PlainWorker
Employers › WI

Manufacturing · Wisconsin Rapids, WI

3d Idapro Solutions, LLC

According to OSHA enforcement records (2010–2026), 3d Idapro Solutions, LLC ranks #24,832 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 3 violations across 3 inspections.

Top 25% by penalty67% serious
$14,551
OSHA penalties
3
Violations cited
3
OSHA inspections
#24,832
of 99,447 penalized employers

3d Idapro Solutions, LLC in Wisconsin Rapids, WI has been the subject of 3 OSHA workplace inspections and 3 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $14,551. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected 3d Idapro Solutions, LLC 3 times over 1 year - more than twice a year on average. These inspections resulted in 3 violations, averaging 1.0 per inspection. According to OSHA enforcement records, its total current penalty ranks #24,832 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Eftec North America in Taylor, MI is another manufacturing employer with 7 OSHA inspections on record and $14,550 in current penalties.

1.0
violations per inspection
66.7%
of violations were serious
#24,832
of 99,447 penalized employers

Compliance score

C 75/100
  • C OSHA safety compliance: 3 violations across 3 OSHA inspections (1.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How 3d Idapro Solutions, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows 3d Idapro Solutions, LLC sits roughly in line with peers (0.9x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$14,551 Bottom 25% least affordable more affordable than 25% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is 3d Idapro Solutions, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.01.410.21927.836.6OSHA inspectionsViolations citedGRIFFIN PIPE PRODUCT…, OSHA inspections: 3 · Violations cited: 4FLEMISH MASTER WEAVERS, OSHA inspections: 3 · Violations cited: 11NORFLEET QUALITY LLC, OSHA inspections: 3 · Violations cited: 35ANCHOR GLASS CONTAIN…, OSHA inspections: 3 · Violations cited: 33INTERNATIONAL MARMOL…, OSHA inspections: 3 · Violations cited: 32SMITH & SMITH AIRCRA…, OSHA inspections: 3 · Violations cited: 23PLATT & LABONIA COMP…, OSHA inspections: 3 · Violations cited: 9GRAPHIC PACKAGING IN…, OSHA inspections: 3 · Violations cited: 5POLYCEL STRUCTURAL F…, OSHA inspections: 3 · Violations cited: 10DECCO CASTINGS INC, OSHA inspections: 3 · Violations cited: 15KENNEDY CONCRETE INC., OSHA inspections: 3 · Violations cited: 20SUN MOUNTAIN, INC., OSHA inspections: 3 · Violations cited: 16LEE CONTAINER IOWA, …, OSHA inspections: 3 · Violations cited: 10DORMAKABA USA INC., OSHA inspections: 3 · Violations cited: 8STORK H&E TURBO BLAD…, OSHA inspections: 3 · Violations cited: 13WEABER, INC., OSHA inspections: 3 · Violations cited: 10FWT, LLC, OSHA inspections: 3 · Violations cited: 5METAL CULVERTS INC., OSHA inspections: 3 · Violations cited: 6COMMERCIAL RESINS CO…, OSHA inspections: 3 · Violations cited: 25ALABAMA SPECIALTY PR…, OSHA inspections: 3 · Violations cited: 103d Idapro Solutions,…, OSHA inspections: 3 · Violations cited: 3
3d Idapro Solutions, LLC has 3 OSHA inspections on record and 3 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

3d Idapro Solutions, LLC in the Manufacturing enforcement ledger

In Manufacturing, 3d Idapro Solutions, LLC sits at penalty rank #11,706 of 35,243 penalized establishments ($14,551 assessed).

How 3d Idapro Solutions, LLC Compares

3d Idapro Solutions, LLC's 1.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (0.9x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2017-12-04

Last Inspection

2018-07-11

Inspection Span

1 yr

Violations / Inspection

1.0

Avg Penalty / Inspection

$4,850

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 1 year, averaging 1.0 violations per visit. That's $4,850 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

66.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

33.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$20,787

Current Penalty Amount

$14,551

Penalty Reduction

30.0%

What this shows Penalties were reduced by $6,236 from the initial assessment of $20,787. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How 3d Idapro Solutions, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric 3d Idapro Solutions, LLC Industry Avg
Inspections 3 2.6
Violations 3 8.0
Total Penalty $14,551 $15,763
Avg Penalty per Inspection $4,850 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for 3d Idapro Solutions, LLC, both outside WI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($14,551 here).

Brutsche Concrete Products Company $14,550 MI Midwest Goods, INC. $14,550 IL Eftec North America $14,550 MI Keystone Foods LLC DBA Equity Group $14,550 NC

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Griffin Pipe Products CO., LLC 3 insp. Lynchburg, VA Flemish Master Weavers 3 insp. Sanford, ME Norfleet Quality LLC 3 insp. Fredericksburg, VA Anchor Glass Container CORP. 3 insp. Warner Robins, GA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Brutsche Concrete Products Company
Battle Creek, MI
3 inspections $14,550
Midwest Goods, INC.
Bensenville, IL
2 inspections $14,550
Eftec North America
Taylor, MI
7 inspections $14,550
Keystone Foods LLC DBA Equity Group
Reidsville, NC
4 inspections $14,550
Budget Wire and Display
Walton Hills, OH
2 inspections $14,550

Compare 3d Idapro Solutions, LLC vs Brutsche Concrete Products Company side-by-side →

What to do with this record

Use 3d Idapro Solutions, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare 3d Idapro Solutions, LLC against Brutsche Concrete Products Company, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether 3d Idapro Solutions, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is 3d Idapro Solutions, LLC safe to work at? ▼
Based on OSHA records, 3d Idapro Solutions, LLC's workplace safety record is relatively clean, with fewer violations than typical. The employer has 3 violations across 3 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does 3d Idapro Solutions, LLC have? ▼
3d Idapro Solutions, LLC has 3 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $14,551.
How many OSHA inspections has 3d Idapro Solutions, LLC had? ▼
3d Idapro Solutions, LLC has had 3 OSHA inspections, with the first recorded on 2017-12-04 and the most recent on 2018-07-11. This averages 1.0 violations per inspection.
What is the total penalty amount for 3d Idapro Solutions, LLC? ▼
3d Idapro Solutions, LLC has been assessed $14,551 in current OSHA penalties, reduced from an initial assessment of $20,787 (a 30.0% reduction).
Does 3d Idapro Solutions, LLC have any serious or willful violations? ▼
Yes. 3d Idapro Solutions, LLC has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does 3d Idapro Solutions, LLC operate in? ▼
3d Idapro Solutions, LLC operates in the Manufacturing sector (NAICS code 311423). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does 3d Idapro Solutions, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, 3d Idapro Solutions, LLC ranks #24,832 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does 3d Idapro Solutions, LLC's safety record compare to industry average? ▼
3d Idapro Solutions, LLC's total OSHA penalty of $14,551 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Eftec North America in Taylor, MI is a similar manufacturing employer with $14,550 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.