PlainWorker
Employers › OR

Retail Trade · Cave Junction, OR

3d Hardware INC

According to OSHA enforcement records (2010–2026), 3d Hardware INC ranks #99,306 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 6 violations across 3 inspections.

Lower half by penalty17% serious
$100
OSHA penalties
6
Violations cited
3
OSHA inspections
#99,306
of 99,447 penalized employers

3d Hardware INC in Cave Junction, OR has been the subject of 3 OSHA workplace inspections and 6 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $100. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected 3d Hardware INC 3 times over 4 years, roughly once every couple of years. These inspections resulted in 6 violations, averaging 2.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #99,306 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Retail Trade industry average of 1 inspections per employer, this runs well above peers (3.7x the sector average) on inspection frequency. For comparison, New Fashion World Corporation in Mayaguez, PR is another retail trade employer with 2 OSHA inspections on record and $100 in current penalties.

2.0
violations per inspection
16.7%
of violations were serious
#99,306
of 99,447 penalized employers

Compliance score

D 61/100
  • D OSHA safety compliance: 6 violations across 3 OSHA inspections (2.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How 3d Hardware INC compares on OSHA penalties

Total current penalty vs the Retail Trade per-employer average

in penalties

What this shows 3d Hardware INC runs well below peers (0.03x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$100 Top 1% most affordable more affordable than 100% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Retail Trade employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is 3d Hardware INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.005.310.515.821OSHA inspectionsViolations citedSAVE MART SUPERMARKE…, OSHA inspections: 3 · Violations cited: 3MILAEGER'S, INC., OSHA inspections: 3 · Violations cited: 4ALENCO DBA PLYGEM, OSHA inspections: 3 · Violations cited: 12MITCHELL ELLIS PRODU…, OSHA inspections: 3 · Violations cited: 9MADISON TRUCK EQUIPM…, OSHA inspections: 3 · Violations cited: 7CVS HEALTH, OSHA inspections: 3 · Violations cited: 8RURAL KING ADMINISTR…, OSHA inspections: 3 · Violations cited: 7H-E-B DISTRIBUTION C…, OSHA inspections: 3 · Violations cited: 0WALMART INC STORE 4309, OSHA inspections: 3 · Violations cited: 0WALMART INC, OSHA inspections: 3 · Violations cited: 2LHV INC., OSHA inspections: 3 · Violations cited: 20FRANK E WARD CO. LLC, OSHA inspections: 3 · Violations cited: 7KINGS BUILDING MATER…, OSHA inspections: 3 · Violations cited: 11HOME DEPOT U.S.A., I…, OSHA inspections: 3 · Violations cited: 6WHOLE FOODS MARKETIN…, OSHA inspections: 3 · Violations cited: 6THE HOME DEPOT, OSHA inspections: 3 · Violations cited: 0DEFENSE COMMISSARY A…, OSHA inspections: 3 · Violations cited: 5Smokehouse Pet Produ…, OSHA inspections: 3 · Violations cited: 10MARGOLIN SHOES, INC., OSHA inspections: 3 · Violations cited: 6ATS OF ALABAMA LLC, OSHA inspections: 3 · Violations cited: 93d Hardware INC, OSHA inspections: 3 · Violations cited: 6
3d Hardware INC has 3 OSHA inspections on record and 6 violations cited. The crosshair marks the median among these Retail Trade peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

3d Hardware INC in the Retail Trade enforcement ledger

Retail Trade sector: 3d Hardware INC is the #3,124 heaviest OSHA penalty carrier of 3,175 employers with nonzero fines ($100).

How 3d Hardware INC Compares

3d Hardware INC's 2.00 violations per inspection compares to the Retail Trade sector average of 1.7 violations per employer.

Against the Retail Trade industry average of $2,898 per employer, this employer's current OSHA penalty runs well below peers (0.03x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2010-05-11

Last Inspection

2014-05-27

Inspection Span

4 yrs

Violations / Inspection

2.0

Avg Penalty / Inspection

$33

Industry Avg / Inspection

$3,571

What this shows 3 inspections over 4 years, averaging 2.0 violations per visit. That's $33 per inspection vs. the Retail Trade average of $3,571.

Enforcement detail

Violation Breakdown

1

Serious

16.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

83.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$100

Current Penalty Amount

$100

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Retail Trade

How 3d Hardware INC compares to the Retail Trade sector, which has 12,945 employers tracked by PlainWorker.

Metric 3d Hardware INC Industry Avg
Inspections 3 0.8
Violations 6 1.7
Total Penalty $100 $2,898
Avg Penalty per Inspection $33 $3,571
View all 12,945 employers in Retail Trade →

Nationwide Retail Trade peers with similar penalties or inspection counts

Two OSHA-record peer sets for 3d Hardware INC, both outside OR so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($100 here).

Bridges Hardware, INC. $100 NC New Fashion World Corporation $100 PR Designers' Choice Furniture Gallaries, INC. $100 NC Lowes H I W INC $100 WA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Save Mart Supermarkets, Store #602 3 insp. Chico, CA Milaeger's, INC. 3 insp. Racine, WI Alenco DBA Plygem 3 insp. Peachtree City, GA Mitchell Ellis Products, INC. 3 insp. Semmes, AL

Nearby & Similar Employers in Retail Trade

Showing 5 of 12944 other employers tracked in this sector.

R & S Supply INC
Medford, OR
2 inspections $100
New Fashion World Corporation
Mayaguez, PR
2 inspections $100
Lowes H I W INC
Moses Lake, WA
2 inspections $100
Wal-Mart Stores, INC.
Granite Falls, NC
2 inspections $100
Lighting Supply INC
Seattle, WA
2 inspections $100

Compare 3d Hardware INC vs R & S Supply INC side-by-side →

What to do with this record

Use 3d Hardware INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare 3d Hardware INC against R & S Supply INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether 3d Hardware INC's inspection and penalty record is typical for Retail Trade or an outlier against the sector's own average. View the Retail Trade sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is 3d Hardware INC safe to work at? ▼
Based on OSHA records, 3d Hardware INC's workplace safety record is mixed, with some compliance concerns. The employer has 6 violations across 3 inspections, including 1 serious violations. Compared to Retail Trade industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does 3d Hardware INC have? ▼
3d Hardware INC has 6 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $100.
How many OSHA inspections has 3d Hardware INC had? ▼
3d Hardware INC has had 3 OSHA inspections, with the first recorded on 2010-05-11 and the most recent on 2014-05-27. This averages 2.0 violations per inspection.
What is the total penalty amount for 3d Hardware INC? ▼
3d Hardware INC has been assessed $100 in current OSHA penalties.
Does 3d Hardware INC have any serious or willful violations? ▼
Yes. 3d Hardware INC has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does 3d Hardware INC operate in? ▼
3d Hardware INC operates in the Retail Trade sector (NAICS code 444130). This industry has 12,945 employers tracked by PlainWorker, with 10,505 total OSHA inspections and $37.51M in cumulative penalties.
Where does 3d Hardware INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, 3d Hardware INC ranks #99,306 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does 3d Hardware INC's safety record compare to industry average? ▼
3d Hardware INC's total OSHA penalty of $100 is below the Retail Trade industry average of $2,898 per employer. The employer has 3 inspections compared to the industry average of 0.8 per employer. For a direct comparison, New Fashion World Corporation in Mayaguez, PR is a similar retail trade employer with $100 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.