement records (2010–2026), Accurate Brazing of CT, LLC ranks #54,602 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 6 violations across 2 inspections.

Lower half by penalty100% serious
$5,100
OSHA penalties
6
Violations cited
2
OSHA inspections
#54,602
of 99,447 penalized employers

Accurate Brazing of CT, LLC in New Britain, CT has been the subject of 2 OSHA workplace inspections and 6 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $5,100. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Accurate Brazing of CT, LLC 2 times over 1 year - more than twice a year on average. These inspections resulted in 6 violations, averaging 3.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #54,602 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 6 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Tamko Building Products in Joplin, MO is another manufacturing employer with 2 OSHA inspections on record and $5,100 in current penalties.

3.0
violations per inspection
100.0%
of violations were serious
#54,602
of 99,447 penalized employers

Compliance score

F 46/100
  • F OSHA safety compliance: 6 violations across 2 OSHA inspections (3.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Accurate Brazing of CT, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Accurate Brazing of CT, LLC runs moderately below peers (0.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$5,100 Top 45% most affordable more affordable than 55% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Accurate Brazing of CT, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.01.69.116.523.931.4OSHA inspectionsViolations citedALL FAB PRECISION SH…, OSHA inspections: 2 · Violations cited: 3TRIDENT SEAFOODS COR…, OSHA inspections: 2 · Violations cited: 21SYMRISE INC., OSHA inspections: 2 · Violations cited: 12SCURLOCK HOLDINGS, I…, OSHA inspections: 2 · Violations cited: 7NEW ENGLAND WIRE PRO…, OSHA inspections: 2 · Violations cited: 8HOWELL METAL COMPANY, OSHA inspections: 2 · Violations cited: 6EVAPCO, INC., OSHA inspections: 2 · Violations cited: 7LITTLE ENTERPRISES, …, OSHA inspections: 2 · Violations cited: 24JCM ENGINEERING CORP, OSHA inspections: 2 · Violations cited: 4NEIL ENTERPRISES, INC., OSHA inspections: 2 · Violations cited: 14CUSTOM FAB, INC., OSHA inspections: 2 · Violations cited: 15JAMES WEIR, OSHA inspections: 2 · Violations cited: 17OLAM WEST COAST, INC., OSHA inspections: 2 · Violations cited: 6THE MERCHANT OF TENN…, OSHA inspections: 2 · Violations cited: 8BIG RIVER SHIPBUILDE…, OSHA inspections: 2 · Violations cited: 30ATI ALLVAC, OSHA inspections: 2 · Violations cited: 8ARMOR LITE TRAILERS …, OSHA inspections: 2 · Violations cited: 27VEXAPAK, LLC, OSHA inspections: 2 · Violations cited: 5DHO, LLC, OSHA inspections: 2 · Violations cited: 1621ST CENTURY SIGNS, OSHA inspections: 2 · Violations cited: 9Accurate Brazing of …, OSHA inspections: 2 · Violations cited: 6
Accurate Brazing of CT, LLC has 2 OSHA inspections on record and 6 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Accurate Brazing of CT, LLC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Accurate Brazing of CT, LLC ranks #22,817 at $5,100 current penalty.

How Accurate Brazing of CT, LLC Compares

Accurate Brazing of CT, LLC's 3.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.3x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2010-03-08

Last Inspection

2010-03-08

Inspection Span

1 yr

Violations / Inspection

3.0

Avg Penalty / Inspection

$2,550

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 3.0 violations per visit. That's $2,550 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

6

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$5,100

Current Penalty Amount

$5,100

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Accurate Brazing of CT, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Accurate Brazing of CT, LLC Industry Avg
Inspections 2 2.6
Violations 6 8.0
Total Penalty $5,100 $15,763
Avg Penalty per Inspection $2,550 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Accurate Brazing of CT, LLC, both outside CT so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($5,100 here).

Kennedy Tank & Manufacturing Company, INC, $5,100 IL Jarrett Concrete Products and Supply INC $5,100 TN Glanbia Foods INC. $5,100 ID Rome Specialty Company, INC. $5,100 NY

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

All Fab Precision Sheetmetal, INC. 2 insp. Fairburn, GA Trident Seafoods Corporation 2 insp. Kodiak, AK Symrise INC. 2 insp. Branchburg, NJ Scurlock Holdings, INC. 2 insp. Jonesboro, AR

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Tamko Building Products
Joplin, MO
2 inspections $5,100
Windsor Foods
Oakland, MS
2 inspections $5,100
Summit Stone Works, INC.
Silverthorne, CO
2 inspections $5,100
Boeing SVS INC
Seattle, WA
5 inspections $5,100
Powertrain Product & Chassis LLC
Detroit, MI
4 inspections $5,100

Compare Accurate Brazing of CT, LLC vs Tamko Building Products side-by-side →

What to do with this record

Use Accurate Brazing of CT, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Accurate Brazing of CT, LLC against Tamko Building Products, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Accurate Brazing of CT, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Accurate Brazing of CT, LLC safe to work at? ▼
Based on OSHA records, Accurate Brazing of CT, LLC's workplace safety record is mixed, with some compliance concerns. The employer has 6 violations across 2 inspections, including 6 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Accurate Brazing of CT, LLC have? ▼
Accurate Brazing of CT, LLC has 6 OSHA violations on record, including 6 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $5,100.
How many OSHA inspections has Accurate Brazing of CT, LLC had? ▼
Accurate Brazing of CT, LLC has had 2 OSHA inspections, with the first recorded on 2010-03-08 and the most recent on 2010-03-08. This averages 3.0 violations per inspection.
What is the total penalty amount for Accurate Brazing of CT, LLC? ▼
Accurate Brazing of CT, LLC has been assessed $5,100 in current OSHA penalties.
Does Accurate Brazing of CT, LLC have any serious or willful violations? ▼
Yes. Accurate Brazing of CT, LLC has 6 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Accurate Brazing of CT, LLC operate in? ▼
Accurate Brazing of CT, LLC operates in the Manufacturing sector (NAICS code 332811). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Accurate Brazing of CT, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Accurate Brazing of CT, LLC ranks #54,602 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Accurate Brazing of CT, LLC's safety record compare to industry average? ▼
Accurate Brazing of CT, LLC's total OSHA penalty of $5,100 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Tamko Building Products in Joplin, MO is a similar manufacturing employer with $5,100 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.